How to sew jeans with your own hands.

Even if you are a lucky owner of a super-standard figure, you must at least once have wondered: how to sew jeans? And it's not about the cases when the thing was bought not in size. Happens, on thin legs it is difficult to pick up trousers "in obtjag". It happens that the model does not suit the width of the trousers. And there is such that jeans sit perfectly, but here in the waist a little povschat, the reason for this - the features of the figure.

So, if you do not know how to zuzit jeans at home - this is not an excuse to carry them to the atelier. There for such a service take so much that it is easier to buy new ones. It's decided! We get the sewing machine, thread, tailor's chalk, scissors and tailor's pins (those with round heads).

How to sew jeans depends on the place you want to reduce. You can do this in three places - in the back of the belt, on the sides and legs below.

The first case of "your", if you have a strong deflection in the lower back, then even the most tight jeans at the waist behind a little spank. To get rid of this defect, we take the following steps. We dissolve the back seam, cut the belt along, beforehand, the loops (loops for the belt). Before ripping it is necessary to measure how many extra centimeters you need to remove. These centimeters are divided into two and on each side of the chalk we draw, how many must be removed. The line goes from top to bottom, towards the end smoothly descends on "no". Before you cut off excess fabric, measure how many centimeters are taken to the allowances on the left and right (usually these are different values).

So, the excess fabric is cut off, respectively, by measuring the allowances we combine the details, we smack, we squander, we fold the larger allowance inside, we sew it. We turn it to the front.

Surplus fabrics from the belt are cut, we sew the belt, we sew the loafer back. Done! By the same principle, jeans are sutured from the sides. Only open, of course, side seams, the belt is cut at the sides. We cut off excess fabric, we sew again lateral details and a belt, we return loops to the place.

Also of great complexity is not the question of how to sew jeans in trousers. For example, if you have jeans flared, and you passion as you want narrowed! Of course, if you have rapper jeans, do not tuck them in, no panties "stick out". The rest can be managed.

Before zausit jeans at home, we put them on, we stand in front of the mirror (it is better to stock up the assistant). Portnovsky pins carefully puncture those places that we would like to remove. Do it on the front side. It is enough, however, to pinch only one leg, and the second to measure it, otherwise there is a great risk of obtaining a different width.

After pricking, carefully remove jeans, turn inside out, tailor chalk marks the places of stabbing from the wrong side. We remove pins, draw lines along the lines of the future seam, it should be as flat as possible. Then we combine both legs, we pierce through all the layers of the fabric through the line, draw the cut line on the second leg.

We cut off the extra, we cut the seams, we put it on the typewriter, we process the edges "zigzag" or on the overlock. We turn, we try. In general, it is very useful to try on the product several times in the process.

Now you know how to sew jeans at home. Dare!