How to sew epaulets: basic rules and nuances of work

Despite the fact that all the nuances of sewing shoulder straps to uniform should be familiar to every man who served in the army, many have difficulties with this process. First of all, it is necessary to determine where it is necessary to strengthen them. So, the question of how to sew epaulettes, should arise only in the case when it comes to dresses or outerwear. But they are not sewn to the shirts. They can be attached using a button or an ordinary paper clip in the winding.

Fastening the epaulettes to the shirt

With the approach of warmth, all the members of the armed forces, police and other bodies, where uniforms are provided for, are removed from their tunic. At this time they have to remember how to sew on epaulettes on the shirt. This process is not too complicated and does not take much time, because in fact they are not sewn, but simply fastened with buttons.

On the shoulders of a uniform shirt there must be special loops for attaching insignia and several loops. Before starting work, take the branded (walking along with the shoulder strap) and the usual buttons. So you can make a detachable design that you can unfasten at any time. Take the buttons, branded above the shoulder strap, the usual under it and sew them. When attaching the bottom, make a small foot to facilitate fastening these distinctive signs to the shirt. Now it's enough to pass a dense strip of fabric, located at the bottom of the shoulder strap, into special loops on the shoulders. After that, you can fasten the button in a specially designed eyelet.

Fastening the epaulettes to the outer clothing

The simplest way to deal with the fastening of uniform marks of distinction is precisely to the shirt. But to find out how to sew the epaulettes on the tunic is a little more complicated. During this process you will have to work hard. It is very important to ensure that during sewing this distinctive mark is correctly located on the shoulder and does not move anywhere, for this you can sweep it with a few stitches around the edges and in the center or pin it with a pin.

Having figured out how to sew on shoulder straps, prepare everything you need: matching threads, scissors, thimble. Be prepared for the fact that this process is quite painstaking and complex, dense fabric is not easy to flash. Put the shoulder strap on the tunic so that its lower part is on the seam line, which is sewn onto the sleeve. To make it easier for yourself, push the needle into the seam holes of this distinctive sign - so you do not have to make new holes. Note that the shoulder straps are sewn right through the line that connects the edge and the main part of it.

Sewing police shoulder straps

If you need to learn how to sew police shoulder straps, then note that evenly they are fixed in the bottom of the sleeve of the sleeve, and the rounded edge should approach the collar of the product. The back of the law enforcement uniform must be 1 cm from the shoulder seam. It is located with a slight shift forward. The upper stitches must be very small so as not to catch your eye. In addition, the shoulder strap should be tightly pressed to the tunic and hold tight. To do this, the seam should be made along its entire perimeter.

These are the basic rules regarding how to sew on epaulettes. If you observe them, you will be satisfied with the result of your work.