How to sew a lambrequin with your own hands (with patterns)

Every hostess wants her house to look dignified. And one of the simplest ways to do this is the original decoration of window and door openings in all rooms. And for this you can use not only the usual curtains and tulle, but also lambrequin. With their own hands, with the patterns and instructions given in this article, even a novice needlewoman will be able to produce unique products using fabrics of different textures and colors. It is also worth noting that, in addition to the proposed schemes, each woman can also use her own creativity, so that her house will acquire a unique appearance.

The easiest way to make lambrequins

With the fact that the more complicated the lambrequin, the more elegant it looks, it is impossible to argue. However, if you do not want to spend money on a luxury product, and the skill of the needlewoman still does not allow you to sew a complex lambrequin with your own hands, you can wait for patterns and choose an easier way of making this thing.

For the production of the simplest lambrequin, the fabric will need to cut out a strip of the desired width, the length of which is two and a half times greater than the length of the cornice. After this, bend the workpiece from all sides, and sew the so-called curtain tape to the upper edge and pull the product off the threads that are on it. This method allows you to very quickly produce lambrequins with your own hands. With the patterns of such products, you definitely will not have any difficulties. And when you have mastered this art a little, you can use one of the following schemes to cut out the strip. To obtain a more interesting lambrequin, its lower edge can be trimmed with a fringe or a ribbon of contrasting color.

Lambrequin with "tails": preparation of materials and pattern

This option is no less easy to manufacture and also often attracts the attention of needlewomen who do not yet know how to sew lambrequins with their own hands, but only look for suitable schemes. For this product, you will need a basic fabric, if necessary - a lining and a lining in the form of a non-woven or other sealant, a decorative cord with a length of 1 m, as well as a soft pencil, cornice or strip to which the ready-made lambrequin will be fixed. With your hands with patterns of the product, you do not have to fuss around for a long time, since they are made quite easily and do not require a preliminary manufacturing of a paper template. It should be noted that the length of the cornice should be approximately 30 cm greater than the width of the window opening.

Now we start to cut out the lambrequins. Photos of this product can be done later. And now you need to cut a piece of the main fabric, whose length will exceed the length of the cornice by 20-30 cm, and the width is 74 cm. The same dimensions need to cut the lining and gasket. You can do without them, but it is these materials that make bulbenes more bulky. With their own hands for beginner needlewomen to sew them - the task is quite real. There are dense fabrics, so they do not have to bother with other additional materials for a long time.

The order of making lambrequin with "tails"

Having prepared all of the above, you can proceed to join the parts. If you use all three layers, then spread out the cushioning fabric, on top of it with the face up - the main one, and then the lining, but face down. All layers must be carefully sealed with pins and stitched, leaving one side of 30 cm not stitched. This is done so that you can turn the sewn lambrequin on your face with your own hands. With the patterns work is completed. It remains only to unscrew the product, iron it, gently sew the remaining hole manually - and you can hang it. Do this as follows: the product should be attached to the center of the eaves or the bar at the center point, then fix the remaining fabric, leaving the edges hanging down. Next, the decorative cord should be cut in half and each of them beautifully and gently tie the side of the fabric - this will be the "tails". That's ready elegant lambrequin, despite the fact that it is manufactured quite simply. It is worth noting that this product looks good in the kitchen. If you plan to sew curtains, lambrequins with your own hands, then it's better to pay attention to more complex options.

Lambrequin consisting of one svagi

The most original look of lambrequins with svagi, but they also do much more time for making. However, having shown patience, each needlewoman can receive a unique decorated window. So, in order to make lambrequins with their own hands, with patterns you will have to work hard - they should be made according to the scheme given below. However, you must first prepare everything you need to work. So, you need scissors, a wooden bar with marked centimeters, the length of which will correspond to the length of the future product, paper or cardboard for making patterns and the main fabric. Experienced needlewomen often use lining, but this adds too much trouble to those who first decided to sew lambrequins with their own hands. A master class for the manufacture of this product also presupposes the presence of a sufficient number of pins.

Lambrequin with svagoj: a pattern

If this is your first experience, then it is better to make a template from the paper of the necessary size according to the above scheme. In this case, you can do not a whole detail, but only its half, focusing on the central line of the above figure. Next, the ready-made template should be placed on the main fabric, previously folded diagonally. Of course, the material with this method of cut will need more than if you put the pattern exactly, but in this case, the finished product will look more spectacular. It should be noted that the width of the upper part of the finished pattern should correspond to the length of the cornice, and the height - two and a half times the desired size of the finished product. The fabric blank for the future lambrequin should be attached with a center point to the middle of the work bar. Then gradually it is necessary to fix on it the fabric of the entire upper part.

Forming folds and sewing lambrequin with svarga

Now you can proceed to the formation of folds. The first of them is formed from the extreme point of the right shoulder to the left by lowering the so-called platen 10-15 cm down from the line of the bar. Both end points should be secured with pins. All subsequent rollers are made in the same way until the extreme points are reached. The distance between them must be the same on both sides.

After the shape of the product is ready, it will be necessary to cut off excess fabric at the top of the bar and, placing the workpiece on a horizontal surface, fold all the edges, and fix the top with the seam at the points noted earlier. It is advisable to treat the upper part of the lambrequin with a tape. This is the end of sewing lambrequins. With your hands, you can do everything as you see fit. And if the first time does not work out - do not worry, try to correct mistakes and achieve the desired goal.

Lambrequin with several svagami: cutting and sewing

The rooms with window openings in which are decorated with lambrequins consisting of several svags are more richly looked - you can even have different colors. They should be cut according to the scheme described above, except that the desired width of the future product should be divided into as many parts as you wish to get after the completion of the sewing of lambrequins with your own hands. In this case, it is desirable to take into account that to impart a more interesting look to the finished product, its part should be superimposed one upon another, and this is a few centimeters of the total width. As for the texture of the main fabric, for all svag it is better to take the same, since all sorts of experiments in this regard are often unsuccessful.

Lambrequin with ties: photo

If you need to decorate the window opening in the kitchen, where no curtains or curtains are supposed to be, then this option will be the best solution, especially since it is not difficult to sew a lambrequin with your own hands, the photo of which is presented below, even the beginning needlewoman. For the manufacture of this product you will need a basic fabric, scissors, 2-3 meters of curtain tape and, of course, a sewing machine. At the initial stage, it is necessary to cut out a strip of fabric from the main material, which will be 1 m longer than the cornice - this part of the fabric will be needed for "ties". The workpiece must be welded on all sides, after which you can proceed to the next step.

Sewing lambrequin with "ties"

Leaving 50 cm from the edge of the future lambrequin, it is necessary to vertically place on it the curtain tape and sew it on all along its width. A similar operation should be made with the opposite side. Then the product from both edges must be pulled to the desired state and fasten the threads. After that, the lambrequin can be hung on the cornice. The remaining "ties" should be beautifully built already in a hanging state, if this can not be done, then they can be cut off and attached separately, previously folded accordion and stitching along the top edge.

Lambrequin with puffs: preparatory stage

Another interesting option for making lambrequin is a product with buffers. True, they have one drawback - they can not iron. Therefore, after learning how to sew lambrequins with your own hands, try to pick up for its manufacture such a fabric that would not lose its appearance after washing, namely it was not mint. The simplest way to make this product is to connect the fabric with a needle on horizontal dots. To do this, you need to cut out a strip of fabric that will be two to three times longer than the future finished product, bend it and sew the curtain tape to the top edge.

The process of making lambrequins with buffets

Then on the workpiece every 4-5 cm, you need to apply the points using the erasable marker. It is necessary to make marks on one line, and then, having fallen down the necessary distance downwards, on the following. And so on until the whole fabric is ripped. Then, using a needle and thread, you need to connect two points to each other horizontally, that is, you need to sew together 1 and 2 marks, then 3 and 4, and so on. These actions need to be done with all brands. It is important that the bows are made as reliably as possible, otherwise the appearance of the product can very quickly deteriorate.

Curtains with Lambrequins

In order for all the elements to decorate the window opening well combined, the curtains with lambrequins should be sewn by hand. To do this, you need an opaque cloth from which you need to cut two curtains of the necessary length and width, as well as the required amount of lambrequin. The pattern of the last element can be made according to one of the schemes described above.

As for curtains, their size depends on the area of the window or doorway - they must completely cover it. It is worth noting that it is not necessary to sew all the elements together, since the curtains must be movable, and the lambrequin should remain in place. For a better combination and a more original appearance, making curtains with lambrequins, you can decorate them with braid or fringe of one color with your own hands. Also, all these details can be decorated, for example, with the same bows or other decorative elements, which you can either make yourself, or buy in the hardware store.