How to paint fox fur at home and use it in a new quality

It's a shame to throw a worn out coat? Let's try to find another solution! For many, it's customary to paint and update old furs to reuse them in clothes or accessories. But can you find any other ideas?

In the fashion "Mexican jerboa"?

It is very interesting to experiment with the coloring of fur in different colors, different from natural ones. You can do this with conventional aniline dyes. But how to paint fur at home? There are some secrets in this simple matter:

• Aniline dye of the chosen shade must be dissolved in a container with an appropriate amount of hot water;
• The skin can not be completely lowered into the paint, since it can greatly diminish in size from hot;
• Wet and hold in the dye for several minutes you need exclusively a fur part;
• Rinse in clean water only the fur itself;
• To preserve the color, you can rinse the fur in salted water;
• Dry the skin in a straightened state in an inclined position without access to sunlight and heat at room temperature.

Where to use stored and updated furs

Green and pink, red or brown fur skins gaze and delight the body. How to paint fox fur in rainbow color and use it in an unconventional way, designers know with their irresistible imagination. Car interiors and ottomans for the boudoir, bedroom and bathroom rugs, vases of unknown purpose and wall panels of colorful fur pieces are just a small list of possible application of painted fur.

You can make beautiful jewelry yourself. How to paint fox fur at home and make bracelets or pendants?

• First, the pieces of the flesh are gently stained from the can with automotive or suede paint. Spray the aerosol at a distance of 35-40 cm very "gentle" layer.
• With a razor blade, the skin on the underside is cut into thin strips with a length of 25 to 50 cm.
• Large wooden beads can be worn on fur straps in loose order.

The resulting banners can be wound up on the arm in the form of designer bracelets. If the strip is made longer, you can get original beads or a "collar".

Paint for hair and natural fur

You can find out how to paint fox fur at home using hair dye. In this way, it is preferable to revitalize products that are still to be used. These can be collars or hats, faded places of a fur coat, cuffs of fur sleeves. The following components will be needed:

• Selected hue of hair dye;
• Cosmetic fat cream;
• Water, small hairbrush, a piece of cotton cloth;
• A cup for breeding paint and a brush;
• disposable gloves.

Before the beginning of painting, the reverse side of the fur (the skin itself) is greased with a greasy cosmetic cream to give softness and elasticity. On the moistened pile brush is applied diluted in accordance with the instructions of the paint, distributing to the necessary areas. After soaking for about half an hour, the paint is thoroughly rinsed with running water. Having spread the skin on an inclined surface, it is necessary to "throw out" the remaining water by hand. For final drying, the product is kept on a fabric substrate in an inclined position. Fur regularly comb and change the cotton fabric under it.

Cons of self-coloring of fur products

Knowing how to paint fox fur at home, you can for some time prolong his life. After a few months, the paint may fade or simply change the shade to a lighter one. Black, most likely, will turn to brown, and brown - in beige and so on. In addition, home painting should be done very carefully, because the dyes are toxic.

The implementation of simple safety rules when working with fur painting for the implementation of their design ideas - the work is not very difficult. How to paint fox fur at home? The result can exceed all expectations. If it was Ellochka Schukina, it turned out that talking about our contemporaries!