How to make rings with your hands for hands

There are many options for making homemade jewelry. In this article we will talk about creating a ring with our own hands for hands. So, you will need:

1. Two beads, color as desired.
2. Metal wire, preferably medium elasticity.
3. Tools for work: thin pliers or strong tweezers, pliers, nippers for metal.
4. Grit with high grain or GOI paste for grinding the finished product.

If the farm has a hand drill, you can buy a special grinding head, which will greatly facilitate your work.

What will it take to create an ornament?

To make it easier to create a ring with your own hands for hands, we recommend preparing an adhesive tape, a marker, a marker or a pencil, as well as a shape for rings of the required size. If there is no such form, any object with a diameter slightly smaller than necessary can be used instead. The diameter of the wire must be selected in such a way that it is slightly smaller than the diameter of the hole in the beads.

What is the process of creating an ornament?

1. Let's start creating jewelry with our own hands. First, you need to separate two pieces of wire 3 times longer than the expected diameter of the future ring. Each of the segments must be pushed into the bead, so that the latter is in the middle of the segment. Then take the pliers and cut the segments at right angles. After bending the two wires, put the pieces next to each other. One of the beads needs to be placed slightly below the second, and the length of the wire - so that the circumference of the ring is flat. For more convenient work, the pieces of wire can be fixed with adhesive tape.

2. After this, make a piece of wire around the warp core, as close as possible to the nearest bead. Use a pen or pencil to mark it to the desired length and continue to make turns. The wire must be wound up to the required length, and then cut off the remainders with the help of wire cutters. With the help of pliers, it is enough to fasten the wire firmly to the base.

3. Almost always it is necessary to make a metal form for jewelry. With your hands, you need to wrap the resulting blank around the mold until we have a ring. Then it is necessary to prune the remaining ends of the wire, making something similar to a cascade (of different lengths). With the help of kruglogubtsev do curls.

4. After all these procedures, the resulting product must be sanded from the remaining burrs, and then rubed to a shine paste applied to a soft cloth. How does the finished ring look like, shown in the photo below.

What you need to know to make an elegant ring

Also, it is not superfluous to recall that when creating a ring with your own hands for hands you can use expensive materials. The product will be more presentable. However, first to take on this, it is necessary to fill your hand with something cheaper.

A little in conclusion

This completes the process of creating a ring for hands. If you want to make such a ring, then you should wish you good luck! And remember, everything must be approached with due level of responsibility and accuracy. Otherwise, the created element does not please you with its design.