How to make a wicket from corrugated board

One of the most common building materials in recent years has become profiled. It is used to create temporary structures, to coat buildings, to create a roof, etc. At the same time, there are a large number of varieties of this material, which makes it possible to significantly expand its scope. Excellent and obtained such a structure, as a gate from corrugated board. The price of the final product is much cheaper than using any other material, and reliability, strength and appearance make this material indispensable.

Choice of materials

It is necessary to choose the right material for the manufacture of the wicket. It should be light enough not to burdens the hinges and is strong at the same time. Many instructions that teach how to make a wicket of corrugated board are recommended to use for the skeleton a square tube. However, experts believe that it is best to use a metal corner. The fact is that in addition to its light weight, it has great strength and is very convenient to work with. As a covering it is necessary to use the same type of corrugated board from which the fence is made. Otherwise, any suitable form of this material can be used.

Carcass fabrication

When creating a skeleton, it is necessary to remember the concept of stiffeners. The fact is that the wicket from the corrugated board should not receive its strength only due to the skin. A sheet of metal must be fastened to a solid base, which is mounted with all the rules of geometry. When creating the frame, you must take care of the fastenings for locks, handles and hinges in advance.

Painting

After the frame is ready, it must be painted. This is done despite the fact that the wicket from the corrugated board is a product that is resistant to corrosion. First, it is necessary to apply a primer coat, and after it has dried, you can paint the entire structure.

Profiled sheeting

After the paint has dried, sheets of metal are placed on the frame. Wicket from corrugated board can be made with the help of special screws, with which the profile will be fixed. However, it is best to use special rivets. The installation process will be more time-consuming, but as a result, the product will become very reliable and resistant to penetration. After that, the gate is painted. This process can be avoided if a metal sheet with an already applied pattern is applied or the owner is going to leave the metal in its original form.

Installation

Wicket from the corrugated board is installed on the hinges using special gaskets made of soft metal. In this case, it is necessary to leave a small gap, which will prevent the process of friction of the door at the time of its shrinkage. It manifests itself even in such constructions. For greater ease of maintenance, a small hole is drilled from above the hinge, into which grease must be periodically filled. It is also worthwhile to take care of such a device on the latch to ensure its smooth running.