How to make a sniper rifle from a tree? Sniper rifle made of wood with own hands

Most boys in preschool, school and adolescence play "war toys". That they save the world from extraterrestrial invaders, then free hostages from malicious violators of the law. True, modern children are increasingly becoming players in the practice of a-la "Counter Strike" games. And for greater clarity, they make intergalactic and standard weapons of their favorite computer characters with their own hands. Therefore, in today's article, we'll talk about how to make a sniper rifle from a tree.

General characteristics of a sniper rifle

Before you begin to work and make a kind of mock-up of a real weapon, it is worth considering the details of the rifle. So, what does it consist of? Depending on its version and model, the rifle may contain various details. For example, SVD ( Dragunov's rifle ) consists of the following components:

• Sniper optical sight;
• Store;
• A trunk with an open butt and a sight, and also with a receiver;
• Covers of the receiver;
• Mechanism with a return principle of action;
• Frame for the shutter and the shutter itself;
• Trigger and impact mechanism;
• Overlays on the barrel;
• Pusher and tubes with regulators and retainers;
• Fuse and butt cheeks.

Next, we will explain to you how to make a sniper rifle from the tree on your own. Let's say at once: there are a lot of options that allow to make a model of weapons from wood. However, we decided to take as the basis the simplest, which even a child can cope with.

Preparation of workplace and materials

If you decide to make a weapon layout yourself, you must prepare the workplace, tools and materials in advance. At the same time, if you are under 12 years old, it is better to put all the main types of woodwork on the shoulders of a father or grandfather.

For work, we need a rectangular piece of wood, the size of which depends on what dimensions, in your opinion, should be the model you made. For example, the size of the rifle in the finished version is 1220 mm in length, in height (taking into account the sniper's sight) - 230 mm, in width - 88 mm.

As a material for the layout, you can use not a tree, but a large piece of broken furniture. This can be, for example, the door from the wardrobe, the lower part of the old entrance door, etc. In a word, a sniper rifle made of wood with its own hands is made of any wood or furniture that is at hand. You will also need a metal tube.

Next, prepare tools for woodcarving, a grinding machine or a plane, a milling machine, a plane, a saw, glue, nails, a hammer, a vice, a drill, chalk and varnish. As a workplace you can choose a garage or a labor office.

Drawing and model layout

When all the details and workstation are ready, you can begin to solve the problem: "How to make a rifle yourself." To do this, take a prepared wooden fragment and draw on it the outlines of the future rifle. It is more expedient to make it an ordinary white chalk, but if there is not one, a marker and even a pen will do. Do not forget to draw a sniper scope. And you should not draw in a three-dimensional, but flat variation, that is, if your model is on one side.

We cut out model of a model from a tree

At the next stage, take the saw and gently, observing the safety rules, cut out your rifle along the outlined contour. At the same time, try to observe the drawing of the marking and not to go beyond its edges. Ideally, a rifle made of wood, created by your own hands, should be smooth and close to the original.

We work roughness of the plane

In order for your layout to save you from such an unpleasant phenomenon as splinters, it is recommended to treat the product with a plane. This should also be done with a view to making the weapon received softer and more rounded.

Hard-to-reach places are better to be processed with a grinding machine or a metal file. Rounding and polishing rough sections of the rifle can be done with a "skin" or sandpaper. After this treatment, you should get a smooth to the touch of the model and, as a result, a beautiful sniper rifle with your own hands.

Make a handle to load the shutter of the hard drive

Such a shutter made of a metal pipe is made (copper is ideal) using a conventional hammer and vice. Then, from the bottom of the rifle, it is necessary to drill a small hole, into which the handle will then enter. The very same handle, made of pipes, it is necessary to grind the polishing machine. After that, the handle is attached to the underside of the rifle with the help of nails and self-tapping screws.

We make metal plates for the hard drive

At the next stage, decide how to make a sniper rifle from a tree: with or without plates on the hard drive. In this case, the metal plates will give a realistic model, so they are better done. To do this, take two small flat rectangles of thin metal cloth, make holes for nails in them with a drill and fasten fasteners on both sides of the rifle.

We make the barrel for the rifle

To make a barrel for a rifle, use an aluminum tube of a small thickness. Next, you have to cut off the excess metal with a hacksaw and leave the length that you need. After this, do in the resulting trunk three identical holes, two of which will serve as a support for fastening, and the third for the fly.

If you still have not decided to make a model of weapons and do not know how to make a sniper rifle from a tree, rather join us. It will be more interesting later.

At the next stage, we attach the finished barrel to the rifle model and fix it securely. At the final stage, it is recommended to cover the weapon model with protective wood varnish. The rifle is ready.

How to simplify the work with the tree?

If you just think about how to make a rifle yourself, and our step-by-step instruction seems complicated to you, you can always simplify it. How to do it? For example, you can take a wooden element, draw a contour on it, cut it out, sand it and varnish it, without using additional metal elements. So you, on the one hand. Simplify your work, and on the other - make a long-awaited layout with the minimum time spent.

As for the remaining elements of the rifle, they can always be finished. By the way, on the same principle, you can make other types of weapons.

What safety rules do you need to observe when working?

Before you make a sniper rifle, do not be lazy to learn basic safety rules. So, for example, it's best to start working on wood in a special apron (it should cover the upper part of your body up to the knees) and gloves. These can be ordinary gloves that we often buy, when we make repairs or something to be painted.

Hair is best hidden under a cap or bandana so that they do not interfere. This will protect you from getting hair in the blades of the milling machine and other equipment. For the same reason, before work, it is better to take off long chains and other costume jewelry, neckerchiefs and scarves. It is also better not to use clothing that contains decorative elements, for example, ruffles or fringe, during work.

Before making a rifle made of wood, take care of purchasing special protective goggles. They will need you at a time when you will grind and comb the wooden models. And they will help to protect your eyes from getting into them small parts of the tree, rubbing and chips.

Working with the electric drill, check the serviceability and working condition of all tees and sockets.

What other materials can make a sniper rifle?

In addition to wood, a sniper rifle can be made from plain paper. This can be an origami-style rifle made from several sheets of paper in the style of a 3D model. If desired, such a model of weapons is worth making of plastic bottles, ice, foil, empty boxes of milk, etc.