How to make a bulk floor in the bathroom: step by step instruction

Bathroom - this room is special. It is here that most people relax and take water procedures. And it is not surprising that the design of the bathroom is always more serious. Today you can use modern technology, with the help of which you create really cozy rooms. You can make the floor in the bathroom and not only get a practical and wear-resistant floor covering, but also enjoy a unique design.

Self-leveling floors: what is it?

Self-leveling floors are a liquid, or rather a special mixture, which is poured onto the base of the base. When the mixture dries, you get a pleasant to the touch surface, which is compared with a smooth floor tile.

Mixtures that are used to create self-leveling floors have the property of self-leveling. This greatly facilitates the task for those who have not yet had experience in installing such floors. Making the floor in the bathroom by hand is not at all difficult. For success, it is necessary to strictly follow the technology of applying the mixture and pre-carefully prepare the base.

Advantages of self-leveling floors

These floor coverings have many advantages. The first thing that can be said about them is the very high performance characteristics that distinguish the bulk floor. In the bathroom, this is especially true: in this room is constantly increased level of humidity.

In addition to excellent moisture resistance, this modern floor covering is characterized by high ecological compatibility, high level of strength, resistance to various mechanical damages or deformations. Also among the advantages are antistatic properties, excellent heat conductivity characteristics, high resistance to chemical attack. Also, these floors provide very wide opportunities for creating design effects. See how the floor can look in the bathroom. The photo can not convey the depth of the picture - in reality it looks fantastic.

We make a bulk coating in the bathroom

According to their characteristics, pourable coatings are an ideal choice for bathrooms where there is constantly increased humidity level and various washing and cleaning agents are used. Also in these rooms should always be the most comfortable temperature. You can create all this with the help of unique self-leveling floors.

We prepare the basis for work

Before proceeding with installation, it is necessary to carefully prepare the rough floor. So, the preparatory work process includes three stages. At the first stage, the concrete base is thoroughly cleaned from various dirt and dust. Further, the floor is inspected for various defects. If something could be found, then a crack or cleavage must be removed.

The next stage of work is applying a primer coating in two layers. Pick up a primer on the basis of what is the basis in the bathroom. For weaker floors, mixtures with a higher penetrating power are used.

We select materials

In order to pour the filler floor in the bathroom with your own hands, you should purchase a polymer mixture, as well as a finishing coat. Also, if you plan to do not just floors, but something designer, then you also get design elements.

Today in building supermarkets you can easily and inexpensively find different colored polymer compounds for the bulk floor, which will help decorate any bathroom interior. Designers today also create a unique bulk filler floor for the bathroom. The photo can be seen in the article.

When selecting materials for floor installation, it is very important to purchase mixtures only from reliable manufacturers. Only so you can buy a real, high-quality product and get a reliable floor as a result. In addition to the correct choice, then it is necessary to study the instruction and prepare the bulk mixture as indicated by the manufacturer. Only in this way can you get a solution of the necessary density, with which it will be very easy to work.

Mixtures for bulk floor

To arrange the floor in the bathroom apply several products. These are solutions based on polymers and cement, crushed stone or sand. These compounds are most suitable for the creation of a quality base base.

In addition to the base, finishing mixtures are used. Here, only the polymer is based. For bathrooms, polyurethane or epoxy finish coatings are best. Floors based on these solutions will have maximum wear resistance and excellent decorative characteristics. Take a look at how effectively the floor in the bathroom looks. The photo below is made after a year of using the floor. As you can see, there are not a single scratch on it.

Required Tools

To install bulk floors, the home technician only needs a spatula and a special roller with needles. The spatula will help to evenly spread the mixture over the entire surface of the base, and the roller - to remove air bubbles from the solution.

Filling technology

First of all, prepare the solution. In a pre-prepared container, all components are covered and using a mixer or a drill with a stirring nozzle is thoroughly kneaded. As a result, a homogeneous solution should be obtained. Then, the resulting thick liquid is poured onto the roughing floor and the layer is leveled so that the thickness over the entire area of the room is approximately the same.

It is important to know that floor installation work must be carried out within the strict temperature range. Work is allowed at a temperature of +5 to +20 degrees. Also there are requirements and to the level of humidity - not more than 60% is allowed. If these important conditions are violated, nothing terrible will happen, but the coating will be much longer freeze.

If everything is done correctly, the thickness of the layer is the same, then you can finish the work on this. To fully dry the coating will take at least 12 hours. However, this is only the base surface. There is still a finish covering. Filling technology is the same.

The floor in the bathroom can be made by everyone. This is a simple floor, for which only a flat concrete screed is needed.

It is important that at the time of the drying of the coatings, the inflow of fresh air is limited. If you do not, then in time the floor just cracked.

On the disadvantages of filling

The first thing that these polymeric floors scold for is the high prices for the mixture. The price is really much higher than that of tiles or traditional linoleum. Another disadvantage is the rapid drying out. If a mistake was made during the filling, there is very little time to eliminate it.

That's all the disadvantages. For those who decided to make a bulk floor in the bathroom, feedback about the operation of modern technology is positive. All those who use these floors, confirm the high durability and durability.

We decorate the flooring

These floors have very wide possibilities for decoration. Some covers are almost works of art. If the home master has a sense of beauty, then he will be able to give the bathroom a special look. There are several ways to decorate a floor covering.

The first method involves overlaying a base layer of an image on a special film. It is necessary to very carefully stick the self-adhesive film on the substrate, and then apply the finish part.

A more advanced owner of a house or apartment uses the services of professional artists who create not just images, but voluminous pictures.

You can make a durable and beautiful coating, but it will be monophonic. This filler floor in the bathroom also looks very, very impressive. To do this, a dye is added to the polymer mixture.

So, pouring liquid floors is a simple operation. The result is just perfect, and the wide possibilities for decorating and decorating make liquid coatings an excellent option not only in the bathrooms, but also in other rooms.