How to level the walls in an apartment with your own hands

The most unsurpassed design of an apartment can be ruined if there are any roughness on the walls, attracting the attention of all households and guests. In this case, the host gets a lot of questions. One of which: " How to level the walls in the apartment?" To do this, you need to select some method from a number of available.

How to level the walls in an apartment: choose the way

Here you can offer two options: use dry construction mixtures or use drywall. From the chosen method, the further method of finishing smooth smooth surfaces will depend. If your choice will stop on plasterboard, then such a coating can be puttyed, painted or wallpapered with wallpaper. Such a surface is unsuitable for gluing the tile, as the drywall has a too smooth and even surface, which is not at all suitable for such purposes.

Speaking about how to level the walls in the apartment, it should be noted that most people prefer dry mixtures. It is appropriate to use gypsum or cement-sand plasters. On such a coating tile is glued much easier, since it has better adhesivity. For wallpapering or painting, such walls are also excellent.

If you talk about how to level the walls in the apartment, you should consider the stages of work that depend on the chosen method. First, preparation is carried out. To do this, the surface should be cleaned of old wallpaper, tiles, unreliable plaster, as well as peeling paint with a spatula, chisel and hammer. All work is important to carry out as accurately as possible, since under the layer of plaster the harness, hidden not deep enough, may be hidden. It is necessary to de-energize the apartment for a while, to protect yourself. Before leveling the walls, it is necessary to make all work with electrical wiring and lighting.

Aligning walls for wallpaper with dry mixes

After cleaning, it is necessary to treat the surface with a special primer, which will increase the adhesion. The alignment should be carried out correctly by installing special beacons in the form of flexible aluminum elements fixed to the surface to be processed, which allows you to set the level of all measurements. Next, you can apply a leveling mixture on the walls, consisting of gypsum or rotant. Stucco mixture must be prepared in full accordance with the instructions. The application of plaster must be as accurate and consistent as possible. Putty is produced only after all the plaster has dried. After the finishing coat has dried, it is necessary to grind it using sandpaper.

Aligning the walls with gypsum boards with their own hands is not very difficult. As a beacon in this case will serve as an aluminum profile, attached to the wall. To it fasten sheets gipsokartona. Before fixing the sheets, it is necessary to fill the voids with heat-insulating materials.

You see that in solving the issue of "how to level the walls in the apartment," there is no particular difficulty, it is important to determine what kind they will have in the finale.