Homeliness, Building
How to lay laminate properly: repair techniques
If you decide to make repairs, then it may be reasonable to ask how to properly lay the laminate floor in order to avoid the problems associated with the floor in the future. After the laminate has been purchased, it is necessary to carefully inspect the surface intended for its laying.
It is advisable to check it with the help of a building level. On a surface that does not exceed two meters, you can tolerate changes of about 2-3 millimeters, if the unevenness is greater, it should be leveled. So, how to lay the laminate yourself in this case? If at you boards from time to time at a load change the position, they should be interconnected among themselves. After this, it is necessary to lay polyethylene for waterproofing.
In order to prevent the laminate from "moving" the film, the spot is fixed using scotch tape.
If the windows are located on one side, how to lay the laminate?
Arrange it in the direction of direct rays of the sun.
It should be noted that if the laying is done differently, some shadow will be visible on the joints, which will affect the appearance of the floor covering.
Many apartment owners are interested in how much it costs to lay a laminate on a wooden covering, which can assume both glue and glueless locking.
Locking method is the most common.
Laying the laminate on a wooden base system "Click
Now you can consider how to properly lay the laminate on an adhesive basis. There are advantages here. First of all, this is the isolation of joints from excessive exposure to moisture, which is distinguished by increased reliability. In simple terms, the glue can automatically extend the service life of such a floor covering. Nevertheless, as elsewhere, there are certain shortcomings. For example, it is possible to note considerable expenses of money resources on glue, and also the raised requirements to quality of such floor covering and some difficulties of the given technology. After laying the laminate on the adhesive backing, before using the floor covering, wait at least ten hours. At the same time, one should not lose sight of the fact that after this procedure, when the glue was used, the laminate can not be dismantled and reapplied. If everything is done correctly, the laminated coating will add the necessary comfort and comfort to the room. Such a covering for the floor will serve faith and truth for more than one year.
Similar articles
Trending Now