How to connect the printer to the laptop in a few minutes

Over the past few years, much has changed in the field of computer technology: what used to be something unusual, is now considered quite ordinary and familiar. As an example, we can recall the story of the popularization of manipulators such as the "computer mouse". Quite possibly, someone else remembers the times when the DOS system flourished when the mice were, if they were, fully supported only by a very small number of programs. However, the Windows operating system appeared: first 3.1 (we do not specify previous versions because of their low popularity), then 3.11 and finally the famous Win 95. Since that time such an exotic device as a mouse has become, in fact, an integral part of any computer . Although without it it was quite possible to manage. As you know, history develops in a spiral: now it is difficult to imagine a full-fledged electronic assistant without a printer. Not surprisingly, the Internet is full of questions like "how to connect a printer to a laptop". You can buy the device yourself, but with the setup there can be certain difficulties. For example, one of the most popular questions on the forums is "how to connect the printer to the laptop". This point is quite natural, especially considering the popularity of portable computers.

Before we describe the procedure, we immediately warn the reader that it is not easy to understand the question of "how to connect a printer to a laptop" ... and it is elementary. Are you ready to become a bit of a guru? Then, read on!

In fact, how to connect the printer to the laptop, you need to ask any owner of the computer equipped with a printer. There are no differences. All actions are identical.

The vast majority of modern models of printers are connected to the computer via a USB interface cable. All connectors and plugs are standardized. So, after unpacking the printer, you need to read the instructions to it, since, perhaps, preparatory actions are required. Then we insert the CD-ROM that comes with the printer into the CD-ROM drive and start installing the driver: if the "Autostart" function is activated, everything starts automatically, otherwise you need to open the disk structure and start setup manually. During installation, the program will ask you to turn on the printer. To do this, turn on the USB cable from the device to any available USB port on the computer; Insert sheets of paper and supply power (plug into the socket and the power button).

If all goes well, the driver will report a successful installation.

By the way, this way of connecting a laser printer to a computer is also suitable for inkjet models. That is, to make everything work, you need a physical interface connection, driver installation and power supply.

It's a little harder to figure out how to connect the printer to wi fi. If the printer model contains a wireless communication module, you need to configure the laptop and printer for point-to-point operation. For models with an Ethernet interface, you need to purchase an access point and connect the device to it. In the laptop will remain to install a network printer (work on the IP address). And, of course, one of the simplest (but not so cheap) solutions is to "rassharit" the printer from another computer that has a Wi-Fi unit.