Hare crochet: scheme, description of work

Toy hares are cute and delicate souvenirs, which sometimes do not take their eyes off. These animals are very fond of children, because they embody kindness and affection. The hare crocheted quickly and easily: it is possible to perform the work even for beginner needlewomen.

Required materials and tools

The main objects of labor when knitting are, of course, yarn and hook. Consumption of materials directly depends on the size of the finished product. Before you start, make sure that you have the following items at hand:

• Hook of a suitable number;
• Yarn of several colors, preferably from acrylic;
• Limiter loops;
• Pins are English ;
• Needle with a wide eyelet for stitching parts;
• Filler (sintepon or holofayber).

The cost of tools and materials is small, which makes it possible to carry out the toy yourself, no matter what means the needlewoman has.

What do you need to be able to do?

To perform the job, it is desirable to be able to knit basic elements that are already well received. You can hone your skills on thicker yarn. Knitted toys usually consist of:

• Air loops, which are used for the beginning and continuity of knitting;
• Columns without crochet (sb);
• Connecting bars with and without crocheting;
• Columns with one crochet (cn);
• Additions (2 sbn per one base);
• Reduction (2 sbn to tie together).

Most often, they begin to work with a ring of amigurumi, whose technique is easy to master.

The initial loop and the transition to circular knitting

After choosing the yarn and the corresponding hook, we'll start knitting the torso. So, our product is a hare. Hook will need to grasp the thread in such a way that it passes through the inner surface of the ring. To do this, create a derivative circle on the palm of the tip of the thread and draw a loop through it, making one thread.

Now the ring is more or less fixed. It remains to bind 6 bars of bars and close the circle.

How to tie a rabbit crochet: torso

After closing the first row of bars in the ring, tie one air lifting loop and loosen two loops at the base of each column of the previous row. Continue to make increments in the following circles, skipping 1, 2, 3, etc., until the number of loops reaches 36. Then run 2 rows unchanged. The trunk ends with successive decreases over 10 rows. In the end there should remain 6 bars of bar. In the course of knitting, do not forget to fill the part evenly with filler.

So the hare got a crochet hook, the design of which is usually always constructed in this way. To increase the size of the proposed toy, perform more increases.

Executing the head bunny

Each new part will begin and end about the same way as other parts of the body. To form the head, perform an amigurumi ring from 6 bars of bar. Run two sb in one loop, observing the rules for making increments: in the first row in each column, in the second row in one, in the third in two, etc. The number of sb in the last circle is 42, now you can start decreasing to the original 6 Columns of b. In the process of knitting into the head gradually add filler. At the end of the work, leave the thread of sufficient length for further stitching.

They broke their brains, how to tie a rabbit? Everything was much easier than imagined. The main elements are connected, it remains to perform the paws and ears of the future toy.

Crochet hooks: description of the legs

The pens will consist of 19 circular rows, which again start from 6 bars bn in the amigurumi ring. Additions are performed in 2 rows, the number of loops should reach 15. To knit one circle unchanged and gradually to decrease: in row 5, knit 12 bollards, from 6 to 18 - 10 bollards, finish on 5 loops. In the process of work, fill the part with a sintepon or a holofiber.

To perform the hind legs, you must dial a string of 7 air loops, then follow the following pattern:

• In the second from the hook loop to fasten 4 columns of bn and 3 docks of bn in the third loop;
• Turn the work;
• 4 column bb, 2 bar bn - it turned out 14 sb.

The second circle begins with an increase, then we tie it: 4 bars bn, 3 additions, 4 bb bins, 2 additions. The number of elements will reach 20 and will remain unchanged several laps. In the third row, the sbn and connecting columns are made, alternating them in this order: 4 connecting sts, 10 bb sts, 6 connecting st.

If it is planned that a toy-rabbit, crocheted , should be able to stand, follow such recommendation: tie the fourth circle with the bars of bn, capturing not the whole loop, but only its back wall. Do the same for the fifth row, and after it, insert the cardboard base into the inner bottom of the leg.

The sixth series consists of 3 seasons, 3 successive decreases and 8 columns of the bar. In the next round, tie another 6 bars together, the elements will remain 11. In the 8-9 row, the number of loops does not change. For maximum stability, tightly fill the presser foot. Bind 3 more rows, applying a uniform decrease and close the loops.

Execution of ears and tail

Well, what hare will cost without charming and long ears? The choice of the scheme of this element depends on what desired length the needlewoman wants to receive as a result. Ears in the article considered in the article will be of medium size. If necessary, increase the number of initial loops.

The work will consist of only two series:

1. A chain of 10 air loops, the second from the hook loop knits the column bn, the next - 4 bars bn, 3 connecting columns and 6 columns with one over.
2. Turn the work and carry out: 3 connecting posts сн, 5 bars бн, 1 connecting column бн. The first series is completed, in total there are 23 elements in the work.
3. Finish the work by tying: 5 connecting sb, 13 pillars bn and 5 connecting sb. Similarly, the second eyelet is made.

Many knitted animal toys consist of the same elements. For example, the tail is an integral part of most animals. As for the hare, here the needlewoman has a choice: to tie a small ball or to execute a tail in the form of a fluffy little pompon.

To decouple the details, form a ring of amigurumi from 6 bars of the bar, in the next row make additions to 12 bars of bar. Leave a pair of circles unchanged and finish knitting down to 6 cb. Do not forget to add a filler.

To make a pompom, take the threads of the main color and wrap them on a fork or cardboard, gently peel off and bandage across. The lateral bases can be cut and formed a beautiful ball.

Recent Steps

To assess the proportionality of the elements made, connect the parts of the toy with each other using pins. If the result pleases the eye, proceed to a more reliable attachment - stitching. All the details, except the ears, are fixed on the trunk with the ends of the left threads. To achieve the best results, use the tips of the masters:

• The ears are sewn into one point of the head;
• The front and back legs are attached in pairs according to the hinge principle.

After stitching the details, it remains to perform the embroidery of the face: emphasize the eyebrows, mouth. You can also make dividing strokes on the legs. As eyes, you can use small black beads or round buttons.

It would seem that the work is finished. And it can be really so. But if the flight of fantasy did not stop there - I want to see something more refined and beautiful in a designer toy, - think over the elements of clothing. As a result, we get an interesting and original hare Tilda. A hook is easy to tie a small sarafan and shoes for a little animal. Use any yarn, use the remnants of different colors. In order not to be mistaken with the size, tie the control sheet.

The rabbit crochet crocheted for one or two evenings, and it will be a long time to please the eye. Collect all your creative thoughts, stock up yarn, crochet, patience and good mood to make a real mini-masterpiece!