Game Arma 3: optimization, tuning, guide and recommendations

The ARMA series is one of the most popular among first-person shooters. She stands out from the rest of the fact that she has incredibly strong and single-player, and multi-user modes, which is not practically any other shooter. More recently, another game was released, which was called ARMA 3. Optimizing this project on your computer is the main goal of this article.

The fact is that this shooter has quite high requirements, so you will have to try your best to run it on your computer so that it demonstrates its maximum capabilities. Naturally, this is especially true for multi-user mode, where performance is much more important than the beauty of what is happening around. Graphic delights of the project you can enjoy in a single mode, and now you will need to do everything to make it work as efficiently as possible this game called ARMA 3. Optimization takes several steps and begins with a fairly radical stage. Not every person decides to pass the first stage, so you can skip it, but in this case, the maximum performance of the game is not guaranteed. So, it's time to customize the project so that the gameplay is as smooth and comfortable as possible.

Preparation

In the case of the ARMA 3 game, the optimization will be quite long, so you need to prepare in advance. In fact, for the subsequent stages you will not need almost any special software - only this guide will be enough. But the first stage will require you to format the hard drive and reinstall the operating system. Yes, this is a very serious and global step, but if you continue to read, you will find out why you should definitely do it. In the meantime, attention should be paid to the preparatory process. This means that you need to save all your tabs in browsers, passwords, move the necessary files and documents to a more reliable place from the desktop, and also store up the installation disk or flash drive, that is, the carrier from which you can install the operating system you need.

It should be noted that this game is best interacted with the latest version of Windows OS - with "ten". However, if you do not want to switch to this operating system, you can set the "seven" or "eight". You will also need all the drivers - for the audio card, for the video card, and for other devices that require additional software to run. When all this is in your hands, you can start the first stage of improving the performance of the game ARMA 3. Optimization, as you have already understood, will begin with a full reinstallation of the operating system.

Formatting the disk and reinstalling the OS

Given this first step, ARMA 3 optimization can take a very long time, so you should start the process when you know that you can do without your computer for several hours, and also give him about the same amount of time attention. So, to format the disk is quite simple - you just need to go to the BIOS when you start the computer and select the necessary menu item there, then the formatting process starts, during which absolutely all the data contained on this disk will be deleted. It's no secret that launching programs, in particular games on pure hardware, always happens much more smoothly, software productivity can increase several times, which is why such a big and impressive first step is being made. By the way, you can do everything through the OS installer, which is written on the installation disc or any other medium. Run it and step by step follow the instructions, among which the first point will be the formatting of the disk. Then you will need to install a new operating system - the process is basically automatic, but sometimes the program will ask you some questions and require certain data to configure the new system as precisely as possible. And after several agonizing hours that will drag on like an eternity, your computer will find its pristine purity, after which the optimization of ARMA 3 will begin.

Software Installation

Yes, you have a pristine pure hard drive that will demonstrate much higher performance when something appears on it. What can be the setting and optimization for ARMA 3 if there is no game on the computer? That's why, in parallel with the drivers and software, you need to install the Steam gaming platform , and already from it to install the game itself. It can also take quite some time, but it all depends on the speed of your Internet connection, as in "Steam" is downloading the game from the server in real time. If the connection is not the fastest, the installation can take an hour or more, but you better not spend this time exclusively waiting for the moment when the installation of the ARMA 3 game is finished. Optimization for weak PCs, as well as for strong PCs that Want to squeeze out of the game a maximum, begins right now.

Paging file

So, as long as you have drivers installed for the computer and the game client is downloaded, you can perform several actions that will ensure you the maximum performance of your computer, regardless of which program or game will be launched on it. These settings are ideal for the project in question, so you can follow the instructions without loading your head with unnecessary information. So, the ARMA 3 optimization guide does not start with the game setup, but with the setup of your newly installed system. The first step is to increase the swap file. To get to the swap file, you need to go to the properties of your computer, go there in the advanced parameters of the system, be in the speed section, where you also go to the options subkey and find an additional point there. Once in the paging file window, you will be given a choice to determine its size, depending on the size of your hard drive. The paging file is a kind of reserve - it uses a certain amount of space as a reserve for an emergency, just the one that happens when you turn on a particularly demanding game. If you set a small paging size and clog all your computer space with data, then if necessary, the computer will not have a reserve, and you will not be able to achieve maximum performance. Therefore, you'd better put the maximum size of the paging file for your hard disk, this will reduce the amount of space available for use, but it will give you a large reserve, which can have a positive effect on performance.

What else can you do to optimize ARMA 3? Multiplayer in this game is designed for a large number of people, so you better not be limited to one step.

Aero Graphics

Everyone knows that at some point a rather crooked looking Windows operating system received an addition called Windows Aero, which allowed the user to choose whether he wants the same curve, but a productive system, or whether he wants to add some beauty, which, naturally, will be Eat resources, lowering productivity. In the ARMA 3 project, the optimization of FPS and other indicators is performed directly in the game itself, but very much can be done even before the game is installed. For example, you can again go on a tour of the system parameters and on the speed tab you will find the settings of the above Aero. Here there are two quick solutions, allowing to provide the best view or to increase the productivity to the maximum. Below you can find the full list of effects that are used in the operating system, disable them all for best performance. Of course, this is not the only thing that implies the tuning of ARMA 3. AMD-optimization, for example, will be considered a little later, like the optimization for Nvidia.

Using cores

It does not matter if you are optimizing ARMA 3 for Xeon X5460 or for a different processor (perhaps much weaker), you need to specify the number of cores used. The fact is that the processor can use one core, and maybe as many as six, while each of the six can have a lower frequency than a single core, but in sum they will give much higher power. The problem is that the system does not always use all the kernels by default, so you need to manually tell it how many cores to use. To do this, you will need to tweak the msconfig config file, which you can call using the console. If your processor has four cores, check the "number of processors" box, this will make it possible to change the number of cores manually. Enter the desired number and save the changes.

Launch parameters

Well, all the settings of the operating system are made, and by this time, if you're lucky, your game along with all the necessary programs and drivers has been installed. This means that you can run it and play it - the difference between what was before the whole optimization process, and what you have at that moment, you'll notice right away. But do not think that this all ends. No, you still have a few important things to do that will allow you to further improve FPS and overall game performance. And the first of these actions is the installation of specific start parameters in the "Steam" for your game. Go to the "Steam" and search for the ARMA in the game library. 3. Select the option for setting the startup parameters, after which you will need to enter a line containing the necessary parameters: -maxMem = 2047 -noBenchmark -noLogs -noSplash -world = empty. Of course, each item can be parsed separately, but there is no point in this - knowledgeable people have already created the perfect config for you, so you just have to use it. When you enter the required startup parameters, the time of the first test will come.

First start of the game

Well, run the game and wait for it to fully boot. However, do not rush - you do not need to play. The fact is that at the time you install the shooter on your computer you get only a game client, which is universal. But when you start the game, a configuration file is created in the system that will contain absolutely all the data concerning your interaction with the game itself, that is, all your characters, all your settings and so on. It is for this, and not for the game itself, that you need the first launch - turn off the game and look for the config file, you have to make a couple more changes.

Changing the config

You will find the configuration in the user folder, selecting the user name that was used to log in when you started the game. There you can easily find the folder with the name of the game, and inside it will immediately be a configuration file. Open it as a text document and look for two lines - GPU_MaxFramesAhead and GPU_DetectedFramesAhead. As in the previous case, you can spend a lot of time explaining what each of these points does and how it will affect the performance of the game, but there is no point in this, since you only need to assign the first item a value of "1" And the second - the value of "0".

Graphic settings

Depending on what kind of video card you have, you need to download specific software specifically for your device. Then adjust the map so that it does not work on an ideal display of graphics, but on performance.

Settings in the game

As for the settings in the game itself, here you need to try everything yourself. Set everything to a minimum, and then gradually increase various parameters, checking the performance in multi-user mode. One tip is always to set the landscape display to a minimum.