Frame garage - prefabricated and inexpensive "housing" for a car

Frame construction technology is gaining popularity every year. This trend is related to two main advantages - a relatively low price for material and work, as well as the speed of erection of structures. Car enthusiasts also chose this method of construction, so that began to appear frame garages.

When erecting structures using this technology, employees do not need any special knowledge or skills. The supporting structure is assembled from metal galvanized profiles using screws and screws. From tools, workers will need only a drill or a screwdriver.

Foundation

The frame garage, like any structure, needs, above all, a solid foundation. This can be a foundation, concrete cover or asphalt. But it should be borne in mind that frame structures are much lighter than other structures, so the requirements for the foundation for them are much lower. What also affects the reduction of the final price.

Basic structure

The supporting structure is assembled from metal galvanized profiles, which are joined together by screws and bolts. It is at this stage that the rigidity and strength of the future garage are set. By themselves, the individual elements of the frame are light, so the work does not require large physical loads from the builders, and the system of joining parts with bolts and screws speeds up the work execution. And, depending on the qualifications of the workers, the installation of the bearing structure takes an average of about two days.

Roof and external walls

After the main structure is assembled, it is already possible to discern the future frame garage. And this means that it's time to start mounting the outer walls and roof. For finishing the roof is often used corrugated board or metal. This material is easy to fix with self-tapping screws to the guides. For decoration of external walls, a corrugated board or other material suitable for external use is used. Since the outside of the corrugated board does not look very nice, usually it is covered with facade finishing building materials. For example, siding or block house.

Warming and interior finishing

The next step is the insulation and interior decoration of the structure. Since the garage is a skeleton, its insulation is quite simple. In the profile from which the supporting structure is mounted, there are grooves in which the insulation is laid. It is also necessary to provide waterproofing insulation and interior. For the walls, you can use any material at your discretion. This can be profiled sheeting, OSB plates, glass sheets, plywood, etc.

Gates, doors, windows

At the last stage we upgrade and protect the frame garage - we put the gates, doors and windows (if they are needed). In this issue, each owner is guided only by his own views and preferences. Moreover, the supporting structure from the installation of these elements will not suffer and will not lose its strength characteristics. And the appearance, which due to them will acquire a frame garage, will only become more interesting.