Engineer ACS TP: job duties of an engineer of an automated process control system

What does the engineer of the automated process control system do? This will be discussed in this article.

About profession

How can you briefly describe the profession in question? An ACS TP engineer is a person who deals with various management and control processes , namely, their automation. Also, this specialist designs control devices and develops control algorithms. The engineer is obliged to perform a complete and complete set of works on the setup, commissioning, maintenance of the process control system.

The main part of the specialist's job is to configure and configure the existing software for the software and technical structure for a specific automation object. The employee must carry out special works on setting up the start-up of the process control systems, is obliged to develop special schematic solutions for automation cabinets (and this includes the selection of equipment). More detailed description of the entire work process of the representative of the profession in question will help only consideration of the basic duties of the employee, as well as a list of things that a competent specialist should know.

What does an ACS engineer need to know?

The representative of the profession in question must possess a huge amount of knowledge and skills. Among other things, a specialist in the field of automated TP management system must also have certain qualities and character traits. This includes, for example, stress resistance, mindfulness, patience, good memory and much more.

However, it is worth returning to the knowledge of the process control engineer. So, the job description of this specialist prescribes the following:

• The employee should know the MIS, namely its content, functions and tasks, the order and methods of project development, etc .;
• The basis of economic and mathematical methods;
• Economic fundamentals;
• Labor legislation;
• The basis of cybernetics;
• All standards of documentation;
• Basic labor protection and safety

...and much more. Thus, an ACS TP engineer must have a sufficiently wide scope of knowledge necessary for conducting work.

Responsibilities and functions of the process control engineer

The representative of the profession in question has a fairly wide range of job functions. Below, only the most basic duties of the process control engineer will be singled out.

• The employee is obliged to perform work related to the design and implementation of automated control systems based on the application of mathematical and economic methods.
• The specialist is obliged to study and analyze all possible methods of managing the activities of the enterprise.
• The employee must prepare all the data necessary for the work, as well as prepare technical specifications for the design of the automated control system.
• The employee is obliged to develop the technological schemes of automated control systems.
• The specialist should conduct supervision, as well as assist in the development of systems and schemes.

Of course, the ACS TP engineer has many other duties and functions. A complete list of them can be found in the job description of the employee.

Rights Engineer ACS TP

Like all other workers working in different places, the representative of the profession in question has many different professional rights. Below, only the most basic rights of the process control engineer will be named.

• The employee is able to get acquainted with the projects and management plans (but only if they in any way relate to the work of the specialist in question).
• The employee is able to submit to the authorities various plans, ideas and proposals for the optimization or modernization of the enterprise.
• The specialist is able to inform the management about various failures, shortcomings and deficiencies in the enterprise. Also, the employee can offer some ideas for eliminating these shortcomings.
• The employee can request from the authorities all the documents necessary for the performance of labor activity. In addition to the documents, the employee may require the management of certain tools or elements necessary for the performance of work.
• Involving specialists from other areas for the sake of solving any job tasks is also included in the list of specialist rights.

Responsibility of the process control engineer

The engineer of the automated process control system has a large number of functions of various complexity. The official duties of this specialist generate a tremendous responsibility. What can the representative of the profession in question be responsible for?

Here are just a few items from the job description:

• The employee bears full responsibility for full execution, or for the performance, but improperly, of his functions and duties.
• The employee must bear responsibility in accordance with the current civil and labor codes of the Russian Federation, if he caused the company material damage or other harm.
• The worker is responsible for committing offenses or crimes committed in the workplace.
• The employee is responsible for conducting any unplanned or uncoordinated experiments in the workplace.

There are other points on which the employee can be held responsible for his actions or inaction. Above, however, the most important moments were mentioned, namely those that are prescribed by the job description of the ACS TP engineer.

Responsibilities of the leading process control engineer

Who is the leading engineer of ACS TP? Properly answer this question will not be so simple. However, it is still possible to compile a relatively holistic picture - if we list the main functions and responsibilities of this specialist. The job description of the leading engineer of the ACS TP practically does not prescribe anything about this specialist. The employee, of course, has a list of duties. For example, the following applies:

• Timely passage of honey. Inspections;
• Observance of labor discipline;
• The specialist is assigned all the functions of the process control engineer, etc.

However, the basic labor functions in the instruction are not given. From this we can conclude that the specialist in question is, you might say, the "starost" in the field of ACS. All duties of an ordinary engineer are shifted to the engineer of the facilitator, however, some managerial functions are also assigned to him.

What should the head of the ACS department know?

Quite complex and responsible is the work in question. The ASU TP engineer is really an important person.

And what about the head of the ACS TP department? The first thing to note is what kind of knowledge the specialist should have. The job description prescribes that the head of the department:

• Should know all the prospects for the development of the organization;
• Must thoroughly know the structure and mechanism of the organization;
• Should understand the procedure for developing projects in the enterprise;
• It is obliged to know all the standards and norms established in the organization.

The head of the department must know and many other things.

The first group of duties of the Head of the Automated Control Systems Department

The official in question has much more responsibilities than the lead engineer of the ACS TP. The job description prescribes the following functions for the head of the department:

• The employee manages the implementation and development of projects based on mathematical and economic methods, means of communication, elements of the theory of cybernetics and economics, etc.

• The specialist is obliged to organize research of the TP system of the ACS, and also to look after the order and planning of production with the purpose of transferring certain processes to automatic mode.
• The specialist is obliged to study the problems of the ACS system.
• The head of the department is obliged to periodically prepare technical tasks for certain production processes.

The second group of duties of the head of the automated process control system

The specialist in question must be involved in ensuring the preparation of plans for the implementation and design of the automated process control system, as well as monitoring implementation, setting tasks, their algorithmization, linking technological support, creating and implementing certain standard blocks.

The head of the department should organize some types of work on the modernization and improvement of the turnover of documents in the workplace. This includes, for example, the definition of output and input documentation, the order of output and input, transmission by connecting channels, etc.

The specialist in question should also supervise the compilation of specific instructions, methodological materials, and other documentation. It is also worth noting that all other work with documentation at the plant should be coordinated with the head of the department.