Drainage mechanism for the toilet is one of its main elements

The choice of modern models of toilet bowls is extensive and varied. Foreign and domestic manufacturers produce products with different arrangement of elements of this sanitary equipment and different materials. Different can be the discharge method, drain design, etc. But the toilet flushing mechanism is an obligatory element, because its main function is the qualitative removal of everything that has entered the bowl of this product.

The drain tank device is quite simple: the filling mechanism and the drain. In quality plumbing, breakages are rare. But most often one of the elements of the drain tank fails. If there are certain skills and tools, you can try to fix them yourself, but beforehand necessarily cut off the water and find the phone plumbing. Despite the apparent simplicity, self-repair toilet seat can present surprises. The material from which the products so necessary in everyday life are made is fragile enough and heavy and if the inept handling is used, it is easy to break the cover of the waste tank, and the replacement is not at all easy to find. Therefore, in case of any breakage, it is better to consult a specialist.

The drainage mechanism for the toilet works on a very simple principle. When exposed to the handle or trigger, the siphon rises and opens the water. Modern models of the toilet bowls have a button to actuate the draining mechanism. Draining siphons can have a different appearance, but the simplest of them is a rubber cylinder, which is commonly called a "pear". It is with his help that the sealing of the drainage hole is achieved. On many foreign models, two buttons are installed and the toilet flush mechanism can operate in different modes: in one case, 6-8 liters of water are supplied, and in the other, only 2 or 4 liters. In this case, water saving is obvious. However, the design of such a mechanism is much more complicated and more likely to fail. In addition, some modern manufacturers have found and successfully use a long time another way. It is much simpler and cheaper. In the toilet tank drain, a mechanism is installed to supply water, the volume of which depends on the duration of the pressure on the lever or button.

Due to a malfunction of the toilet flush mechanism, water can leak constantly. Because of this, the bowl becomes red, and the bill for water is unpleasantly surprising. It also happens that the flushing does not work at all or the water flows almost without stopping. Very often the cause of such malfunctions is very hard water with a high content of various impurities. To avoid such trouble, you should install water purification filters on the cold water that enters the apartment. Thus, you will protect and other plumbing. Another reason for the occurrence of malfunctions is poor quality plastic, from which the flushing mechanism was made. Therefore, when choosing a toilet, attention should be paid to this moment, and it is even better if most of its elements are made of metal. Aging and deterioration of gaskets and other similar elements can also cause a malfunction in the drain operation. In this case, there is only one way to get out of the situation - buying a toilet model with the simplest design.

Before going to the store to buy sanitary ware, it's not at all superfluous to consult a good specialist in this field, which drainage mechanism for the toilet is better. Undoubtedly, he will be able to tell a lot of interesting and useful. Acquire this plumbing product better in large specialized stores to avoid fakes. Although they can also be found in the models of well-known companies, in which mechanisms for draining other manufacturers are installed.