Convector "Electrolux": reviews, instruction

If we analyze the trend in the development of the market for heating equipment in Europe, we can note the ever-increasing popularity of electric heating. This fact can not be called surprising, since the same choice is increasingly made by residents of Russia.

Prevalence of electric heaters

Due to the fact that the gas has not been carried out anywhere, and liquid boilers have not been able to achieve universal prevalence, electric type convectors are being purchased today more and more often. This applies not only to private houses, but also to apartments where central heating does not cope with the tasks assigned to it. The installation of an autonomous system is not always permitted by law, so many families are saved by purchasing electric heaters that make it possible to create a comfortable microclimate inside the home. When you visit the store, consumers are faced with difficulties that are expressed in choosing the best device. Specialists advise choosing electric convectors, which differ in their unpretentiousness in operation, efficiency, practicality and safety.

Why choose an electric convector?

If you decide to purchase the equipment described in the article, you can pay attention to the convector "Electrolux". Such devices distribute hot air throughout the volume of the room noiselessly and evenly. You can prefer a model that is equipped with a fan, this will speed up the heating process. However, in this case, you can not count on noiselessness. It should also be noted that the surface of the device is completely safe, it does not heat above 60 degrees and can not cause burns. This factor plays an important role in the popularity of modern convectors. Convector "Electrolux" differs from oil installations in that it is absolutely not traumatic, which is why you can use this equipment even in the house where there are children and animals.

Reviews about the convector of the brand "Electrolux" with different heating elements

On sale it is possible to meet the described device in which heating elements of one of three kinds are established, among them: monolithic, tubular needles. As for the second type of element, it is supplied with aluminum fins. Needle heating elements are a fairly thin plate of dielectric, on which a chrome-nickel heating thread is installed, it is covered with an insulating varnish during the manufacturing process. Consumers say that the devices with such an add-on cool down and heat up almost instantly. Convection inside the equipment, which is created on the basis of a needle heater, is made thanks to the design of the housing. If you decided to purchase the convector "Electrolux" with such a device, then, as stressed by experienced consumers, it can not be used inside damp premises, because the lacquered surface is almost not protected from moisture.

Advice of a professional

Such units are so popular today because they have low cost, but the durability of the equipment, which quite often can be heard from a modern buyer, raises doubts. In practice, needle heaters in electric convectors are used quite infrequently, but if you still find such an assembly on sale, then it's best to refrain from buying.

Reviews of convectors with a tubular heating element

If you consider the convector "Electrolux" as a heating device for your home, then it can be based on a tubular heating element. It is a steel tube in which a nichrome thread is installed . The tube is filled with heat-conducting backfilling in the form of an insulator. On the tube are fixed aluminum fins, which provide an effective heat return, strengthening convection. According to users, the tubular element is heated less compared to needle, but is more durable. Quite often models of units with TEN are made in splashproof design, which is why they can be used even in bathrooms, which is very popular with modern consumers. If you are not afraid that during use, the difference in the thermal expansion of the ribs and the tube can cause sounds that resemble crackling, then you can safely choose similar equipment for your home.

Customer feedback on convectors with a monolithic heater

Convector "Electrolux", reviews about which are often only positive, can have a monolithic heating element. According to experts, it is the most acceptable option, since it differs by noiselessness. Due to the fact that the heater body is integral and the ribs are an integral part of it, the equipment does not create additional sounds during use. Such devices are most popular due to the fact that they operate with the lowest heat loss, and also are highly efficient. Professionals are advised to choose models with a tubular or monolithic version of the heating element. The latter variety is an ideal solution.

Instructions for use

If you purchased an electric convector "Electrolux", then you should think about where it will be located. The device can be mounted on a wall, while it will be necessary to use special fasteners that come with the equipment. Quite often, consumers choose mobile models that can be moved from room to room. If you are more interested in the second option, you need to pay attention to whether there is a complete set of wheels, which eliminates the need to search for this fittings in the shops of the city. If you are considering at the point of sale convectors "Electrolux" with an electronic thermostat, it is important to pay attention also to the overall dimensions of the device. This will allow you to harmoniously fit the equipment into any interior. The most elegant models that are plinths can have a height of 15 centimeters.

Reviews about the capacity of the convector brand "Electrolux"

Convectors of heating "Electrolux" can have different capacities. The choice of this indicator can be made by the following formula. It involves the use of one kilowatt of power per 10 square meters of floor space. This is true if the ceiling height does not exceed 2.7 meters. If this number is greater, then for every 10 centimeters of height it will be necessary to add 10% of the power. In the opinion of experienced users, it is important to take into account the fact that heating with a convector can not be the main one. In order to provide quality heating, you need as many convectors as there are in the windows. If it is a corner room or a room that is located above a cold basement, and also has a large glazing area, then it will take a sufficient supply of power, experts advise paying special attention to this.

Comments of consumers on the thermoregulator in the convector construction

If you decide to purchase the convector "Electrolux", the instruction for use of which was presented above, it is important to take into account also the fact that the maintenance of the inside of the building with the required temperature corresponds to a thermostat that is part of the described equipment. When you visit the store, you can choose a model with electronic or mechanical thermostat control. Those consumers who wish to save money get devices with a mechanical thermostat, as it cheapens the cost of the design. However, in this case, you should be prepared for some inconvenience, among them - the consumption of large amounts of energy, poor temperature holding, as well as characteristic clicks when turning off and on. As experts advise, it is best to purchase wall convectors "Electrolux", which have electronic thermostats. Of course, they win against the background of mechanical ones.