Bouquet of satin ribbons by hand. Roses, tulips from satin ribbons

Today we will tell you and show you how to create a bouquet of satin ribbons by yourself. The main advantage of colors from satin ribbons is their durability. They will never fade and will rejoice with their beauty for quite a long time.

Tulips from satin ribbons

It is a spring flower that can easily be made from such an accessible material. Pleasure yourself and your loved ones with this beautiful piece of spring. To create it does not require any special skills, so you will certainly cope with the task.

To create tulips from satin ribbons, we need the following materials:

1. Needle.
2. Satin ribbons in different colors.
3. Scissors.
4. Thread.

The procedure for creating a tulip

Work order:

1. First of all, it is necessary to fold the satin ribbons together with the opposite sides to each other. The ribbon located on top will be the inside of the tulip, and the lower will be the outer side.
2. Fold both strips at an angle of 90 degrees and fasten everything with a clamp or an invisibility.
3. You do not need to remove the clamp, but again it's worth bending the ribbon. Fold the top down.
4. Turn the composition to the left at an angle of 90 degrees.
5. Fold the upper right piece of the strip and secure.
6. Repeat the previous step.
7. Repeat steps 4-6.
8. Turn the composition over to the other side.
9. Cut an extra piece of the main material so that a square is obtained.
10. Sew a thread with edges marked with a dashed line that formed at the place of the clamp.
11. Now remove the thread.
12. Unfold the resulting flower.

You can make tulips using another method. You can even make some flowers and create a whole bouquet of satin ribbons with your own hands.

Roses from satin ribbons

Making roses from satin strips is a simple process. Rudders can easily make them a real masterpiece. You can collect a whole bouquet of roses from satin ribbons. They can be used as a piece of furniture or for a festive celebration.

To create a single-colored rose we will need:

• Scissors.
• A long satin ribbon.
• Threads are the same color as the ribbon.
• Needle.

How to make a rose

The procedure for creating a rose from a fabric is quite simple:

1. Grasp the edge of the satin ribbon and bend it at a 45-degree angle. Do not forget to leave the tail, but small. The place of the bend should be sewn with a thread of the same color as the ribbon itself.
2. Now create a triangle. Bend the strip, only now on yourself, in order to get a geometric figure. Again leave a small tail and staple.
3. Bend again. Do it as if in a circle, but do not be surprised if you get a square. The tape should close the tail, left after the first bend. Sew it again. Make another fold.
4. Turn the resulting square so that the free part remains below, and continue to work. The tail that you got right at the beginning of the work is now visible on the right side of the square. You should turn the product over so that the ribbon lies on your fingers.
5. Bend the tape in a square at the same angle, but do not stitch it, but simply fix it with your fingers.
6. These squares will be the petals of your rose. Consequently, the splendor of a flower depends only on their quantity.
7. Form the core from the remaining piece.
8. Slightly straighten the petals.

You can make a bouquet of satin ribbons with your own hands, using the roses you got.

We create a bouquet of satin ribbons with our own hands

The main materials for creating a bouquet are:

1. For a single rose, you need a 65-cm ribbon, the width of which should be 3 cm.
2. Ruler.
3. Stapler.
4. Scissors.

To make a bouquet of satin ribbons, you need:

1. Cone for a bouquet.
2. A ball with a diameter of 10 cm, preferably it is made of foam. It must be cut in half.
3. The glue gun.
4. Wooden round handle.
5. Rhinestones and a narrow ribbon for decoration.
6. Satin ribbon width 4 cm.
7. 25 collected from ribbons of flowers.

The procedure for creating a bouquet

The production of bouquets from satin ribbons is also very simple and will even turn out for a beginner, you can not doubt it. The main thing, follow the points below:

1. In polystyrene it is necessary to cut a groove in width equal to a wooden handle and a depth of 1.5 cm.
2. Using a glue gun, we glue a pen to the foam plastic.
3. Expand the base to the size of the handle.
4. On its circumference, from the upper side, we apply hot glue and insert and press the pen from the foam. Wait until it is stuck.
5. You should get a pretty pretty base.
6. Cover the bottom of the handle with a white tape.
7. The base of the cone is covered with a satin ribbon, making skladochki.
8. Cover the whole handle.
9. Start with the top to glue the roses in such a way that the base is not visible.
10. We decorate the handle with a narrow band and rhinestones.

Your bouquet is ready!

The bride's bouquet

This is the most important element in the image of the bride. A form for such a bouquet is a ball. This day is the most important for a girl, and what can be the best reminder of him than a bridal bouquet of satin ribbons? He will not fade a few days after the holiday and will serve as an excellent talisman.

To create a bouquet, we need:

• White tape - 10 cm.
• Multicolored ribbons - from 2 to 6 cm.
• Varied pins, you can with beads on the end.
• Beads that will blend in with the ribbons.
• An impenetrable cloth.
• Super glue.
• Newspaper.
• Cord.
• Needles.
• A wooden stick.
• Scissors.
• Ruler.
• Threads.
• Pencil.
• Compass.

Getting Started

The very first thing you should do is prepare a round base for the bouquet. This is the main detail, to which all other elements will be attached.

To create a framework, you need to do the following:

1. Form a ball from the newspaper. Previously, you need to crumple the newspaper. The diameter of the resulting circle should not exceed 10 cm.
2. While retaining a round shape, it must be rewound with the cord you have.
3. Make in it a recess for the stick and fill it with glue.
4. Install the handle and wait for it to dry.
5. Wrap the wand with a cord.
6. Open the edge of the handle with tape.
7. Tape the entire handle with a satin ribbon.

At this stage, the process of creating the basis for the bouquet is completed, and we proceed to its further design. To do this, we need to glue to the ball all the pre-prepared roses. Here you need to give vent to your imagination, but the main thing is not to overdo it. You can use all kinds of rhinestones, beads and other elements for decorating a bride bouquet.

Another way to create a bouquet

Materials:

• Disk.
• Mounting foam.
• Satin ribbon.
• Plastic pipe 15 cm.
• Hairpins and beads.
• Scissors.
• Candle or lighter.

Work order:

1. Press out a small amount of foam on the disc and allow it to dry.
2. Cut off all that is superfluous.
3. Glue the pipe with hot glue to the disc.
4. Using the same glue, attach the roses to the base. The main thing is how to glue flowers to the base as tightly as possible.
5. Cover the disc along the edge with a lace ribbon.
6. The center is best covered with a simple white tape.
7. Do not allow the formation of gaps.
8. Make ribbons out of ribbons.
9. They need as much as the lumens.
10. Wrap the handle with a ribbon and decorate as desired.

That's the whole secret of creating such charming bouquets of satin ribbons with your own hands. Good luck to you! The main thing, do not worry. Even if you have never worked with satin ribbons, do not be upset. The procedure for creating flowers and bouquets from them is quite simple, and even the most skillful needlewomen can not cope with it. Turn on your imagination and make what you bring joy.