We study how to choose a gas column

Without hot water, comfort in the house is unthinkable. Even the presence of a separate bathhouse in private estates is not a sufficient reason for refusing an intra-house water supply. At least because the bath does not replace a hot shower or bath in the hot season, when you have to wash several times a day. And the dishes require hot water. Not surprisingly, for many, the most real sick place is the question of how to choose a gas column. This can be explained quite simply: if before the gas water heater of the flow type was actually a tank with an atmospheric burner and a system of cranes, now many speakers have got an intelligent system for adjusting the flame (modulation), various ignition solutions, etc. Since there are problems with where to buy a gas Column, now does not arise, because they are in every household appliance store, then we will consider some basic selection criteria. Since it is impossible to cover all the nuances in one article, we will dwell only in detail on some of the main points.

A few recommendations

Before we deal with the question of how to choose a gas column, we point out a number of general features. Before you go to the store to buy, you need to determine the necessary shape, dimensions and location of the new home appliance. Otherwise, you can face the situation when the purchased column will not be possible to place in the planned location, or you will need to change the interior and related structures, which, although feasible, is unlikely to please anyone. The classic coloring of this group of devices is white, but recently the market offers other options. Also, many are interested in the question of how to install a gas column. The answer to it is simple: it is work for the representatives of the gas economy of the locality. If the installation and connection with the water pipe can be done on their own, then the connection to the gas system can only be carried out by gas engineers. They also give permission for the organization of a system for the removal of combustion products.

Power

So, how to choose a gas column? One of the key characteristics that consultants pay attention to is the power in kilowatts. It has nothing to do with the electric parameter of the same name, just indicating how quickly a certain amount of water will be heated per unit time. In other words, if one-time use of the column is planned for several water-pumping points, it is necessary to consider options with a power of 20 kW, but for a bath alone, or even more, the shower is quite enough and 17 kW. It is difficult to name exact values, since everything depends on the person's preferences: one bucket of warm water is enough, and another one will not seem enough for a bath.

Scorch

The most common devices with one of three options of ignition. The simplest is manual piezo. In such solutions, a system with a button is installed inside, when pressed, a spark arises and lights the ignitor flame. Then, when the hot water tap is opened, the main burner ignites. Although the igniter can be left burning, its constant use leads to a gas overload.

Two other solutions allow you to automate the process. In the first one, a spark from the batteries is used for ignition (it is necessary to periodically change), and in the second one from a small hydrogenerator whose blades rotate water flowing through the pipes (when the crane is opened).

Adjustment

Few people know that the temperature of the water should be adjusted so that its dilution is not required to be cold. Three solutions are used for control: step and continuous adjustment, as well as automatic modulation of the burner flame. In the first two cases, the desired heating level is pre-set (depends on the head), but in the second one the column itself controls the intensity of the flame while maintaining the desired temperature.

In how to choose a gas column, there is nothing complicated. Everything determines the budget and the desired characteristics.