We make trees with our own hands from paper: there is nothing easier!

To date, there are various ways of how to make trees with your own hands made of paper. The simplest of them is a usual applique. But there is also the possibility of using a wire to make a more natural forgery. Each of them has both advantages and disadvantages. The simplest way is the first option. But the second is much more complicated. But still they are able to do to everyone, regardless of skill.

Application

The first execution in this case is a 2D model. As a basis, a sheet of cardboard or whatman is used. Then from the brown paper cut out the barrel, previously marked it. Similarly we get a green crown. In the same order, we paste them on the base. After proper processing, the hand-made article is ready. But there is also a more interesting way of how to make trees with your own hands out of paper in this case. To do this, you need an empty metal can of coffee without a lid. It is filled with soil or sand for stability. The outer side of the can is pasted with a strip of brown paper. The top, in turn, is covered with a green circle. Further, the crown is made earlier and is cut out. The only difference is that it should be two-sided, not one-sided, as in the case of appliqués. The crown is placed on a pre-prepared barrel and fixed with adhesive tape. For greater naturalness, 2 or 3 parts can be made. In order for them to intersect naturally in the center, they are cut in half. And one of them is cut at the bottom, and the rest - at the top.

Christmas tree

As the basis in this case, the same metal can from coffee. It is filled with soil or sand. Next, there are two options for how to make trees by hand from paper in this case. In one of them, it is pasted with brown paper from the outside. In the center of the can, the trunk of the tree is set. Green leaves are put on it in order of decreasing the area. In this case, the shape of such a green beauty can be any. After all the paper leaves are worn, it needs to be properly decorated, and the New Year's masterpiece is ready. In the second case, you need to make a cone out of green cardboard. He must firmly rely on the bank - this will ensure the necessary level of sustainability of the future craft. Next, the cone is worn with ornaments. The Christmas tree is ready. This is one of the most simple ways to get a tree from colored paper.

Tree of Happiness

This article has the highest level of complexity. To create it you need to have a lot of perseverance and patience. First, we take a flower pot and fill it with soil or sand. From above all this is covered with a layer of seashells or coffee seeds. Further in its central part, a 20-30 cm long branch is established. In the next step, we need a ball of foam. In it it is necessary to make such a hole that he could easily hope for a branch-trunk. If necessary, it is fixed with the help of an adhesive tape. Then the surface of the ball is covered tightly with paper cuttings. After the glue has dried, the hack is ready. Such a tree of paper with their own hands is the most difficult to make. At the same time, a standard set of materials and tools is indispensable.

Results

This article describes various ways in which trees can be made from paper by hand. They differ in the level of complexity and the list of necessary materials. Everyone can find one that suits him best.