Business woman with her own hands: ideas and master classes

Do you have many cards and you want them to always be in order? Then they need to be arranged, putting in a place specially allocated for them. This is a business card. It is not necessary to buy it for a lot of money, but you can do it yourself. Besides, a man-made thing will be a wonderful gift to an expensive person. The business card holder can be made of cloth, leather, paper and other interesting materials.

We are sewing a business card

From a dense fabric it is necessary to cut out two rectangles under the size of cut- aways (approximately 10 on 5 centimeters) and iron an iron. Now, from one wide edge, bend the material a little and lay the stitch by hand or on the sewing machine. It will be pockets for business cards.

From the fabric, we cut out the front part (about 13 by 10 centimeters) and iron it with an iron. We attach to it with needles on the sides of the pockets. On the one hand we sew the button, on the other - the eyelet. Now you can flash the product around the edges. Correct from inside the corners, helping yourself not with a pen or pencil. To the cardholder, made with his own hands, well formed, we make a seam in the middle. If necessary, we decorate to taste and lay out cards on their rightful place.

It is not necessary to take a needle in order to make a fabric business card. If you do not know how or do not like to sew, use the following production option.

Tissue card holder without sewing

First, we'll make the blanks for the cover.

• Two rectangles of cardboard - one 13 x 9 centimeters, the other - 13 x 3 centimeters.
• Pattern made of cloth (27 by 18 centimeters).
• Two pieces of foam rubber 13 x 9 centimeters and another 13 x 3 centimeters.
• Two double-sided scrapbooking sheets.
• Two narrow wide satin ribbons about 19 centimeters long.

You can also prepare decorative elements, so that the card holder for the discount cards with her own hands becomes more beautiful and original.

We make the workpiece for crust. Foam and cardboard glued together. On the fabric with a soft part down we spread the resulting details so that there is a small distance between them (approximately 3 millimeters). We cover the cardboard with glue and bend the edges of the fabric to it, first cutting off a few corners. The wrong side should be closed with scrapbooking paper. It should be less than a millimeter crust by two. Therefore, if necessary, we cut and paste.

Now let's move on to the inside, where the business cards will be put directly. We will cut the scrapbooking paper into two strips and glue them together. It should be one long. A business card holder made with her own hands, maybe more or less, just adjust the length of the strip in the desired direction. We put it into an accordion with six sections, leaving reserves on each side. If you made a different length of the strip, accordingly, the number of pages will change. For each section we paste pockets or envelopes, where cards will be put.

Now we take the ribbons, we process the edges with a lighter. We glue them to the outside of the cardholder and close it with a decorative element (a piece of colored cardboard, brooches or something else). The card case is ready.

Business card holder with own hands made of leather

From the skin we cut out a rectangle, which when folded three times in size is suitable for business cards. Unroll a piece and along the long side in the middle of the chalk draw a line. At this point, mark the location of the rivets. Attach them to the skin.

Mentally divide the business cardholder into three rectangles. Two of them fold together and around the edges with an awl make holes. With a dense thread, sew one side, and then the other. Well fix the lines so that nothing is blown out during use. The business woman is ready.

Express-card holder with her hands from paper

Take a square sheet with a side of 20 centimeters and fold it in half. Do the same with each half. Expand the sheet, there are three fold lines on it. Before the side, bend all four corners. Now, each halve to the center line.

Unroll the sheet to the other side. On the bottom line of the triangle, bend the paper from one edge, then from the other. Slightly insert one half of the sheet into the other. Draw your hand along the lines. The result was a square. Now fold the paper perpendicular to the inserted halves. You should get a rectangle, when you open it you will see pockets. In them, and you need to fold the cards.

Business card holder from the video card

If you think how to make a business card with your own hands in an unusual format, look for a detail among the spare parts from the old computer. For example, you can use a radiator from a non-working video card. Just unplug it from the motherboard and remove the thermal paste. Now the radiator can be used as a stand for cards. If you also zadekorirovat this creation, then no one will distinguish it from the purchased business card.

Such a simple thing, like a card case, will save you from their constant search for a bag, apartment or office. Therefore, make sure you make your unique business card.