Tinting yourself - instruction

Many beginners, and experienced motorists do not know how to make toning their own hands. In this article, we will consider the main points, and also give a detailed instruction so that everyone can perform the work independently. The whole process is simple, but requires attention and accuracy, so do not neglect the rules about which you will learn. Not everyone wants to give money to hang stickers on the glass, where better to do everything yourself. First, you can be confident in the quality of the work, and, secondly, you will have a personal experience in repairing the car.

It is worth noting that you can not tint damaged glass. If you have a problem with this, you need to contact the workshop where they will be replaced.

Auto tinting is a long process, so you need to carefully prepare for it, you will need:

• The film itself for toning.
• Rubber spatula, which will have to iron the sticker. It is important that its surface is just rubber, otherwise it can damage the glass.
• Napkin without lint.
• Detergent.
• Sharp blade or clerical knife.
• Sprayer (can be bought at any hardware store).
• Warm water.

Now you can proceed to the work itself.

Start

Toning with their own hands begins with the fact that the glass is thoroughly washed and cleaned of dust. It is important that the surface treatment of glass is necessary on both sides. To do this, apply soapy water on it, then wipe it dry. Next you need to make sure that the glass is absolutely clean, you need a sharp blade.

Now you can prepare a solution that will help accurately place and strengthen the toning on the glass. To do this, use a shampoo or any detergent. It must be mixed with warm water and beat to a thick foam. Now transfer the resulting liquid to the nebulizer.

Pattern

At this stage, you need to accurately measure the size of windows to cut out the film without the slightest error. You can do it in another way. It is enough to apply a sticker to the glass and cut out the outline. It is important that the cut must first side and bottom, after which you can go to the top. Automatic tint with their own hands is almost ready, it remains only to properly place the film on the glass.

Accommodation

So, after you've got the finished piece of film, it needs to be applied to the glass. To separate the two parts of the film, use a double-sided adhesive tape. Stick it from two sides to different levels, then stretch it in opposite directions. Now attach the film to the glass and adjust it strictly to a millimeter. Since the glass was coated with a special tool, the toning will be easily imparted to the movement. Then break the sticker with a rubber spatula.

Toning of other glasses

As it was said before, toning by one's own hands requires certain attention and accuracy. Therefore, first you need to practice on the side windows and only then go to the back. In general, the process is no different, but the fact is that the rear window is slightly arched, and this will complicate the application of toning.