Technoruf Н30: technical characteristics and features

"Technoruf Н30", the technical characteristics of which will be able to see below, is a heat and soundproof material made on the basis of mineral wool.

general description

"Technoruf Н30" is a hydrophobized non-combustible sound and heat insulating material, which is executed in the form of plates. Mineral cotton wool in its basis is made on the basis of rocks, which belong to the basalt group. Among the ingredients is a low-phenolic binder.

The purpose of the insulation

"Tehnoruf Н30", the technical characteristics of which you should be aware of before the acquisition, is intended for equipping the thermal insulation layer in roofing systems made of metal profiled flooring or reinforced concrete. Among other things, this material can be found as a protective screed in industrial and civil construction. It found its wide distribution in the process of carrying out new works and reconstruction of buildings, as well as structures that can have all sorts of purposes.

Storage Recommendations

"Technoruf Н30", the technical characteristics of which force consumers to choose their choice in his direction, should be stored in a covered warehouse. It is permissible to leave the material under a canopy, which is able to protect the plates from the negative effects of atmospheric precipitation. It is recommended that the sheets are stacked on pallets or in containers during storage. The height of one stack should be 2 meters. Do not exceed the above parameter.

Basic physical and mechanical features

Technoruf Н30, whose technical characteristics are of interest to many consumers today, has a compressive strength at 10% deformation within 30 kPa. Specialists are often interested in concentrated load, it is equivalent to a value of 400 H. Material is not combustible, and its vapor permeability is 0.3 mg / (m · h · Pa). Moisture by weight at purchase can not exceed 0,5%. Under the action of water, the water absorption by the total volume can not exceed 1.5%. Among the remaining ingredients, the organic matter content is 4.5%. The density of the material can vary from 100 to 130 kilograms per cubic meter.

Geometric parameters

If you decide to purchase a heater "Technoruf H30", it is important to ask about its standard parameters. The manufacturer produces plates, the length of which can be equal to 1000 and 1200 millimeters. The width can be chosen from two indicators, which are equal to 500 and 600 millimeters. Thickness with a step of 10 millimeters varies from 50 to 200 millimeters.

Positive features

Plates Technoruf H30 have a lot of advantages, among them you can select a fairly long life, resistance to significant temperatures, as well as impressive compression strengths, which were presented in figures above. The material can be used without the danger that it is capable of damaging human health, since only natural components are used in the production process. The insulation has a low water absorption and helps to suppress noise. It is noteworthy that parasites and microorganisms can not arise and multiply on its surface. You can count on the resistance to chemical attack, in addition, even the most inexperienced home master will be able to cope with the installation work. This is due to ease of installation, because the material has a low weight, so you can easily lift the plates alone.