Sticky wallpaper for painting. How to glue nonwoven and fiberglass wallpaper?

Structural wallpaper Marburg for painting - a brightly prominent type of wallpaper among the entire range of finishing materials. Their peculiarity is a combination of the positive characteristics of traditional roll wallpaper and the possibility of painting with emulsion or acrylic paint.

They are suitable for gluing both walls and ceiling. Having pasted such wallpaper once, you can not think about selecting and buying new ones, when it becomes necessary to do repairs. They can be repainted more than once.

The main advantage of the structural wallpaper is a wide choice of materials of different textures (relief patterns) that can be painted in different techniques.

Today we will try to understand the subtleties of the choice of material and understand how the wallpaper is glued for painting.

Wallpaper for painting: species diversity

Structural wallpaper is divided into three groups:

• Duplex paper;
• Non-woven fleece;
• Glass fabric wallpaper.

Choose wallpaper for painting

They are easy to distinguish by color - they are always white and deep relief texture. Structural wallpaper is durable. They withstand a large number of repaints, while retaining their aesthetic appearance. The optimal number of updates for paper wallpaper for painting (cheap) - up to 7, non-woven - up to 15, glass coverings - up to 20. Service life - up to 30 years.

Structural wallpaper Marburg perfectly mask the unevenness of the walls, which at a low price for the finishing material makes them the preferred choice. Expensive wallpaper with a beautiful pattern in recent years, choose only those who are going to do a home design repair.

Features of paper wallpapers

Paper structural wallpaper consists of two layers: the first - paper, the second - with a special water-repellent impregnation, increasing the wear resistance of the material. In addition, the waterproof layer allows you to do a wet cleaning of the walls covered with them.

Features of non-woven wallpaper

Non-woven wallpaper show a high level of adhesion with the surface that is pasted on them, which not only makes it possible to hide the flaws of the walls, but also to give them additional strength. At the core of such wallpaper is nonwoven fabric, on top of which is applied a foamed vinyl cover with perforations. This coating differs plasticity, so the wallpapering on the wall is practically devoid of significant drawbacks. It is used for finishing new buildings and houses, which can eventually shrink. The non-woven layer will not only not break, but also will not allow the cracks to spread.

Features of fiberglass wallpaper

The basis of the third type of structural wallpaper is made of non-woven, and for the top layer is used fiberglass (made of quartz sand with the addition of different impregnations). Hence the name - glass wallpaper or fabric wallpaper.

Tissue they are called because of the possibility of imitation of textile texture: "canvas", "matting", "spider". The distinctive characteristics of glass coverings include high moisture resistance, fireproof properties, increased strength, wear resistance. This is the best option for finishing office and public premises, cafes, hotels and boutiques.

Important! Fiberglass in combination with non-woven base is excellent for strengthening walls and partitions, constructed from foam blocks or plasterboard.

Generalized rules of pasting

1. Even if you do not need to finish the ceiling, finish all the preparatory work of the surface (plaster, primer, paint) even before the walls are finished.
2. Walls before the pasting necessarily prepare: new walls plaster and primruntuyte, the old (from which the wallpaper is removed) - it is enough to progruntovat. You can proceed to the sticking only after 24 hours, when the primer is completely dry.
3. Open the paper wallpaper linens with a margin of up to 5 cm from the bottom and from above. Non-woven wallpaper can not always be cut, and wallpaper based on fiberglass is glued to the wall with unwinding the roll, and then cut.
4. The consistency of the wallpaper glue for duplex paper wallpapers should be thicker than for simplex paper. Preparing the adhesive composition is necessary, strictly following the instructions.
5. Too liquid glue will soak and soften the wallpaper, making them more vulnerable. In addition, heavy cloths can not be kept on the wall and fall off.
6. Flizelinovye and wallpaper based on fiberglass are glued to a special glue.
7. Since the wallpaper is glued to butt, the work starts from the corner from left to right. Since the wallpaper sheets are dense, the overlap will look unaesthetic, especially after painting.
8. Punching corners must be given special attention. When making corners, the strip of wallpaper is glued so that it only comes a little to the side of the next corner.
9. The next cloth is glued over. Applying wallpaper to the wall, draw a vertical strip of marking in the middle of a double layer of wallpaper. Armed with a ruler and a clerical knife and cut the wallpaper on this strip, removing the trimming and smoothing the joint.
10. Having finished the work, the places of joints of walls with a ceiling and a floor at will can be issued with a plinth and a baguette which fulfill not only a decorative function, but also will help to seal joints.

Technology paper pasting wallpaper

Working with two-layer wallpaper does not differ from pasting with conventional paper. Having smeared the canvas, fold it with an accordion and let it be covered with glue, postponing it for a few minutes. While waiting, you can glaze the next piece of wallpaper with glue.

When the wallpaper is impregnated with glue, unfold them and paste them on the wall. Do not forget to smooth the canvas over the surface, using a wallpaper brush, roller or gauze to do this. The remains of wallpaper cut with a construction or clerical knife, when dry.

Many people ask: "How much do the wallpaper for painting dry after gluing?" And the experts have an answer to this question. It all depends on the amount of glue applied, but it takes at least 24 hours to dry completely.

Note that when handling paper wallpaper, you must be careful: from excess glue, they can stretch, ripple or tear, sometimes when gluing too wet paper cloth loses its relief. Due to the fact that wallpaper on paper basis is very delicate.

Technology of pasting with non-woven wallpaper

Flizelinovye - the best wallpaper for painting. This process differs from the previous, and in comparison with other techniques has distinctive characteristics. Deficiencies that are present in paper work, there are no flizeline wallpapers: they do not bubble, do not tear and do not deform.

Thin non-woven wallpaper is cut into strips, spread with glue, leave it to them. Sometimes both wallpaper and wall are smeared with glue, but most often this need disappears, and only the surface of the wall covers the adhesive composition.

The gluing of wallpaper for painting (non-woven) looks like this:

1. Glue the area of the wall is slightly larger than the width of the wallpaper itself.
2. The wallpaper is unwound from the roll and pasted onto the wall. Pressed with a rubber spatula, cut off on the line of the plinth. With this technique of gluing, there is usually no need to smooth the wallpaper: they themselves fit well on a flat vertical surface.

Technology of glazing with fiberglass wallpaper

When starting to work, primetrutuyte walls with a colorless latex primer, as wallpaper based on fiberglass is fairly transparent.

The method of pasting walls resembles the technology of decoration with non-woven wallpaper. The only thing that is different is glue. For fiberglass wallpaper, you need to buy a special adhesive compound, designed for heavy types of cloth.

After gluing, when the glass-cloth wallpaper is dried, they are additionally covered with a layer of glue, over which the paint is applied.

Important! Dyeing fiberglass is possible only after the primer layer has dried completely.

Wallpapering under the painting involves the use of a special water-dispersion or latex paint. Using a color shade, it can be painted in any color.

In comparison with other types of wallpaper, the wall covering based on fiberglass has high strength characteristics. Walls with this finish are not afraid of scratches, or other mechanical damage. In addition, such wallpaper can be washed with a brush and detergent, not afraid to spoil them.

Pasting wallpaper for painting - it's not only practical and economical. With such a finishing material, it's easy to work, and you can apply paint in any technique, which makes it possible for the imagination to fade.