Rolled waterproofing "Technonikol": characteristics

If it is good to waterproof the building in its particularly vulnerable parts, then you can ensure the construction of any destination with high performance. A quality insulator can increase the level of surface hydrophobicity. With the help of good material, you can cope with mold and fungus, improving the indoor climate. Among other things, with the help of such measures it is possible to increase the frost resistance of the material, eliminating the destruction of the structure of load-bearing structures. However, before starting work it is important to choose the right material, which can be oklechny, omazochnym or membrane. One of the most famous is the roll waterproofing "Technonikol", which is strengthened on the protected surface by an adhesive layer or by fusion. With the help of this technology, it is possible to create an internal and external barrier with a different degree of vapor permeability.

"Technonikol" - waterproofing roll, reviews about which only the most positive, is created on the basis of thermoplastic polymers and applied to the surface with mandatory heating. Such material will not be afraid of reduced hydrophobicity in the area of joints. Polymer coatings have no connections, and the edges of the rolls can be strengthened by diffusion welding, turning the scattered sheets into one single web. The company "Technonikol" in the production of roll materials uses not only polymer materials, but also synthetic rubber. The sheets are glued together with a compound or a usual solvent. The resistance to mechanical damage is much higher. But the speed of installation of rubberized materials is reduced, if we compare them with polymer coatings. Below you will find the most common roll materials from the manufacturer "Tekhnonikol", as well as their characteristics, which will allow us to understand which varieties to give preference.

Characteristics of "Technoelast ALPHA"

This roll waterproofing "Technonikol" is a material that is made of polyester. The latter in the production process is combined with an aluminum screen that is able to hold the gas. On both sides, the insulation is carried out by applying a bitumen-polymer binder layer. The presence of a metal screen inside the material allows him to show the ability to protect underground premises from the spread of gases by the type of methane and radon.

The material can be used in all climatic zones and has an increased waterproofing ability. The polymer film is used as the upper and lower protective layers. Its thickness is 4 mm, the error in both sides can be 0.1 mm. The weight of one square meter is 4.95 kg with an error of 0.25 kg. It is worthwhile to ask also the breaking force in the transverse and longitudinal directions. These characteristics are 400 and 600 N, respectively.

On a bar with a radius of 25 mm, the temperature of flexibility does not exceed -20 ° C, while the heat resistance is 100 ° C. The length and width of the roll are 10 and 1 m, respectively. As for the vapor permeability, in this case it is 0 kg / (psPa).

Description "Technoelast GREENE"

As is known, modern roofs perform a protective role and are a part of the building's design: they carry an aesthetic load. An increasing number of today find interesting roofing systems. The variety of such systems on which plants are planted is called green, they turn into real gardens, but beauty requires sacrifice. In addition to the usual destructive factors that affect the waterproofing materials in the construction of such roofs, microorganisms appear, the root systems grow and begin to destroy the layers. To prevent such consequences, the "Technoelast GREENE" is used, which is resistant to mechanical damage and chemicals.

Characteristics of "Technoelast GREENE"

"Technonikol" is a waterproofing of a roll roof, which is used to construct a protective layer of various building structures and structures. The thickness of the material can vary between 4 and 4.2 mm, and the mass of one square meter is 5 kg. The breaking force in the transverse and longitudinal directions is 400 and 600 N, respectively. The temperature of flexibility does not exceed -25 ° C, and the heat resistance remains the same as in the above-described case.

Reviews about "Technoelast EPP"

If you need a roll waterproofing "Technonikol", then consumers are advised to pay attention also to "Technoelast EPP", which is a modified material of increased reliability, which performs many tasks. It is intended for the construction of roofing carpets of buildings for different purposes, waterproofing the foundation and other structures, which are very high reliability requirements.

According to users, the material can be used in all climatic zones. The manufacturer states that the element of "Technoelast" is a cold of the polar night. It should be used where other materials can not provide the proper level of protection against water. He embodies serious construction projects and guarantees high reliability. Its production is carried out by applying a bituminous-polymer binder to the substrate. The latter contains bitumen, fillers and thermoplastic. In the role of a protective layer, fine-grained powder and a polymer film are used.

Main characteristics of "Technoelast EPP"

Laying "Technoelast" is necessary with the help of a propane torch. The upper and lower coatings consist of a film. But the mass of material per 1 m ² is 4.6 kg. The tensile strength in the transverse and longitudinal directions is 400 and 600 N, respectively. If we are talking about fiberglass, then these figures increase to 900 and 800, but when you have the materials on the glass fiber, their tensile strength is 294 N. The thickness of the canvas is 4 mm, and its water absorption during the day by mass does not exceed 1%. The weight of the binder on the side of the deposited layer is 2 kg / m ² . You may be interested in the temperature of brittleness of the binder, it is -35 ° C. This roll waterproofing "Technonikol" shows the qualities of absolute water resistance at a pressure of 0.2 MPa during the day.

Characteristics of the "Technoelast barrier"

The roll waterproofing of the foundation "Technonikol" is presented for sale in the form of varieties "Barrier" and "Barrier light". In the first case, the material is a polymer film, on one side of which a self-adhesive composition is applied. The sticky side is laid on the foundation surface and due to its elasticity, as well as flexibility provides high protection of the structure against water penetration. The thickness of the material is 1.5 mm, and the mass m ² is 1.5 kg. Conditional strength is kept within 1 MPa, while temperature flexibility is -25 ° C or less. The heat resistance of this waterproofing is 85 ° C, and the elongation at break is 200%.

What else you need to know about the "Technoelast barrier"

This waterproofing pasting roll "Technonikol" has the strength of adhesion to concrete and metal, which make up 2 MPa (kgf / cm2). The top layer is a thick polymer film, while the lower layer is an anti-adherence film. Products are supplied in rolls, the length and width of which are equivalent to 20 and 1 m, respectively.

Features of Barrier Light

This self-adhesive material is intended for internal premises, and if necessary, the laying of ceramic tiles, there is no need to prepare a waterproofing base. This variety is a modification of the material described above, which has elasticity and flexibility. From the analog it has a top coating, in the role of which a non-woven fabric is used. On the latter, it is possible to lay ceramic tiles on the waterproofing.

The material can be used in all climatic zones. If you carry out waterproofing of the foundation with roll materials "Technonikol", in particular "Barrier light", then for its installation it is necessary to wait for the temperature, which is in the range above +5 ° С. If the conditions do not meet these requirements, the base warms up, as does the bottom surface of the material. On the underside of the waterproofing, remove the siliconized film by gluing the material to the surface.

Characteristics of "Technoelast Barrier Light"

The thickness and mass of the coating remain the same as in the above-described case, this can be said about the conditional strength. The relative elongation is 200%, but the bond strength with concrete and metal is 0.2 MPa. If you are interested in the products of the company "Tehnonikol", the waterproofing roll self-adhesive, which was described above, will be an excellent solution for the work. You should expect that the length and width of one roll are 20 and 1 m, respectively. Storage should be carried out at a range from -15 to +30 ° C, while the material must be protected from direct sunlight.

Characteristics of floor waterproofing

The roll-on waterproofing of the floor "Technonikol" can be laid on reinforced concrete or wooden grounds under the screed or ceramic tiles. The weight of one square meter is 1.5 kg, but the water absorption within a day does not exceed 1% of the mass. The material is characterized by full waterproofness and softening temperature of the binder, which is in the 85 ° С area. The relative elongation is 60%, but the bond strength remains the same as in the above case.