Pump rifle "Bekas-12 M": characteristics and photos

All existing modifications of weapons of the brand "Bekas" are developed at the Vyatka-Polyansk Machine-Building Plant. The very first pump model called "Bekas-16" went on sale in 1997. This option, designed for ammunition of 16 caliber, did not make a special impression on hunter-lovers. Nevertheless, the next modification, "Bekas-12 M", and further transformations of this domestic model range have turned the brand into one of the worthy ones, which they started talking about.

Changes and improvements

Over the next few years, the design of the model has undergone some changes. The concept of the "Bekas" arms line underwent certain changes. 2001 was marked by the appearance of the multiple-shot gun "Bekas-12 M", designed for ammunition of the 12th caliber. This is a classic pump shotgun with manual recharging, which is carried out by sliding moving mobile forearm along the tube of the magazine.

Among those who are seriously fond of hunting, there is an opinion that the 16-gauge cartridge does not have enough power, why the versatility of its use is limited. And although the model successfully disproved this stereotype with its indicators, such as low returns, good accuracy and good range, nevertheless, the production of 16-caliber shotguns was stopped, and today the plant produces only 12 m Bekas guns.

Pros & Benefits

Pump rifle "Bekas" has a number of advantages. The model is made qualitatively, differs reliability and durability. Shotgun "Snipe" works with any type of charge, it comes up with a shot, and a bullet and a buckshot. This weapon is not afraid of various temperature differences, it does not fear either an excess of moisture, or suffocating heat. The range of extreme temperature conditions reaches the limits from -30 to +50 ° C. There is something else important, which can not be ignored, is that the main units and elements of the gun are interchangeable in the assembly-transformer type.

Of course, the Vyatka-Polansky machine-building plant with the powerful name "Molot" produces hunting rifles of the "Bekas" family, which are highly unpretentious, but do not forget that in any case, the rules for caring for them must be observed. Absolutely any weapon requires careful handling, good conditions of preservation, compliance with transportation rules and, of course, requires regular lubrication.

What's in the minus

Reading the information on the rifle "Bekas-12 M", reviews from avid hunting enthusiasts, which they share from their practice, we can conclude that, like any weapon, the "Bekas" line has some flaws in production. For example, a loud sound from the cocking and recharging, is, by the way, the lack of all automatic and pomp guns. In addition, there is a lack of ergonomic replaceable pistol grip, as well as the fact that any shotgun "Bekas" is too heavy for a "take off" shot. Dimensions, too, could be attributed to minuses, but the fact that this family of guns can be transported in a compact form allows you not to. You can also add here that the butt is not designed literally under any of the hunter's complexion.

Properties and characteristics

According to the design parameters, all the weapons of the "Snipe" line are presented in the form of that there are classical pump-shot shotguns with manual recharging. And only "Becas-12 M" (auto) is an exception due to another scheme of recharging, in which the bolt is withdrawn due to the propellant gases automatically.

The main characteristics of the rifles of the "Bekas" family include the following:

1. A large reserve of resources (up to 10 thousand shots).

2. Smooth trunk without any cuts.

3. Excellent reliable safety system against accidental shot.

4. Possibility to use various ammunition (bullets, shot, buckshot).

5. The material from which the receiver is made is a high-strength aluminum alloy.

6. Availability of interchangeable components.

7. The top of the rifle box and the butt are made of wood, as a result of which the gun gets a useful weight for stabilizing the position at the sight and shots. By the way, as the next modification step, the Vyatka-Polyanskiy machine-building plant has outlined the replacement of wood for plastic.

8. The rifle is equipped with a useful device - the cartridge chopper. Due to this device, if necessary, the replacement of one cartridge on another is carried out quickly and easily.

Price range

It is believed that the guns produced in the West are better and more reliable. But at such a cost, where the minimum line begins from 42-45 thousand, not every hunter could afford such an acquisition. The family "Bekas" has become a good alternative to quality. For example, the pump gun "Bekas-12 M" price is in the range of 12 thousand to 24 thousand rubles. The price variation depends on where you are going to buy the model, from which dealer, plus / minus the cost of shipping. And this despite the fact that the model "Bekas-12 M" characteristics are not worse than many Western analogues. Judge for yourself, here is a short list of technical descriptions:

1. Caliber - 12.
2. The cartridge is 12x70.
3. The chamber is 70 mm long.
4. Shop with a capacity of 6 rounds.
5. The weight of the product is 3.6 kg.
6. The total length from the trunk to the handle is 535 mm.
7. Dimensions - 844x50x140

Disassembly of the gun for cleaning

Cleaning weapons can be divided into 2 types: incomplete and complete. Incomplete it is necessary to spend after each hunt, immediately after its termination. A complete - at the end of the hunting season, as well as after unforeseen accidental circumstances, such as the fall of a gun in the water or getting wet under a heavy downpour. Incomplete cleaning is quite simple. For its implementation, you need a knockout and a key. Most importantly: do not be too lazy to refresh your memory by reading the instructions and make sure that the rifle is discharged. Then remove the barrel, magazine and shock-trigger mechanism (USM).

A simple description of the disassembly in the instructions is enough to even a novice could handle. With each detail, remove the powder deposit. For complete dismantling of the gun "Bekas-12 M" will need not only a key with a knockout, but still an extra and a slotted screwdriver. Remove all removed parts after cleaning. KSM is not necessary to disassemble, it is a responsible mechanism for the product, and without special need it is better not to touch it. It is enough just to clean it with a brush of debris and lubricate it sometimes.

More on interchangeable components

As already mentioned in the characteristics above, the modular principle is applied in the construction of the pump gun "Bekas". This means that the main nodes can be combined, making up various configurations, as if in a children's designer "Lego". Consider the composition of interchangeable components on the model "Becas-RP-12 M":

1. Butt.
2. Handle of pistol type.
3. Four different in length trunk for ammunition 12x70 and 12x76.

"Snipe" -automaton

Among the latest versions of this weapon series was a modernized "Becas" automatic, in which manual reloading of the pump type was replaced by an automatic one. Actually, in the sample itself, no special changes have been made, except for the above-mentioned automatic recharging.

How it works

Immediately after the shot is fired, the hunter pulls the hand for himself, this action opens the bolt. The cartridge of the shot cartridge jumps out through a special hole located on the receiver. Simultaneously, the feeder hooks the next new cartridge and produces a platoon platoon.

During the movement of the forearm to its original position, it catches the feeder and the cartridge is refined into the chamber. The bolt is locked. When the cartridges come to an end, the bolt is fixed in the extreme rear position. To output it from there, you will need to press the shutter delay button.

The construction of a new rifle "Bekas-12 M" (pump, car)

The USM is created by the hammer type. There is a fuse, which is activated by pressing the button in the base of the trigger guard. Two types of long trunks, length 20 mm and 750 mm. A sight is a standard rod. Short trunks - 535 mm and 630, aiming through the target and fly.

A long trunk with a constant muzzle constriction is usually used for hunting various animals. Short trunks are designed primarily for civilian self-defense, since in this version it is much easier to aim and shoot. Short-barre limited versions of 12M-S are produced for power structures.

Convenient improvements

1. Weight reduction due to the production of the receiver from a durable and very high-quality aluminum alloy.
2. Cevier, handle and butt are made of Turkish walnut. This strong and reliable natural material is often used in weapons production.
3. To reduce the impact of recoil, the butt was perfected by adding a special rubber insert.
4. The receiver has four regular grooves. They are located two on both sides and serve to fix the bracket for optics.

Reviews of experienced hunters

In terms of its external indicators, the weapon looks good, and only the presence of some minor flaws keeps owners from exhibiting a higher rating. The question is that sometimes it is not easy to stand up forearm, there is a slight backlash, so I would like a better fit for the butt to the receiver. Good blasting of the trunk, there are no complaints, but the owners of the weapon believe that it would be great if the receiver had the same. Applied almost everyone likes, although the weight distribution is satisfactory.

At first, you will have to get used to arms, especially if before that you were the owner of a variant of a completely different type. But the process of getting used to it is very fast. A little longer will distract a long trunk, but you can get used to it.

About cartridges

The quality of the choice of ammunition should always be approached very responsibly, since if any inconsistency appears in the form of a cartridge case, this can lead to a lamentable result - the failure of the weapon. When using factory cartridges, the automation does not cause any complaints, most of the opinions agreed on the fact that the automation of the "Bekas" is completely reliable.

The battle is excellent, the recoil is not very high, and besides the sharpness of the shotgun's combat is positively affected by the automatically controlled gas outlet and the cutoff of the powder gases. Cartridges with a sample of 32-36 grams are suitable. It is not recommended to use a half-magnum, although some experts believe that the powder gases in these munitions do not develop pressure in the trunks that exceeds the permissible limits. And, perhaps, it is, but, most likely, their use will significantly shorten the lifespan of "Snipe".

Conclusion (according to most owners)

The line of pump shotguns "Bekas" is a worthy product from the domestic weapons manufacturer. With excellent characteristics and quality, depending on the configuration of the "Bekas-12 M" model, the price for today is in the range of 12-25 thousand rubles. Thanks to research and experiments, the weapons family "Bekas" has proved worthy and proved itself in practically all kinds of hunting. Duck, hare, goose, even boar - everything is available, you just need to pick up a cartridge.

The weapon has a simple design and does not present a complexity in operation, because of what exactly it is recommended to beginning hunters in the form of the first serious acquisition.