Pike fishing in August: secrets and techniques

Experienced fishermen know that a hot summer is not the best time to fish for a pike, which can not be said about August. This last month opens the season for a different, more adventurous hunting for a toothy predator. August is characterized by a gradual cooling of the water. At this time, the activity of the pike is growing, which means that it's time to gather for fishing.

This predator loves a cool place in the reservoirs, so it is best to catch them in the lowlands of rivers or in small thickets hidden from the sun. In August, anglers may well count on a good catch, if, of course, correctly pick up a place and bait.

Secrets of Fishing

It is important to consider that in the last summer month this underwater inhabitant is still characterized by passivity. Therefore, to catch it, the fisherman will not only have to explore large areas in the pond, but also experiment with both lures and ways of performing the wiring.

Catching pike in August has its own characteristics, which is important to consider. The main difficulty of this fishing is warm water. It is too high a temperature that causes this predator to leave the coastal zone and small bays where it is known to feed. In summer, pike always keeps those areas where the depth exceeds two meters.

In a strong heat, toothy prey almost always ignores the bait that is passing by. This is what makes pike fishing more difficult in August. It is also important to know that at this time this fish does not swallow the bait, as it does in the spring or autumn, but only gnaws slightly. Therefore, pike fishing in August should not take place using wiring at high speed: the object, even reacting to the bait, is unlikely to be detected.

Fishing on the lakes

This predator, furiously chasing the fry, often gives himself away as a fish, which from her attack jumps out and runs around. Usually pike fishing on the lake in August takes place in quiet places: wrecks, backwaters and whirlpools. A good specimen can be pulled out on the border of vegetation or in zakaryazhenyh pits. Large pikes prefer a depth of four meters in lakes with clear water and plenty of underwater thickets. The bottom folds and drops of depth are also catchable. An excellent specimen of pike can be pulled out in August and from the slopes of the pits opposite to the current. It is here, according to experienced fishermen, and the best pike fishing takes place in August.

On small rivers

There are very few reasons that will cause this predator to leave his place of violence. In small rivers, the pike strictly controls its section of the reservoir under control and does not let competitors in. She can leave it only in the event that the feed finishes or the water level drops considerably. That's why it's almost impossible to get two trophy copies from one place.

First of all, pike fishing on the river in August should take place in places where there are strong drops of depth. To search for this predator is necessary at the exits from the channel depressions.

But if pike fishing in August passes in a deep riverbed, the probability of catching several fish at once increases much.

Than to catch

Best in this case in the last summer months are jig baits. They are particularly well proven when catching large specimens, which you need to look for near the bottom.

Most anglers mistakenly believe that with a large bait the chances of getting captured trophy increase. According to the long experience of the pikes, the best catch is the result of the use of medium sized bait. It has long been known that the use of large or, conversely, small baits leads to the opposite result: they come across small specimens, the weight of which does not exceed three kilograms.

Tackle

The August choice of "pike" gear is very diverse. At the beginning of the month, the predator still takes the bait not quite willingly. At this time, gatherings are not uncommon. Fish in the first days mostly on a small fish, using jerboats, donkeys, mugs, fishing rod, peretet, etc. As bait, roach, karasiki or minnows are used.

Another thing is the pike fishing in late August. In the second half of the last summer month in this predator waking feelings awaken. For fish, the cooling of the water is a signal that the winter is already around the corner and you need to eat hard. At this time, it is best to use spinning. Not bad itself has recommended and jigovaja fishing of a pike in August on zhivtsa. At the spinning, you can catch quite decent specimens at this time, reaching to seven or ten kilograms. The rigging also uses wobblers and large spoons.

Features of fishing for spinning

The length of the rod should be selected depending on the place from which pike fishing occurs in August - from the shore or from the boat. In any case, the fisherman needs to be approached very close to the location of production, especially since the extraction is not from shy ones. Coastal fishing of pike in August for spinning is ideal with a rod in two hundred and seventy centimeters. For fishing from the boat, the fisherman will be only about two meters.

The spinning test will depend on the baits used. Wobblers that do not have a large mass, assume a weight ranging from five to twenty grams. For jig and for massive spinnerets, spinning is best suited, the test of which is up to forty grams.

The styling of the rod when fishing with the wobblers should be fast or medium, when catching a shiny, on the contrary, slow. The secret is to give the bait smooth movements or, on the contrary, in a more jerky wiring.

Coil and brake

This part of the rig does not involve any excesses during the August fishing of the pike. The most important thing is to choose the friction brake. As for the coil, it should only have a smooth running and allow winding from fifty to seventy meters of 0.25-gauge line. Shmuli with the size of a thousand five hundred to two and a half thousand will be the ideal solution.

Correctly selected line

In August, fishermen use braids for jigging, and for all other methods a good quality monofilament will do. The braided line, practically not stretched during the wiring, helps to get the most accurate picture of the location of the bait. For trolling or wobbling, this characteristic is less critical. Nevertheless, the quality of the line should nevertheless be approached carefully, since it is a question of the pike.

Lure trolling

The wavering version of this bait is a favorite option for seasoned anglers, as it largely corresponds to the physiological characteristics of this predator. If there is a pike in the pond that is kept at a depth - it always pecks at a ripple. This fish is well caught on large, possessing low-frequency and high-amplitude bait playing. That's why the wobble is ideal for pike.

Fishing with a wobblers

In places where it is small enough and there is a lot of vegetation, a rapidly sinking wavering bait shows itself not well enough. In this case, the most productive will be the pike fishing in August for the wobblers. This bait has a wide variety of shapes and sizes of penetration. In addition, there are three of its varieties, classified by buoyancy: it is a pop-up, a suspender and a sinking. Among the experienced "pikes" the first two variants are most popular, as the latter is easily replaced by a jig or jig.

Features of choosing the right bait

Even a small individual more willingly attacks a large bait. As for trophy specimens, the pike fishing in August involves the use of wobblers with a size of twelve centimeters and more. Jig baits show better during fishing and will be well shown in October and November, as well as in March or April. Twisters or vibro tails due to their large size and variability in the choice of colors are the most popular for deep-sea pike fishing in early spring or autumn.

Rotary or spinning spoon- baits work well on an active pike. But when the predator is passive, she likes the weakly moving, imitating sick fish, the wobbler-suspender. Spinnerbate, or bait-beam, is used both for zhore, and with reluctant slander. He has an effect immediately on several senses of the fish, literally forcing her to launch an attack.

Methods of catching

In order for pike fishing to be productive in August, the fisherman needs to know the specifics of the production behavior in this season. And, based on them, to apply the right methods and methods. In overgrown reservoirs, the behavior of this toothy predator is more predictable than in rivers. Noticing the splash or the breaker after the scared fish, it is necessary, stopping the boat, raise the oars and wait only a few minutes. After that, you need to start fishing the water area with a radius of three to five meters, because the fearless predator never goes far.

The grip of the pike is sharp and powerful. Its teeth are located inwardly with sharp ends, so the prey practically does not break out. The sky of this fish is quite tough, so do not rush it with hacking: let it take a step away and deeply swallow the live bait. The pike is paralyzed at first. Using this, you should drag it as quickly as possible. Otherwise, the young prey flies out of the water, makes "candles", "rides on the tail", vigorously shakes his mouth. Not very sharp hook will not be able to hold the pike. Large specimens, on the contrary, try to free themselves, by powerful pulls leaving to the depth.

Tips from experienced anglers

Some use a winter spoon and a large float. A piece of bread is put on the hook. Casting is carried out as with a standard float fishing rod. The bait must be left still. Gathered around the spoon-bait, small fryers graze bread, thereby attracting a predator. As soon as the fisherman notices that they are rushing to the sides, he must start stirring the bait. After that, in most cases, a bite comes. At the same time, there should be as few elements as possible between the main line and the shiny one. In this case, the pike more boldly and gambitless enough lure.

The color of the spoon-bait is also of great importance. On cloudy days it should be white, and in sunny - yellow. Another trick: after casting, it is necessary to penetrate the bottom of the shiny, then raise it and continue wiring with twitches.