"MaxForte-ECOPLITA": description, technical characteristics, composition and installation features

In order to create coziness and comfort inside the premises of your home, it is necessary to insulate the dwelling, but for this it is important to choose the right material. For example, "MaxForte-ECOplita" is a sound-absorbing material that is used for noise insulation of apartments and houses, as well as premises for different purposes. It can be cinemas, music studios and recording studios. The material belongs to the class of sound absorption "A", it has excellent acoustic characteristics.

Composition and GOST

"MaxForte-Ecoplita" is manufactured according to state standards 27296-87, which guarantees its unsurpassed quality. The material is made of volcanic rock, and in the process of production impurities, slags and blast waste are not used. Sound insulation is tested in NIISF, while it demonstrates the maximum sound-absorbing properties at different frequencies. Plates comply with sanitary norms and regulations of 23.03.2003.

Description

The soundproofing described is used in the apartment and is laid under the screed, as well as on the logs and the wooden floor, acts as a noise insulation when there is a need to lay the material in walls and interior partitions.

Among other things, "MaxForte-ECOplit" can be laid under a stretch ceiling, not only residential, but also industrial, as well as office space. If we consider additional features, then we can distinguish that this sound insulation has an insignificant level of thermal conductivity, and this allows us to use it as a heater.

The material can be operated at a rather wide temperature range, which varies from -260 to +750 ° C. The material is environmentally friendly, it does not contain volatile resins and phenol-formaldehyde. If you need to protect your home from shock noises and air noise, then such isolation will prove to be the best.

The optimum density, which is suitable for noise insulation of walls and ceilings, is 60 kg / m ³ . As for the insulation of the ceiling, it is best to use slabs with a density of 110 kg / m ³ . On sale, you can also find a variant with a density of 80 kg / m ³ , you can use it for the ceiling, walls, as well as the floor.

Hygroscopicity

"MaxForte-ECOPLITA" is resistant to penetration of moisture, as well as the emergence of fungus and mold. On the surface, favorable conditions for rodents and insects are not created. This soundproofing is chosen also because it is distinguished by high fire resistance, does not burn, has a long service life and is easy to install.

Specifications

"MaxForte-ECOplita" is popular with consumers for the reason that it refers to the highest possible class of sound absorption. The noise reduction factor for slabs with a thickness of 30 and 50 millimeters is 0.92 and 0.95, respectively.

The length and width of the slab are equivalent to 1 and 0.6 meters. Perhaps you will be interested in the volume of plates of different density. The manufacturer produces soundproofing with a density of 60, 80 and 110 kg / m ³ , for each of these values the volume is 0.12; 0.09; 0.09 m ^3, respectively.

"MaxForte-ECOplita", the composition of which was mentioned above, has a different packing area depending on the density. If we consider the last value in the above sequence, then the packing area in the first case will be 2.4; While for the last two values it is equal to 3 m ² . Sometimes the weight of the package is also of interest to consumers. For density 60, 80 and 110 kg / m ^3, these values are 7; 7.2, and 10 kg, respectively.

Cost

In one package contains 5 canvases, and the cost per square meter of slabs taking into account the density of 60 kg / m ³ is 300 rubles. If the area increases to 80 and 110, then the price will be 420 rubles.

Mounting Features

If you want to buy an analogue of "MaxForte-ECOplit", then you should pay attention to the products of the brands "Soundproof", as well as "Thermo sound". Consumers also found widespread use of "Shumanet" and "Softboard."

When using "Ecoplita" it is necessary to be guided by a certain technology, which provides for the first stage to inspect walls for cracks and defects. If these can not be found, then the surface must be taped to find possible voids. The found cracks should be sealed with a cement-sand mortar, and where cavities were found, it is necessary to break the wall a little and open access to emptiness to fill it with a cement-sand mixture. There should be no crevices in the joints between the slabs of the wall.

How is the installation carried out? "MaxForte-ECOplita" does not fit right away. The next step is to disclose the roll insulation of the same manufacturer, but the brand "Standard". Rolls are fixed with a soft side to the wall, during which it is necessary to use plastic anchor plugs. Cloths are laid with an overlap of 5 cm. The joints obtained are coated with one-component rubber or sealed with reinforced mounting tape. In the course of this, the material should be placed on adjacent surfaces, be it ceiling, floor or walls. The size of the approach should be 10 cm.

The next step is to install the frame on an isolated surface. The optimum distance between the posts should be 600 mm. It is important to eliminate the rigid abutment of the frame elements to the ceiling or floor. Under the guiding profiles, a gasket is laid from the strip of foamed polyethylene or felt.

Instead of fixing the metal frame to the walls, it is recommended to use the fixation to the ceiling or the floor, while using anchor fasteners through the rails. "MaxForte-ECOplita", reviews about which are mostly positive, fit into the next stage. It is necessary to cover the material in the space between the racks of the metal frame. Next, a gypsum fiber sheet casing is installed, the thickness of which can vary from 10 to 12.5 mm.

The main disadvantages

"MaxForte-ECOplita", the shortcomings of which can appear during the installation, sometimes requires the installation of a frame. In this case, if the insulation is carried out inside the premises, you can note the decrease in free space, which is critical for small apartments. Among other things, the installation of the framework requires some knowledge and skills that not always have the owners of housing.

Conclusion

After considering all the advantages and disadvantages of Ecoplita, you can say with confidence that this material has more pluses, which is why it can be purchased as a sound absorber for home or office. With even walls, it is completely possible to install it without a frame, which will be in the hands of the home master.