Every woman ever had a situation when her fingernails were broken. If the breakdown is not too significant, then the nail can be filed in the place where it broke and wait for another visit to the beauty salon. But there are situations when the nail falls off completely, from the entire nail plate. There is nothing to help, especially if the build is made with an exclusive multi-colored design, like, for example, these exaggerated nails, the pictures of which you see in the article. No matter how sorry the other marigolds, but if you can not visit the beauty salon in the near future, the only way out is to remove the artificial nails yourself and make a regular manicure.
There are several options for how to take off the extended nails. It depends on what kind of material the building was made.
If the nails are decorated with gel, you will have to cut off the surface of the nail, because, unfortunately, there are no solvents for this material. To reduce the area of cutting and avoid injury, you must first bite off all the protruding parts of manicure nippers. Further, according to the instructions on how to remove the advanced nails gel, you should take an abrasive file for artificial nails on polyurethane foam and start the process of filing, the nail behind the nail. If there is a professional machine, this will greatly speed up the process. To avoid filing your own nail, you need to carefully monitor when the gel ends. If you overdo and sip your own nail, then it will be very painful.
The technology of how to remove nails made from acrylic is somewhat simpler. To remove these nails, there are various liquids that acrylic dissolve. But at home, you can use a liquid to remove the varnish with acetone, and the usual solvent. It is worth remembering that these drugs dries out the skin around the nail and the nail plate itself. The sequence of how to remove advanced fingernails with the help of liquid or solvent is the following. From a usual foil it is necessary to prepare ten sheets of this size so that they can be wrapped around each finger and wrap the part located on the side of the nail. Also, you need ten wadded disks or cotton swabs. Wet cotton in a liquid or in a solvent and put it on the nail, from the top for sealing we wrap the nail in foil. Repeat the procedure with each finger and leave in this state for 30-40 minutes. In less time, acrylic will not soften. Then remove the foil from the first finger and clean the acrylic mass with something hard. In the same way we process the remaining fingers. It is important to remove the foil and immediately start cleaning, since in the open air acrylic can harden again. Finally, the residual acrylic is removed by liquid or solvent.
There is still a variant of how to remove the advanced nails biogel. The procedure is the same as for acrylic, only a special liquid is needed, which can not be replaced.
All variants severely injure nails, and until they grow back, they need to be maintained by courtship.