How to properly glue wallpaper non-woven

Wallpaper - an integral part of the appearance of our homes. Appearing in immemorial times, they served purely practical purposes: they collected fat and soot from candle lighting, and also concealed defects and cracks on the roughly finished walls of ancient castles. Without wallpaper they simply shamelessly sketched, which did not have a very positive impact on the health of the people who lived there. However, in our time this is a purely decorative element of our dwellings, without which it is practically impossible to imagine a modern house. Since it is not easy to properly glue wallpaper non-woven, beginners often avoid them, but in vain.

That's why we do not have to be surprised at the fact that with the terrible word "repair" many people face the kilometers of wallpaper that need to be glued. However, many do not attach importance to their correct gluing, as a result of which the glazed room looks is not very attractive. In order to paste wallpaper and as a result to get a cozy and ennobled room, it is important to follow several rules. In a word, we will understand how to properly glue wallpaper non-woven!

Immediately warn: it is important to read the instructions that are attached to each roll. Our people still did not say goodbye to the bad habit: they believe that all the wallpapers are the same, and therefore "bother" with some instructions there is not needed. As a result, expensive wallpaper falls off layers, leaving hapless "experts" with mixed feelings and devastated wallets.

When we glue wallpaper on a non-woven basis, the quality of the glue is very important. With the type of glue and its manufacturer, it is better to decide in advance. Modern industry produces paper, vinyl, textile, non-woven, glass, and therefore there are hundreds of types of adhesives.

It is necessary to choose glue under a type of wall-paper, and it should be fresh. It is inadmissible to make it "in reserve" or use the remaining reserves from past repair, since their adhesive capacity is often not higher than that of water. Take into account that the adhesive for non-woven wallpaper (the price of which is very significant) should be quite thick.

Before gluing it is important to over-reinforce the walls to better fix the glue to the wall. In addition, the primer covers small wall defects. So, armed with a container for mixing glue and some of its stock, we begin kneading. Do not hurry, pour the glue into the pre-measured volume of water, carefully stirring the lumps. Next, we determine on the wall the vertical level of gluing the first strip: in the future, the strips are glued to its level. Note that it is not necessary to glue the wallpaper "at the butt", as they will expand and contract with time. Since it is quite difficult to properly glue wallpaper non-woven, do not do it in proud solitude.

Cut off the stripes with a margin of 5-7 cm on the unevenness of the wall, be sure to consider rapport (observance of the figure). After that, grease the canvas with glue and fold it in half. It is important not to overexpose it in this position, as paper wallpaper can quickly gain moisture and break when pasted. After the canvas is attached to the wall, with gentle movements of the hard brush, we smooth the canvas from the center to the periphery. Remove excess glue with a clean dry cloth. The height of the fabric on the ceiling and the floor is adjustable after it dries. A necessary condition for successful sticking is the lack of draft.

We hope, we have helped you with advice in how to properly glue wallpaper non-woven!