How to make a frog from a plastic bottle is easy and simple?

Fans of various kinds of non-standard crafts probably wonder how to make a frog from a plastic bottle on its own. Usually it is either a figurine that will decorate the yard or cottage area, or a casket. There are other options for creating such hand-made articles, but they are much more complicated. Therefore, we will not focus on them, but focus on what is most simple and easy. It is these two options that are relevant to this.

Raw materials and tools

So, how to make a frog from a plastic bottle? First you need to ensure that all the necessary tools and materials are at hand. First, you will definitely need two plastic containers with a capacity of 2 liters. It is better if they are green. If there are none, then others can be covered with paint. You will need Scotch tape. Also at hand should be a scissors or a knife, a green insulating tape, a marker and a ruler. When creating the casket, a lightning is added to this list, which will close it, paper applications in the form of large eyes. For the statuette, you need three more containers with a capacity of 0.5 liters and a substrate. Also, the eyes in this list will not be superfluous.

Figurine for the yard

Usually such an article is called a "princess-frog from a plastic bottle". This name very accurately characterizes it. It really reminds everyone of the famous fairy-tale hero, who is located at your place on the playground or in the garden. The algorithm of its manufacturing is as follows. At the first stage, the bottom of each of the 2-liter tanks is cut off. The distance from the bottom should be 7-8 cm. At the cut location they are applied to each other. It is imperative that the teeth from the lower and upper parts are facing each other. All this is wrapped in scotch tape. On the two front legs are glued appliqués in the form of eyes.

From one half-liter capacity is cut out the crown. You can use for this as a conical part of it, and straight - at the discretion of the author. All this is pasted from above by means of an adhesive tape. If desired, you can first cover it with yellow (for plausibility).

Then the remaining 2 containers are used. They cut out the conical part between the lid and the straight section. From above it is wrapped with a green insulating tape. Further the basis is made out. It is best to make it from a sheet of metal, paint it with blue paint and add a green spot, for example (a leaf of a lily). In the middle of the latter is placed the statuette itself, made in advance. To the left and to the right of it is established conical pruning - these are the paws, which are located at the edges. This is done on liquid paint (in this case it plays the role of glue). After all has dried up, the hack is ready. This is the first way how to make a frog from a plastic bottle is over.

Casket

The initial two components in this method are similar - these are the two lower parts of 2-liter containers. Inside the lightning is installed and it is fixed with a thin wire, on top of which an insulating tape is wound. Then glue the eyes (not necessarily on the legs, as in the previous case). Then we check the lightning with the help of closing and opening. All - the casket is ready, and we considered another way of how to make a frog from a plastic bottle. It is very simple and well suited for our women of fashion. In such a box you can store various jewelry and other jewelry.

Conclusion

It is very easy to make a frog from a plastic bottle. Her photo is given in the article. It is important to understand one thing: in this material the two most common ways of creating such an article are indicated, based on which (and supplementing them with your imagination), you can get something special.