How to flash the "Android" through the "Recovery"? Instructions

Today, in the world of modern technology, a huge role in our lives is occupied by smartphones. It is already difficult to imagine how people did not use telephones a few decades ago. Not even modern smartphones, in which there are a huge number of useful functions, and simple phones to just call. Of course, the new devices are not surprising, they have become a necessity.

Unfortunately, smartphones can break at any time, do not even fall and crash, but simply pick up the virus and stop turning on. What to do in this situation? If the phone does not turn on or hang up, then it must be reflashed. Let's look at how to flash the "Android" through the "Recovery".

Troubleshooting. What should I do if my phone does not turn on or hang?

It does not matter if you have a new Samsung device or an old phone from a Chinese company, they can start hanging up at any time or stop switching on at all. Before flashing your device, you should try to reset the smartphone to factory settings. Of course, this can only help if you have a memory hole or a software crash. How to do it? Go to the settings, go to the tab "Restore and reset" (perhaps you have it called differently) and click on the "Reset to factory settings" button. After that, your smartphone will clear all memory and reboot.

If this does not help, then it's worth trying to install a new firmware. With what it can be connected? As a rule, various phone failures cause viruses that can not be cleaned by simply resetting the settings. Malicious files crawl into system files that are not cleaned when the system is restored. The new firmware contains other files in which there will be no viruses. If you do everything right, then get rid of viruses and problems associated with them. First you need to consider how to flash the "Android" through the "Recovery".

What is the "Recovery"?

It is quite easy to flash a phone, so do not immediately run to a service center for troubleshooting. So you can save a lot of money. Re-flashing the device will cost you 500-1000 rubles. How to flash the "Android" from the flash drive through the "Recovery"? Before we consider this, it is necessary to understand what the "Recovery" is. This software, with which you can return your smartphone to the factory settings or reinstall the system. It is contained in all devices running Android OS. If you did not install additional files, then you will have a simple "Recovery", which is enough to put the firmware. If you want to install the converted software, you will need to install a custom Recovery.

How to flash the "Android" through the "Recovery"? Menu

Before installing the new software you need to enter the "Recovery". It resembles the BIOS that is present on an ordinary computer. To learn how to flash the "Android" through the "Recovery", you need to enter the menu of our software. How to do it? First, turn off our smartphone. To enter the desired mode, you need to press the "Volume +" button, the "Home" button and after a few seconds the power button. Perhaps you will not be able to enter this way, because for the entrance to the "Recovery" there are various combinations (the most common method is described in the article).

What else is needed?

Before you move on to installing a new firmware, you need to rummage around the Internet and find the right version. As a rule, they are not on official websites, so many users create backup copies, which they subsequently reset to their device or spread for other users. Find the firmware can be on special sites, the most popular - 4pda. Perhaps you are an advanced user, and you are already tired of the usual firmware. It is for such people make some changes to the standard set. To install the converted firmware, you need to install a custom Recovery.

How to flash the "Android" through the "Recovery"? Instructions

You should understand that you are re-installing the device at your own peril and risk. If something goes wrong, then you will not be able to fix the phone under warranty. Of course, if you firmly decide to reflash your smartphone, you need to find the right firmware.
The installation process is pretty primitive. First, download the appropriate software and move it to the device memory or memory card. Then go to the "Recovery" and select the item Apply update from external storage. You must confirm your actions to start the installation.

As soon as the flashing ends, you need to click on the Wipe data / factory reset button. This will clear all information about the old software.
At the last step, you just need to click the Reboot system now button . Your device will start to boot with a new firmware. That's all. How to flash the "Android" through the "Recovery"? Now you can also answer this question. There is nothing complicated, only a little time and care.

How to restore old software?

Perhaps you installed a custom firmware version, and you did not like it. How now to return everything to its place? Unfortunately, there is no button that could just return the old settings. To return the firmware, you must reinstall the software on your device. You download the usual firmware that fits under it, and install it through the "Recovery".

Conclusion

How can I flash an Android phone through the "Recovery"? As you have already noticed, there is nothing complicated in the flashing of the device. The main thing is to follow the recommendations. Within an hour you will receive an updated phone that will work fine.