How to connect two computers to a network

Setting up an access point and a router often becomes a serious problem for novice users. According to the manufacturers themselves, setting up a wireless network is a simple matter. In fact, everything is much more complicated, and can introduce into even a small confusion even experienced users. Let's try to figure out how to connect two computers to a network, select an access point, etc. Many are so far from this issue that even the presence of a network causes them positive emotions, not to mention its quality. But we can make this connection reliable, so we believe that you should also know this little secret.

It often happens that the main stumbling block is the Wi-Fi standard, which prevents the transmission of multimedia. Only compliance with the 802.11n standard can provide the highest speed when transferring files and viewing HD video. The transmission speed when connecting to this standard is 300 Mbps. If there is no need for such a speed, then it is better to choose a network according to the 802.11g standard, which provides a speed of up to 54 Mbit / s. It will be enough for an Internet connection of high speed.

Strangely enough, but one, and two, and the third network standard Wi-Fi is at a frequency of 2.4 GHz. Setting up a Wi-Fi network due to this is slightly simplified. But there are other problems. In view of the fact that most microwave ovens, radiotelephones and wireless interface extenders operate at the same frequency, the noise level increases many times. There is another problem that is related to the environment in which this signal passes - and this is nothing more than structural elements. It may even be the person himself. The router should be located in such a place that other objects do not interfere with data transmission. It is not enough to know how to connect two computers to a network, but it is important to know how to make an optimal environment for data transfer between them.

To connect the router and the computer you need to use a special cable. In order not to perform unnecessary work in the future, make sure that the connection is established and the computer detects the router. You can make a mistake in choosing the right entrance and exit, so if there is no connection, then do not hesitate to recheck this fact. The main document that you should rely on when setting up a Wi-Fi router after connecting to your computer or laptop is the manual. There are clearly prescribed all the addresses that are worth entering.

The next step will be the introduction of data, namely the login and password. The instructions on this issue do not indicate anything, just as with how to connect two computers to a network, but this is normal. Many standard routers use admin / admin or admin / password pairs. If you cook them, then maybe you will get something.

In order to spread over the Internet, you need to use the Internet cable and connect it to the external interface on the router. Then, in the router settings, specify the provider interface settings that are in the contract. If you do not have one, you need to contact support. You do not need to ask how to connect two computers to a network. These questions will not be answered to you, but it's worth to clarify on the matter.

Setting up a network between two computers is much easier than you think. Just connect the cables, and voila! Using Wi-Fi, too, everything is done quite simply - you need to create a network on one of the devices, and connect to it from the other. Data transfer in the second case is slower, but if you need to connect computers at a greater distance - then this is the only way out. The main thing is not to be afraid of spoiling something. Try, connect, decide, and you will succeed! And if not, then for this there is a "Reset" button on the back of the router.