How to clean an iron: grandmother's recipes

Alas, even the most modern models of irons, which can be seen in the stores of household appliances, are subject to such adversity as carbon deposits. It would seem that this is so? But in fact, carbon deposits can cause your favorite things to deteriorate: get dirty and even burn through. Agree, not too pleasant prospect. That's why it will be useful for you to know how to clean the iron at home.

Option number 1. Salt

Salt is the simplest and most affordable means for cleaning the soleplate of an iron, because it will be found in every house. It can be used in several ways. The first is to pour salt on a thick sheet of paper. Then it is necessary to heat the iron and drive it on the sheet until the deposit is completely gone. Another option is to collect a little salt in gauze or another porous soft cloth and then rub it with a dirty place. An even greater effect can be obtained if the iron is preheated a little beforehand. You can put salt directly on the soleplate of the iron. In this case, you need to rub it hard with a rough, slightly damp cloth. When the deposit falls, it is necessary to treat the iron with a dry rag. However, it should be remembered that this method will help to eliminate only minor impurities. And still the use of salt is not suitable for irons with Teflon coating.

Option number 2. Vinegar

How to clean the iron, if you can not use salt? There is one more remedy available in every home. This is vinegar. If the plaque is insignificant, it will be enough just to moisten with a vinegar a rag or cotton swab, and then rub "place X". If the contamination does not give way, try mixing the vinegar with ammonia. A similar composition can only be cleaned with a cold iron. If this also does not help, place the appliance on a rag soaked in vinegar, and do not touch it until morning. For such a time, the raid should soften. To finally get rid of it, it will be enough to rub the sole with a rough cloth vigorously. But this is not yet a complete list of what to clean the iron.

Option number 3. Paraffin candle

You will need, in fact, a paraffin candle itself, as well as a dense cotton fabric. The candle is wrapped in a rag, and then we begin to wipe it with an iron, which before that must be preheated. Consider that the paraffin will melt from the high temperature. Therefore, perform all manipulations with the iron in a special tray, keeping the device tilted. This is especially important for irons equipped with a function of steam - hammered in the holes, paraffin can ruin your things. After the cleaning is finished, you need to remove the wax residue and dirt from the sole.

Option number 4. Indelible pencil

A special chemical pencil can now be bought in many stores. This is one of the best tools that quickly solve the problem called "How to clean the iron?". First of all, warm your unit well. Then you need to rub the base with a pencil. After a while, a chemical reaction will occur. The plaque will soften as a result, and it can be removed with a soft dry cloth. When the device cools, wipe the sole with a slightly damp cloth. Do not be frightened by an unpleasant smell - it is formed because of the presence of liquid ammonia in the pencil. The substances released during the reaction are completely safe for humans.

Option number 5. Hydrogen peroxide

The last remedy of the category "What to clean the soleplate of an iron?", Which is worth mentioning - hydrogen peroxide. It is enough just to moisten a piece of cotton wool and rub it with the surface of the iron. If the contamination is very severe, you can take a nail polish remover or acetone. But you need to work with them very carefully, because both tools can damage the plastic elements of the device.

As to which sole of the iron is better in terms of cleaning, then the landlady has been preference for many years for those that are made of stainless steel. They are much stronger than ceramic or aluminum, and the carbon deposits away from them faster.