How to choose and install the corners for the bathroom?

Are you worried about water getting between the bathroom and the wall? If you do not do anything for a long time, unwanted "guests" can start, for example, lice. And who will like the prospect of compulsory cleaning after bathing? Agree that this is not the most pleasant procedure. If you do not live on the first floor - there are great chances to pour the living below the neighbors. Solve these problems will help polyvinyl chloride corners for the bathroom.

Many simply fill the gap that forms with the sealant. However, this seam will look aesthetic only if the distance between the wall and the bathroom is small. Many people refuse such a decision. The fact is that very soon in such a seam appear mold fungi. In addition, if the gap exceeds half a centimeter, then in the sealant, gaps may form, through which water will still leak.

A good option for solving this issue will be plastic corners for the bathroom. They are suitable for both steel and cast iron, and for acrylic containers. Usually specialists are invited to install such parts and carry out associated works. But many try and solve the problem on their own.

Progress

How to install a corner on the bath? First you need to stock up on the necessary accessories. You will need the following:

-polychlorovinyl corners for the bathroom;
- a flexible spatula of medium width (3-8 cm);
Silicone silicone.

If you need to install a plastic corner on the bathroom of acrylic, then apply glue on the bathtub itself is not necessary - under the influence of hot water acrylic plays a little. Therefore, it is useless to firmly fix a PVC component. It will be enough to apply silicone directly to the edge of the corner, which will be adjacent to the wall. After that, you should give the glue a little dry (as written in the instructions) and gently apply the prepared piece to the wall. Firmly press it and leave the day to fully solidify the silicone. After that you can use the bathroom.

If you have a cast iron or steel bath, you need to glue the corner to both the side and the wall. In order to accurately "fit" the bath in the corner of the room, It is necessary to make a cut beforehand at 45 ^° on the opposite polychlorovinyl corners. However, it is not always possible to achieve an ideal result. To facilitate the solution, you can buy special fasteners. They are sold in many construction shops. After the drying of the silicone, it is possible to paint the polyvinylchloride corner with waterproof paint in a suitable color.

Alternative solution

It should be noted that the corners for the bathroom can be used in the event that the gap does not exceed 25-30 mm. If this distance is greater, a standard ceramic tile should be used to prevent water from entering the floor. You can cut off the necessary size pieces from the tiles that are left from the wall lining. If the size is suitable, use decorative cutters, which manufacturers almost always add to their series. And you can buy a tile for the corner, which will contrast beautifully with the main background of the room.

Choose the solution that is right for you, and start repair!