How to calibrate the sensor on the "Android"? Sensor program

Calibrating the sensor of a mobile device is one of the priority items in the setup. It is understandable that the wrong operation of the screen when calling a command or procedure, pressing buttons or links at best causes irritation and waste of time, so it's better to initially spend a few minutes to adjust the screen depending on your needs. This is done quite simply.

When and why do I need to calibrate the sensor?

To date, Android-devices can be found two types of screens - resistive and capacitive. The first type is used in obsolete devices, and all modern gadgets use the second type, because it is more reliable in operation.

Proceeding from this, it is easy to make a conclusion that resistive screens require the calibration of the sensor more often (approximately every 2-3 months).

Nevertheless, it is possible to give a list of situations when the question of how to calibrate the sensor on the "Android" will have to be solved in the first place. There may be several reasons. Among them are the following:

• Mechanical damage to the screen;
• The ingress of moisture and dust;
• Replacement of the touchscreen ;
• Sticker or removal of protective glass and film coating;
• Buying a used device with hands, etc.

But in general, almost all experts recommend that you perform a calibration every month or two.

How to calibrate the sensor on the "Android": the basic methods

As for carrying out the calibration itself, you can do this in several ways:

• Make the necessary adjustment yourself with the use of the operating system Android;
• Calibrate the sensor with the help of specialized utilities;
• Take the device to a service center.

Each of these methods has advantages and disadvantages, which will be discussed in more detail below.

Manual calibration by means of Android

In the simplest case, the problem of how to calibrate the sensor on a tablet or smartphone is solved simply.

To perform a preliminary test on the device, you need to use the settings menu, where the tilt sensitivity section is selected. In the new menu there is a special test button, which you need to press.

The adjustment of the calibration is in the settings section of the phone (tablet), where there is a corresponding line. When you enter this menu, a cross with a red dot inside will appear on the screen, which should be pressed as accurately as possible (3-4 times enough), then save the settings and check the gadget for operability. If it is noticeable that some controls are not functioning correctly, the setting should be repeated.

In addition, you can adjust not only the force of pressing or the accuracy of hitting the point of the screen, but completely adjust any sequence of actions (stretching the image, single or double tapping, dragging the screen, etc.).

Pay attention to the fact that the built-in program for the sensor "Android" devices, depending on the version of the operating system itself, can be located in another menu, for example, in the display settings. In addition, the setting of the pointer speed parameters is in most cases done in the language and input section, so be careful.

Use of specialized utilities

If the sensor calibration program is not found in the system menu or in use causes some difficulties, you can use the installation of additional utilities, among which the most popular are the following:

• Bubble;
• TOPON;
• GPS Status & Toolbox;
• Clinometer and the like.

In any case, you can go to the official Google Play service to search for the needed utility there. If the programs found there are not suitable for the user, something similar can be found on the Internet, only then they will have to be installed in manual mode, allowing the use of the installation from unknown sources. In addition, you can even install special utilities for the same Windows-systems (together with the Android emulator) and configure them with them.

Contacting a Service Center

Programs for Android systems are good. But what if none of the above methods yields the desired result? Apparently, the problem is that there is a serious breakdown in the device itself, because of which the application of software methods does not work.

In this case, the problem of how to calibrate the sensor on the "Android", is solved only by handing the gadget to an authorized or private service center. Naturally, this will entail monetary costs, but specialists will be able to identify and eliminate the cause of the malfunction. In addition, everything depends on what has broken down. In this case, as already understood, internal intervention in the components of the device itself will be used.

What in the end?

That, in fact, and everything, as to how to calibrate the sensor on the "Android." If we talk about the preferred method, in the simplest case it is best to use the built-in means of mobile devices. If their application does not give results or accurate calibration for some reason can not be made, try using third-party applications.

Do not forget that not everything and not always depends on the software. As already mentioned, the impossibility of using such methods can be associated with the destruction of the device, and here without the intervention of specialists can not do. In addition, the device can still be under warranty, and it should not be disassembled (so you can lose it). Finally, if the owner of the gadget does not have the necessary knowledge to perform repair or maintenance, try not to experiment with the device.

Otherwise, provided that the device itself is in order, we recommend that you access third-party utilities, since most of them allow for more fine-tuning, and some also have built-in test modules, which allow the user to set recommended parameters upon completion of the test.