Hobby, Needlework
How to build a pattern of skirts? The sun is an excellent cut for a fashionable skirt
All girls love fashionable things. Everyone dreams to dress beautifully and meet the standards of beauty. But the fashion is so changeable that it is beyond the power to pull financially expensive new things. But there is a very simple solution, because sewing yourself a fashion thing is not so difficult. For example, the pattern of the skirts of the sun, descended from the podiums of fashion designers and won the hearts of the general public, is constructed very easily and quickly, and sewing does not take much time. And in the end, a trend thing appears at a very favorable price.
The description of how to build a pattern of skirts sun and top for creating a dress will help to build a chic outfit that will not yield to things from an expensive clothing store.
Selecting the material for the skirt
What kind of fabric is better to choose to make a beautiful skirt the sun (flare)? Pattern suggests that the material should fall off from the waist to the bottom of the product beautiful tails, which means that the canvas must be tight enough to hold the shape. For such a product suit fabrics, as well as a coton. If you need to sew a skirt for the holiday, then you can consider the options of brocade, dense lace, which will require an additional cut of fabric for the lining. And it is better that the density of these materials and the ability to keep the shape are maximally the same. Then the product will be harmonious.
The work will also need threads in the color of the canvas, an elastic band of at least 5 cm in width or a skirt zipper and buttons for the girdle.
Building a pattern skirt sun
Cutting can be done directly on the fabric, without developing any blanks and patterns. Pattern skirt the sun is located on the canvas as follows:
- Fabric folded in half along, and afterwards across;
- From a corner retreat a certain amount of centimeters and draw ¼ part of the circle so that the length of the line is equal to ¼ measure of waist circumference;
- If it's a skirt pattern of the sun on an elastic band, then it follows the original value to take the hip circumference to make the product easy to put on;
- Further from the received boundary first along the folds of the web, and after and over the entire field, the length of the product + 4 cm is deposited on the processing of sections along the top and bottom;
- If desired, the whole piece can be cut into two panels or one cut for the seam into which the zipper will be inserted (for the product on the belt).
Removing the measurements for the top on the dress
The ability to combine different patterns among themselves will create even more fashionable things. The pattern of skirts (sun and half sun) can be used both for sewing an independent garment, and for combination with templates of tops. For example, simply gorgeous will look sarafan or a dress with such a bottom. To build a top, you will need to take measurements from the figure. Pattern dress with a skirt the sun will consist of four parts: a back, a front shelf and two skirts of a skirt.
So, first take measurements: chest, waist, neck, shoulder width, back, chest height, chest tuft solution and back length and pass to the waist. For convenience, at the level of the waist, a rubber band is tied, so that the last two measurements are measured at the same level.
Transfer of measurements for top to drawing
Pattern dress with a skirt The sun involves cutting the bottom of the product directly on the fabric and developing a drawing for the template top. To make the workpiece can be used several times, it is best to take a construction film for work. It will not tear and fall like paper, and it is convenient enough to store it. At once it is necessary to note, that the pattern of skirts the sun (klesh) is much easier, but with a top for a dress it will be necessary to tinker.
The drawing is built in a rectangle, the sides of which are the chest girth and the length of the back to the waist:
- First note the height of the chest and hold the appropriate horizontal;
- After that, half the width of the back is laid on one side of the rectangle and ½ of the groove on the other;
- From these points raise perpendiculars;
- Further note the ¼ neck circumference from both upper corners and from the marks the width of the shoulder at an inclination of 10 degrees;
- On the front panel from the perpendicular line drawn earlier, retreat 3 cm, fall down to the border of the tartar solution and extend the shoulder seam to the same 3 cm;
- After mark the area of the armhole from the mark of the width of the back (1/2 of the chest circumference is divided by 4 + 2 cm);
- Then it remains to compare the measurement of chest circumference and waist and distribute the value in the side seams and darts.
Product Modeling
The skirt is sun (flared), the pattern of which is described above, can be either on an elastic band, or zipped and have a belt. The whole process of modeling consists only in the design of the fastener on the belt. This element can be with a minimum width of 1.5 cm or, conversely, wide and play the role of a decorative element. And in that, and in another case the belt is cut in the form of an even strip with a fold. In order for it to be sewn, there must be at least one seam on the skirt. It will need to be closed before the hip line, and then insert a secret or skirt zipper. The belt can also be fastened to the same zipper or have an overlap and fasten on buttons, hooks or buttons.
Decorative design of products
How can a sun skirt be decorated? Pattern, the photo of which is presented in the article, is designed solely for cutting, but on it you can outline the location of decorative elements. To do this, the template will need to be drawn and cut from the oilcloth or paper, and then, applying it on the cut linen, carry the marks on the fabric to arrange the elements evenly over the entire field.
Similar articles
Trending Now