How the satellite dish is tuned

Recently, satellite dishes can be seen on almost every home. But before they start working, they need to be set up. Setting up a satellite dish is not as difficult as it might seem at first glance. There are basically two main options for this procedure.

The first way - like those who do not want to adjust the dish yourself. To do this, you just need to apply for the service to the company where you purchased the satellite dish. They will come with their equipment and everyone will do it. And the owner at this time can do his own thing.

The second method assumes that the satellite dish setting will occur on its own. It should be immediately said that it is best to install it on the roof: and there will not be an anointing of the eyes, and the adjustment will be more qualitative. Fastening to the same should go in the complete set with a plate, therefore to fix it there it is easy. Also it should be noted immediately that in the future many people are thinking about upgrading their satellite equipment. Therefore, it is also necessary to provide for this.

As the first task, which involves setting up a satellite dish, there will be an alignment of the vertical of the pipe, behind which the plate will be fixed. If you do not take into account possible modifications, then this may not be useful. But just in case, you can simplify your task in the future. And suddenly you want to put a special polar suspension and actuator afterwards? Therefore, the pipe is best aligned properly. After that, it will need to attach the plate itself. So that it does not slip, you can purchase additional fixtures in specialized stores.

Then you should hold the cable. It should be understood that the longer the cable section will be in the open state, that is, on the street, and not under the roof, the more likely it will be damaged after a thunderstorm.

By connecting the cable to the TV, you most likely will not immediately see all the variety of channels. For their appearance, you need to configure the satellite dish. You should find at least one channel, even with a ripple and no sound. It will subsequently simplify the process of customization.

In addition, the configuration of the satellite dish will be greatly simplified if, within sight, it is also installed by someone. To choose its direction, it is necessary to be guided by the equipment found and installed. In other words - where it is directed, there you must send your device. If there are no plates next to each other, it is worthwhile to know that the equipment should be sent to the south.

If there is a special program for setting up a satellite dish, then it should primarily be guided by its indicators. If it does not exist, you will need an assistant who will stand by the TV and talk about the results. In your duties is the accurate turning of the plate up and down, right-left. It is worth knowing that even one centimeter can affect the quality of the channels. You need to move until the assistant tells you that everything is fine.

It is necessary to tighten all the bolts as much as possible and carefully after the adjustment of the satellite dish is completed. Telecard, it is worth knowing, you will need to unlock a large number of channels. Otherwise, only the main ones will be shown.