Glue Titebond for wood: specifications, instructions

One of the most popular adhesives on the modern Russian market are those manufactured under the Titebond brand. They have unsurpassed qualities of moisture resistance, can have a transparent or cream structure. For more than 70 years, the American company Franklin International has been supplying the world market with a wide range of adhesives that are used for bonding different wood.

Active research and development allowed us to introduce the latest production technologies and produce high-quality joinery adhesives, which are intended for professional use. With their help, you can easily lay a parquet board in residential and office buildings, restore old coverings that are out of order, and carry out a fairly wide range of work.

For today in assortment you can find more than 25 varieties of adhesives for industrial use, which have the brand Titebond. The most common among domestic consumers are single-component, universal moisture-repellent glues for wood, work with which must be carried out at positive temperatures. If the preparatory work is done correctly, it is good to clean the surfaces of the glued products, and also to hold them under the press for a certain time, then the promised positive result will be achieved, having obtained a long-lasting glue seam with moisture-repellent qualities.

Characteristics of Titebond II Premium Wood Glue

The glue Titebond, which you can distinguish by the designation II Premium Wood Glue, is realized in a blue package and is a moisture resistant compound that satisfies the strict American standards in terms of water resistance. It is used for gluing hard and softwoods. In carpentry, you can make surface and butt joints, as well as glue paper, laminate, veneer, chipboard, MDF, fiberboard and plywood.

This composition is used in furniture manufacture, providing the most durable setting, even with a short pressing time. You can get a great bonding strength, which is even higher compared to the wood itself.

Physical properties of Titebond II

Titebond II has a dry residue of 48%, a viscosity of 4000 mPa.s. Professionals and domestic craftsmen may be interested in such an indicator as acidity. For the described adhesive mixture, it is 3 pH. In the original packaging, the adhesive can be stored for 24 months at a temperature of +20 ° C. Use the composition at a minimum temperature of +12 ° C. At 1 m ² will take approximately 180 g.

Additional Features of Titebond Premium

Glue Titebond II Premium is resistant to high temperatures, solvents and acoustic vibrations. This composition is a polyaliphatic emulsion with strong cross-links. Products after gluing can be used for a wide range of temperatures, which vary from -30 to +50 ° C. After drying, the composition forms a film that has a clear cream tint.

Instructions for use

Titebond II glue should be used only at positive temperatures. Before beginning bonding the surface of the products should be cleaned of oils, dirt, dust and grease, as well as other substances that would interfere with adhesion. It is necessary to free the surface of the old paint. Before use, the glue is mixed, and the drying time can vary from 10 to 20 minutes. During this period, the surplus composition should be removed with a damp rag, and after drying the adhesive can be removed only mechanically. Even after freezing, the composition will remain stable, but can change the structure, becoming slightly viscous.

For reference

The wood carving glue for wood is not abrasive and can not damage the surface of the cutting tools after processing the products. It should be remembered about the toxicity of the composition, which indicates the need for the master to use personal protective equipment.

Composition of the glue

Titebond glue can have a different substrate used in production. Among the ingredients may contain aliphatic resin, polyurethanes, synthetic rubbers, polymers, proteins and water.

What else you need to know about Titebond wood glue

Joiner's glue for Titebond wood is characterized by indestructible cross-links, they create a stable chemical viscosity of the mixture. After drying, the layer is resistant to freezing, but it is worth remembering the flammability at a temperature of 100 ° C.

Composition grips with surfaces instantly and firmly, the products only need to be pressed for some time. Titebond is resistant to high temperatures and solvents, as well as perfectly removed before it dries. As the only drawback is the inability to use the adhesive on surfaces that are wetted with water.

Characteristics of Titebond III glue

The glue for wood Titebond is presented in one more variety, which is designated as III. This polymeric water-dispersion composition is supplied in packages of different volumes for the convenience of the consumer and is intended for bonding veneer, fiberboard, plywood, wood, plastic, chipboard and MDF. The composition can be used for interior and exterior work, which makes it universal. The adhesive is water resistant and can perfectly bond laminated veneer, plastic and other materials listed above. The application can be carried out hot and cold, the composition is non-toxic, has no solvents. It can be used even at low temperature.

Instructions for use of Titebond 3 glue

Adhesive Titebond 3 can be used with a minimum temperature of +8 ° C. At 1 m ² will take approximately 190 g of the composition. Within 10-20 minutes you can change the position of the part, which will depend on the external conditions. Surfaces before applying glue should be checked for moisture, cleaned of dirt, flaking and other materials that could reduce the intensity of adhesion. It is noteworthy that this glue for wood Titebond can be used for gluing products that will come into contact with food during use. It is not recommended to use it for underwater connections.

The composition is allowed to use only in intensively ventilated areas, and if it gets on the skin the mixture can cause irritation. If you feel dizzy and unpleasant effects, you should immediately go to fresh air and, if necessary, consult a doctor. If Titebond glue has got into the eyes, then they should be rinsed for 15 minutes with running water. If it has happened that the glue has got on the skin, you should remove it and wash it with soapy water. The viscosity of the composition is 4200 mPa * s. The dry residue is 52%, the density is 1.1 kg / l, the acidity index is 2.5 pH.

Conclusion

According to experts, Titebond glue is the only one-component composition that meets the ANSY TYPE II standard for moisture resistance. You can purchase the Titebond iii compound in a convenient volume package that can hold from 1 to 20 kg. If you need a small amount of glue, you do not have to overpay. Since it is designed for professional use, you can be sure that you will get the highest quality bonding compound . For example, if you previously did not deal with veneering, then the described composition will allow you to cope with the work quite simply.