Generator Fubag TI 1000: reviews, schematic diagram, repair manual by yourself

How often it happens that electricity is cut off in the house, and trips outside the city are often not accompanied by all the benefits of civilization. In these cases, there is no way to do without modern electricity generators, which make staying in the fresh air more pleasant. Under such circumstances, you can stay a few days away from a noisy city without even noticing the deprivations.

Fubag TI 1000 is a gasoline inverter generator, which is the ideal solution for powering electrical equipment and electrical appliances for short periods of time. The device generates an alternating current with a voltage of 230 V, the maximum power of which is 1 kW. If it is a gasoline four-stroke engine, it will consume about 0.7 liters of fuel per hour. At a similar flow rate, the capacity of a conventional fuel tank will be enough for 3.7 hours of continuous operation of the inverter, while the volume of the tank can be 2.6 liters.

Reviews about the main features

The Fubag TI 1000 is an equipment that is characterized by manual starting of the engine. This characteristic can impose certain inconveniences in working with an electric generator, but it allows to achieve an advantage in cost and weight. According to the buyers, the portable gasoline generator has an exceptional quality of the current produced, it allows you to connect to the equipment even the most sensitive to voltage fluctuations devices.

The digital mini power station has smaller dimensions and weight, compared to conventional generators of the same power. As the buyers emphasize, this circumstance makes it possible to use the generator even in hard-to-reach places, namely:

• fishing;
• in the forest;
• In campaigns;
• During installation works;
• In the premises of a small area.

Noise level

Fubag TI 1000, whose scheme will help a specialist, works at a low noise level, which is why this power plant is suitable for many. As practice shows, the device is low-noise and can be operated even directly near a person at any time of day. The level of generated noise is 59 dB. As users emphasize, Fubag TI 1000 can be used to charge car batteries, because the equipment has a DC output voltage of 12V. Among other things, you can feed a variety of techniques that work under such voltage and current.

Reviews about technical characteristics

The equipment described in the article has an inverter type of alternator, in the device 1 phase, and the current strength is 3.9 A, while the frequency of the current is 50 Hz. The manufacturer took care of the long service life and provided the equipment with air cooling of the engine. The generator has an oil level sensor, petrol is used as a fuel. At a load of 85%, fuel consumption is 0.7 l / h. If we are talking about a load of 75%, then the autonomy will be 3.7 hours. According to buyers, Fubag TI 1000 has a fairly compact dimensions, they are equal to 460x248x395 mm, but the weight with a dry tank is 14 kg.

What else do I need to know?

Additional parameters: presence of noise-proof casing and output of direct current in 12V. In the delivery set of the equipment there is not only the generator itself, but also a candle key, as well as an instruction manual. As an additional equipment are outlets, power cable, plugs and protection automat. Consumers emphasize that you do not have to worry about quality, as the equipment has certificates of conformity. In confirmation of this, it can be noted that the manufacturer gives an annual warranty for the device. In the service center during this time you can use the full range of services for maintenance and repair.

Reviews about quality and reliability

Fubag TI 1000, reviews about which are often only the most positive, has a digital inverter converter, thanks to this power plant is able to produce a stable current of high quality. As the buyers say, you can safely connect to it the most demanding to the quality of electricity appliances.

Consumers note that far from civilization you can enjoy its benefits. The power plant is compact and has low weight, it copes with the role of a backup power source in the workshop and in the country. It can be placed in the trunk of the car, taking advantage of the possibility of convenient movement.

User feedback on parallel connection

As practice shows, the noise level of a working station is insignificant, that's why it can be installed even near the place of use, it can be a campsite, a summer residence or a construction site. The device has a reliable OHV-engine, as well as an oil level control system, thanks to this station is ready to serve for many years. Many users appreciate the possibility of parallel connection of the station. Such equipment in the quantity of two units can be connected by means of a special device in order to obtain a higher power.

Positive feedback on performance

The inverter generator Fubag TI 1000 has some features that make the equipment more competitive in comparison with analogues. Among such factors, consumers note the presence of an informative panel, the possibility of convenient transportation and the availability of an additional form factor. As for the informative panel, you can use it to monitor the level of overload and the oil level in the unit. This functionality, according to customers, allows more careful use of the generator. Thus, it will serve the consumer of the city further without the need for repair. Using an ergonomic handle, you can easily transfer the generator from place to place, and also transport it. It is important to take into account also the presence of the SCHUKO 230B / 16A socket, through which it will be possible to power many devices from the generator without adapters.

Device repair instructions

Fubag TI 1000, the repair manual which can be useful to any user, provides for periodic inspection and cleaning of the air filter. It is inadmissible to use gasoline or solvents for these purposes, this is due to the fact that these substances are explosive and easily ignited. At the first stage, it is necessary to unscrew the fastening and remove the left cover, designed for maintenance. Then the cover of the filter itself is removed, for this you need to press the latch and take out the filter element. At the next stage, the master rinses it, for this, lowers it into clean engine oil. Then you have to press the elements and set it back. The filter cover is closed, the service cover is installed, and the screws are screwed in at the last stage.

Check and cleaning of spark plugs

Fubag TI 1000, repair of which can only be carried out by an experienced master, provides for periodic inspection and further cleaning of the spark plugs. In order for the power station to work stably, the spark plug must be clean, the clearance must be correct.

To check the condition of this element, remove the spark plug cover, and then remove the spark plug cap. It is cleaned, and afterwards you unscrew the candle with a special key. The candle is inspected for damage, if the insulator is damaged, the element is replaced, the candle is cleaned. The master should check the clearance of the candle, which should lie in the range from 0,6 to 0,7 mm. If necessary, the clearance should be adjusted.

The candle is set back, and it is important to avoid distortions. The candle needs to be screwed with a key, if it is a new one, then it requires 0.5 revolution. If you have installed an old candle, the speed can vary from 1/8 to 1/4 of a turn. The next step is to install the cap of the candle and close the lid. It is important to secure the candle securely, if it is badly strengthened, then it is possible to damage the entire power plant. Sometimes users make the mistake of applying candles of inappropriate temperature conditions. It is inadmissible to use a candle without damping resistance.

Carry out a check and clean the spark arrester

After the Fubag TI 1000 generator is turned on, it will remain hot for a while, and you should be afraid of burns. It will be necessary to check and clean the spark arrester, it is necessary to perform these manipulations every 100 hours of operation. At the first stage, the screws are loosened and the back cover is removed. Bolts of the muffler should be unscrewed, removed, followed by a gasket, it should also be removed. The gasket is cleaned with a brush, it must be checked for burnout. If necessary, this element is replaced, and in the next stage the assembly is carried out in the reverse order.

Basic Faults and Solutions

Fubag TI 1000, the repair of which you can independently implement, in the process of operation may face some difficulties. Sometimes they are expressed in the fact that the engine does not start. It is important to check if there is fuel in the tank, if so, then you need to make sure that the device has enough oil. Sometimes it happens that there is no spark in the candle, it is replaced, and if you can not solve the problem with the help of these manipulations, you should contact the service center. If the engine does not start due to lack of fuel in the tank or insufficient oil, it is necessary to fill in the appropriate liquid. The master should definitely check whether there is around the gasoline plug, otherwise fuel can catch fire and lead to damage to equipment. If the power plant did not work, then you should contact a specialist. Sometimes problems in the engine are solved by removing the candle cap and cleaning it. The candle is turned and inserted into the cap. The candle casing should be closed on the power station casing. The starter stretches and checks the spark.

The Fubag TI 1000, whose repair instructions are described in the article, can face such a nuisance when the voltage indicator is not lit. If this happens, then it should be checked whether the overload indicator is on, if this is the case, then you need to clarify whether the energy users are healthy. If the answer is no, you need to turn off the appliances and contact the service workshop.