Drain for a washing machine into the sewage system by one's own hands: installation features, connection and feedback

A washing machine is not uncommon in modern houses and apartments. It is convenient, fast and not tiring - the washing process is fully automated. Millions of people appreciated these benefits. However, buying a car is half the battle. The second half - the connection of the device to the water supply, electricity, sewage system. And this process can become for beginners a complex puzzle. Let's look at how to independently organize a drain for a washing machine into the sewer. This will simplify the installation process for many.

Preparatory work, choice of location for installation

A suitable model was chosen, payment was made, and finally the long-awaited device was delivered. And what next with this? Perhaps, the connection work is paid, and experts will be engaged in it. But if not, you'll have to do everything yourself. The first thing you need to find a suitable place for a washing machine.

It is better to install the unit in a corner in the bathroom or in the space in the kitchen furniture near the washer / dishwasher. Sometimes, for certain reasons, the machine is placed even in hallways, under stairs, in cellars and in pantries - in any places where there is space for the apparatus.

Where a washing machine is installed, cold water supply lines and drains for the washing machine must be provided in advance. And this plum is most often in the bathroom or in the kitchen. In any other premises to lay these pipes impractical and expensive.

The drain hose of the standard washing machine is up to 3 meters long. Experts do not recommend extending it. The pump that pumps water is calculated approximately the same three meters. If the drain is longer, the pump may fail.

Another important point about the place for a washing machine is the floor. The best coating is ceramic tiles. The fact is that the machine vibrates strongly during operation. Modern floor coverings will become unusable if they are regularly affected by such forces.

Having chosen a suitable place, you can start unpacking the equipment. The main thing is special locking screws. In the process of transportation, these nodes fix the drum. This is done in order to exclude its movement. It is necessary to unscrew the bolts, otherwise the machine will immediately fail.

Connecting the sewer to the sewer: the complexity of the work

It is possible and necessary to make a drain from a washing machine into the sewer system with your own hands. With this operation, any master familiar with plumbing equipment will cope. If there is no experience, then it is necessary to be extremely attentive.

The connection operation can have different complexity. It depends on the distance from the machine to the drainage site, the material of the pipes installed in the apartment, the length and diameter of the connecting hoses included in the kit.

Ways of connection

There are several options for connecting the machine and the sewage system. Everyone has certain shortcomings and advantages, as well as important points. The choice of the appropriate option depends on the features and wishes of the owner. Let's see how to drain the washing machine into the sewer.

A very easy and simple method is to fix the drain hose to the edge of the sink, bathtub or toilet bowl. There is another method. This is the connection of the drain hose and siphon siphon. The most popular way is to install a drainage pipe with a sewage system through a special siphon. The element looks like this.

And, finally, it is always possible to attach the drain of the washing machine directly to the sewer. Below we will look at each method in more detail.

Draining into a tub or sink

If there is no particular desire or skill in working with plumbing equipment, it is always possible to attach a drain hose to the edge of the bathtub. There is a special hook for this. The hose can be short, and it is not recommended to lengthen it - this must be taken into account. The disadvantage of this method is that after each washing process the bath should be laundered.

If you decide to use the hook, you need to make sure of its fastening. If there is even a slight chance of breaking the hook, it threatens serious flooding. For one ordinary operating cycle of the washing machine, the pump pumps up to 100 liters of water. All this volume must go to the sewer system, but not to the floor.

Such a drain is most often used as a temporary drain. Home masters use more reliable methods of connection. You just need to decide how to connect the drain of the washing machine to the sewer - directly to the pipe or through the siphon. Next, we'll talk about this in more detail.

We connect the machine through the wash-basin siphon

Whatever the design of the sink, there must always be a siphon under it. It is necessary to create a water stopper. This very cork does not allow smells from the sewer to get into the room. To it and connect the drain from the washing unit.

Almost all the branch pipes between the sink and the bottom of the siphon have the necessary connectors for switching on the drain of the washing machine. These pipes are hidden by default under the cork. If there is no hose, it is necessary to purchase a new siphon.

The reviews say that this is an affordable, extremely simple and yet reliable way to arrange a drain for the washing machine into the sewer. The most important thing in this case is to install the cuff. This will save you from unpleasant odors.

Specialists recommend not to handle compounds with special compounds. If the system is completely sealed, the dirty water from the sewage system will be sucked into the tank of the washing machine. Such cases are rare, but still happen sometimes.

This method has many advantages. But there is a minus, although he is alone. In the sink there will be water from the washing machine. It is impossible to solve this problem. It is necessary in the course of washing to try not to use a sink or to arrange a drain for a washing machine into the sewer in another accessible way.

The pump, which pumps out dirty water, is located at the very bottom of the washing machine. On the back wall there is a special fixing element for the drain hose. It is at a distance from the floor of 50-60 cm. The point at which the branch pipe is connected to the siphon nozzle should be an order of magnitude lower than this height. If the hose is bent in the shape of S, then this is the most suitable option for connecting to the wash basin through a siphon - note the reviews.

Installation of a siphon with a non-return valve

Many modern plumbing devices are equipped with a non-return valve. It does not allow dirty water to get into the tank of the washing machine with clean linen, and also does not allow water to flow out of the tank. However, old machines of such a valve in the device do not have.

On sale there are siphons equipped with a special valve. It is located in the branch pipe (in the place where plum is connected in the typewriter). When connecting through such an adapter to drain the washing machine into the sewer system, many different problems can be avoided. The siphon itself is offered at affordable prices, you can find it in any specialized store.

Connect the drain directly

If the siphon can not be reached, then it is necessary to connect to the sewage system directly. But here it is necessary to apply the skills of working with plastic pipes. The process will require special tools. Also, tees, seals and cuffs, hoses to create a branch.

The simplest version is the installation of a tee with a coupler for the washbasin and washing machine. Do not fully seal the joints - enough standard seals. It is unacceptable that the end of the drain in the sewage pipe is wet. The hose must bend to create a water stopper. The connection point is selected above the hose outlet from the machine.

If the installation site of the washing machine is far from the washbasin, then in this case it is necessary to lay a horizontal coupler from the pipes. On the way to the typewriter, a bend is made at an angle of 90 degrees. The height of draining the washing machine into the sewage system must be at least 30-50 cm.

Plum height

It is important during installation to ensure that the height from the legs to the drain is not less than 60 cm if there is no check valve in the machine. The diameter of the tee is better to choose approximately 40-50 mm. It is necessary for the jet of water to burst, otherwise there will be absorption.

Common Mistakes

Any novice home master is not immune from errors. It is necessary to know the places where problems can arise, and not allow errors during the connection of equipment. After all, eliminate the shortcomings will be very difficult. Often, the craftsmen make four small mistakes.

Often the connection is made without proper fixing of the drain hose. When the machine starts spinning, the water comes out of it under pressure. If the hose is not secured, there will be enough pressure to tear it out of the sewer system.

Another mistake is the small size of the siphon. Each device has a certain bandwidth. If the siphon has a narrow aperture, problems arise with the drain. Dirty water can go up in the washbasin.

A long hose is also a gross installation error. The pump can not cope with the supply of water through a long hose from the devices to the sewage system. For this reason, clogs and pump failure often occur.

Finally, another oversight is not a too deep washbasin, but also a drain hose on the side of such a sink. If draining without a siphon, then the tube is better to install on the bathroom, rather than on the sink. Otherwise, overflows are possible through the top, and, as a result, flooding the room.

Conclusion

So we learned how to connect a washing machine sink to the sewer. To ensure that everything has turned out, it is enough to follow the advice of specialists and not to experiment. Otherwise, you can not avoid problems with the operation of equipment.