Cover for toilet with microlift: choice, installation, repair

The functionality of plumbing is constantly growing. Another interesting novelty is the lid for the toilet bowl with microlift.

At first glance it seems that this is not such an important detail of the plumbing fixture. But sometimes it is not always possible to hold the lid on lowering, as a result of which it falls down, causing irritation. In this case, the plastic can crack or there will be scratches on the surface of the toilet bowl. In such a situation, the lid with microlift helps.

How does the microlift work?

The action of the new device consists in the smooth and slow lowering of the cover onto the rim. As a result, no loud noises from impact and no damage to the surface of the device. Ceramics always require careful handling, since it is impossible to restore it to its former state.

Microlift acts on the principle of door closer, only smaller. The mechanism consists of only a spring with a rod and hinges. It is calculated by the weight of the cover to gently brake it when lowering. This function is performed by a spring. The rod serves to hold the lid and fix it in the lower and upper positions.

You can not disassemble the structure. When reassembled, it will no longer work as before.

Lifting the cover is done manually. To lower it, it should be given a slight push, after which it starts to move independently under the action of the spring.

The expensive lid for the toilet with microlift contains a motion sensor, at the signal of which when the person enters the toilet, it rises, and when it leaves it falls.

Advantages

Not everyone knows the advantages of sitting with microlift, which consist in the following:

• Simplicity of installation;
• Noiselessness of lowering;
• Automation in expensive models;
• The possibility of application for any toilet:
• Protect the ceramic rim from cracks and scratches.

Microlift allows long-term preservation of the aesthetic appearance of the toilet bowl. Modern models are no longer produced without it, because it is an indicator of prestige.

What kind of seat to buy for the toilet?

When the lids for the toilet bowl with microlift are selected, the price is important, but nevertheless it is necessary to purchase models of well-known manufacturers. Buying an expensive product from a well-established manufacturer in a specialized store, you get a quality guarantee, and sometimes the possibility of replacing a damaged item in the service center. Prices for lids with a micro-lift of European quality start from $ 100 and above, and elite models - from $ 1000.

It should be preferred to American or European plumbing companies that have long mastered its production and have proven themselves well. In addition, they have more variety of shapes, dimensions and colors, which makes it possible to choose a suitable design for the bathroom interior.

Choose a seat with a micro-lift with the following features:

• Do not need to buy cheap products, but it is better to stop the selection on the average price range;
• The model must match the interior of the bathroom;
• Attention should be paid to the material of the product;
• The device should be practical, convenient and fit the size of the toilet;
• Before buying, you need to collect all possible information about the product;
• Models can have additional functions: seat heating, automatic lifting of the lid on the signal of the presence sensor of the person, etc.

Material

The most common lid for the toilet with a micro-lift of duroplast, characterized by great strength and resistance to mechanical damage. The material serves for a long time, it is resistant to aggressive chemical media, it is easy to wash, preserving the original color. High quality of rigid plastic products of the brand Roca Dama Senso (Spain). Covers of duroplast often found in public toilets, but you can use them in your home.

Wooden covers are also often used, but they require special care.

On some models, the lid for the lid is easily removed for cleaning. They can be recognized by the Quick Release function.

Cover for toilet with microlift: repair

The longevity of the lid with microlift largely depends on the correct operation. If it is sharply lowered, the mechanism will quickly fail. To bring the device into action, a light push is enough. Adults quickly learn the rules of using a microlift, but children do not always get it. The spring of the mechanism is not designed for sharp compression. It can withstand a certain number of cycles of lowering the lid, but can lose its properties from one time. Sharp mechanical influences lead to breakages, which can not be corrected.

The reason for the rapid deterioration of the mechanism of the microlift may be incorrect selection of the model, as well as errors in installation and operation. Purchasing a cover with a micro-lift, it is necessary to consider the following:

• Conformity to the form of the toilet bowl and the method of attachment;
• Select products of proven manufacturers;
• To focus on your own experience.

Externally, the mechanism of the lowering mechanism looks simple. But you should not disassemble it. The adjustment is made by means of a spring, which is balanced for the weight of the lid.

Dismount the cover

A sign that the mechanism is broken is the lowering of the lid with a blow on the rim of the toilet. The cover can be replaced most easily. To do this, you need a tool:

• Suitable socket wrench;
• pliers;
• Hacksaw for metal.

With long-term use, the thread of the fastening is dirty and it is difficult to unscrew the fastening. He is clamped with pliers and turns the bolt with a key. If it does not give way, it is sawn with a hacksaw.

Fitting a new seat

The new lid is easily installed by hooking the fixtures into the grooves of the toilet bowl.

Then the bolts are tightened. The thread should be pre-lubricated with silicone, in order to unscrew them later. Before the final tightening of the bolts, the structure is leveled, and its fit to the rim of the toilet bowl and height is regulated. At installation it is necessary to familiarize with the instruction where each operation is in detail described. Some products have special hinges and can be easily removed. From the correctness of the adjustment of the seat depends the longevity of the device.

It is especially important to carefully treat the procedure of mounting the cover with a micro-lift, when the device has several functions. If mistakenly used, it can easily be damaged.

After dismantling the device, the microlifts from the right and left sides are disassembled. If they consist of cylinders with pistons, you should check the lubricant inside. When the cylinder accumulates in one place, it is evenly distributed over the entire surface and, if necessary, added to the required amount or replaced completely. With a lack of lubrication or a change in its structure, the lid starts creaking when opened or closed. It is also important to use the correct lubricant composition.

A microlift for the lid of a toilet bowl on sale is not easy to find for an ordinary user.

Repair parts have service centers, where you should go for help. It does not hurt to ask about the price of repairs. If it is the same order with the cost of the product, it is better to purchase a new cover.

Manufacturers

The most famous manufacturers of sanitary ware, including toilet seats with seats on microlifts are European companies. The Spanish company Roca manufactures covers with pneumatic microlifts Roca Dama Senso. They are made of stainless steel and are distinguished by their reliability and durability. In them, functionality is combined with different styles to choose a buyer. Strict forms of models are suitable for both outdoor and hanging toilet bowls.

In Russia, a joint venture Santek has been set up, which produces these products. Spanish products have a higher quality of materials, but domestic products are not much inferior to them at affordable prices.

High quality products are produced by GUStavsberg (Sweden) and Orsa (Italy). They can be purchased at medium prices, but there are also expensive premium models.

The lid-seat for the toilet with microlift with nanocovering is made by the Chinese company Portu. Products are distinguished by a variety of color solutions and new styles.

Conclusion

The lid for the toilet bowl with microlift is supplied complete with a toilet bowl by all known manufacturers of sanitary ware, as it is an indicator of the prestige of the product. Handle with it should be cautious, since the non-separable design of the actuator is largely unavailable for repair.