Block house - imitation logs of wood, plastic. Facing materials

Recently, wood and plastic have been used as decorative materials. In the first case, this is due to the decorative properties, thanks to which the building acquires an exquisite and unique appearance. Among other things, the wooden product is longevous and reliable, and it also allows the walls to breathe without releasing toxic substances. One of the most popular modern materials for indoor and outdoor decoration is the block house, imitation of the log in its performance looks presentable. Board is a product, the front side of which is convex, and the back is flat. For reliable fixation and easy installation on the sides there are docking elements: grooves and spikes.

Advantages of block house made of wood

Wooden imitation of logs has certain advantages over other materials, among them low cost, excellent performance, ease of installation, and environmental friendliness. Low price is associated with the features of the technological process. In the course of manufacturing, the log is sawn, and its inner part is taken out and goes to the production of timber. The outer component is used to make the block house. Thanks to this, manufacturers are able to achieve non-waste production, which has a beneficial effect on the cost of the material.

Simulation of a log made of wood has excellent operational properties. The material does not crack, is not deformed and has good thermal insulation properties. Under the influence of external factors, it does not change the original linear dimensions and excellently tolerates the effects of atmospheric precipitation, as well as sunlight. In spite of the fact that wood is a fire hazardous material, in the process of manufacturing imitation logs are treated with special compositions and impregnations that can provide fireproofing finish.

As practice shows, it is quite easy to install such a lining, for this you do not have to turn to specialists for help, which allows you to reduce the cost of work. For the owners of houses, which are important to the health of their loved ones, imitation of logs from wood is excellent, since only natural materials are used in the manufacture. In the process of exploitation the material will produce phytoncides, which contribute to the improvement of human health. If the basis is coniferous wood, the isolation of resins increases the waterproofing properties of the products.

Dimensions of the block house

The dimensions of the material will depend on the dimensions of the log, which formed the basis. The length can be equal to the limit of 2 to 6 meters. As for the thickness, it varies from 2 to 4 centimeters. The width can be different: 14, 17, 19 or 20 centimeters.

The main disadvantages of the wooden block house

Despite the fact that the imitation of the bar has many advantages, it also has some disadvantages, namely, the tendency to scratching. This indicates that transportation, as well as loading and unloading, can be problematic. This applies to the operation, because the surface will have to be used as accurately as possible. Among the minuses, one can distinguish a tendency to darken and pollute. You need to look after the products and, if necessary, treat them with paints or other protective means.

Installing a block house

Quite often, home decorators independently carry out finishing, imitation of the log is installed on the crate, and the elements themselves are fastened together by means of a lock joint. It is important to wait until the material dries, use wet panels is unacceptable. Drying, the tree will give a natural shrinkage, so when performing the lining with a damp material, cracks and gaps may appear during operation.

Initially, it will be necessary to install a crate, which is made of bars of a minor cross-section. This allows you to make the surface as flat as possible. Laying can be done vertically or horizontally, everything will depend on the preferences of the owner of the house. You need to install the products by turning them up with a thorn. This technology allows to avoid the accumulation of moisture in the grooves, which can lead to rotting of the material and further spread of the fungus. Quite often, such work is carried out in parallel with the installation of hydro, heat and sound insulation materials. They are located in the space that is formed between the cladding panels and the crate. In addition to the locking joint, the products are additionally fixed to the crate. The method will depend on the thickness of the material. Thus, wide products are fixed with screws, while thinner ones are clamped with zinc coated, which excludes corrosion.

Characteristics of vinyl block house

Vinyl siding - imitation logs - allows you to create a facade in the image of a chopped log house. The walls will be protected from atmospheric precipitation. If you decide to choose this trim, then it is worth getting acquainted with its features. Vinyl panels perfectly cope with mechanical influences, do not rot and do not ignite. Use this lining can be in the working range, which varies from -50 to +60 degrees. By choosing this inexpensive material, you can create a facade that will completely imitate the color and texture of natural wood. During operation, the material will be able to cope with the effects of solar radiation, the surface will not burn out. Masters note that the panels are easy to install, unlike the wooden block house, do not need additional care.

Installation of vinyl siding

Imitation of the beam for the facade today is presented for sale not only in the form of wooden, but also vinyl panels, they are installed according to the principle of a conventional block house. However, it is necessary to comply with certain rules, which are dictated by the properties of the material. The installation of products must be carried out in such a way that nothing is prevented by the compression and expansion of the material, this will occur with temperature fluctuations. Fasteners must be anti-corrosion, anodized or galvanized. These can be self-tapping screws or nails of sufficient length.

When fixing, leave a temperature gap. If in the process of work you decide to use self-tapping screws, after twisting, they should be turned out one turn. When installing siding (imitation logs) using nails, a gap of 1 millimeter should be left between the cap and the surface.

Tips from a specialist

Panels of vinyl siding are installed according to certain rules, they provide mounting fasteners in the prescribed places of perforation. If there are no such holes, they are pre-punched. Fasteners should be located perpendicular to the skin. Between the attachment points there should be a distance that does not exceed 40 centimeters.

Conclusion

After installation of the lath , steam, heat and wind protection are installed. The elements of the siding are installed by moving upwards from the bottom.