Automatic regulation of submersible pump operation

Nowadays, more and more people are digging in their summer cottages. In this case, we are talking about the use of a submersible pump, which pumps water from the very depths of the earth. This unit has a rather complex structure. In order for the submersible pump to work correctly, it must be equipped with additional control and regulation systems. In this case, the problem arises as to where all these regulation and control units can be placed.

The pump control cabinet is the best solution to this problem. All distribution structures are placed in it. Such control and regulation systems allow to change the engine rotation frequency depending on operating modes, to control its temperature, to connect emergency shutdown elements and so on. The cabinet can accommodate a variety of very useful electronic components. Thus, it can be said that the main purpose of the pump control cabinet is to improve its operation through automation. Now the person does not need to constantly monitor the state of the pump and fluid in the well. All processes are fully automated. With the help of such an aggregate it is possible to provide a smooth start-up of the engine, monitor the operation of the frequency converter, and so on. Thanks to the multifunctionality of the cabinet, it is possible to control parameters such as system pressure, temperature and water level. Often, such data is very important for both the owner of the well and for specialists conducting geological studies of the area.

Thanks to the pump control cabinet, it is possible to fully control its operation, and, consequently, to increase its service life. This is a very important factor, which makes more people use automatic control cabinets. Today, a submersible pump is quite expensive, so it is worth maximizing its life. In the process of operation it is affected by a huge number of various adverse factors that can simply disable the unit. With the pump control cabinet this can not happen. Here you can configure the operation of the pump to trifles. It will become a smart unit that will strictly fulfill all the programmed requirements of the system.

Virtually all modern pump control cabinets have two modes of operation. The first mode is automatic, which allows the unit to operate in accordance with the specified parameters. There is practically no human influence on the operation of the pump as a whole, therefore mistakes related to the human factor are almost completely eliminated. In manual mode of operation, it is possible to start the pump, as well as operate it directly from the operator's console, which is also located on the switchboard. However, in most cases, in the case of wells, the manual mode is not used. All work takes place in the machine, which saves considerable time and effort.