A simple way how to flash an iphone

In addition to all utilities for flashing iPhones, there are alternative ways. One of them is described below, the simplest and most convenient one. It is suitable for most owners, including those who do not know how to flash the iphone 4g. It does not hurt to mention that this version works flawlessly in almost all models of phones and OS (especially since some programs just do not support Windows). Therefore, if you did not manage to flash an iPhone in other ways, you should pay attention to this article.

What is needed for this

So, how to flash the iphone. Unlike the use of special utilities, everything is extremely simple here. It is required to find a custom firmware for phones on the Internet and download it. Usually this is a small file with the extension .ipsw, like most others like it. The downloaded file is the same standard firmware, only unlocked, hacked and containing additional useful utilities, such as Sidia or jailbreak. For further action, we will need to install this file on the phone.

In such a difficult matter, how to flash an iphone, the user will also need some additional utilities. Firstly, it's iTunes, and the latest version is best. Typically, this can be downloaded through the program itself in the updates section. If for some reason you can not do this, go to the official developer site (apple.com) and download the latest version there. You will also need to download the Windows utility called iH8sn0w. Actually, the very custom firmware too.

In fact, there are a lot of options. Have to choose the one that most suits the user. After all, one more important is the built-in programs, others are concerned about the size of the system file. The main thing that it was for your iPhone model. Important: before starting any action, you must check the synchronization of the phone with iTunes, otherwise it will not work. And, of course, save all the data. This will return the necessary information and settings, returning the device to its original state.

How to flash iphone: the order of user actions

Now go to the process itself. First you need to start iTunes, then connect your iPhone to your computer. Next, you need to put the device into recovery mode. Those who do not know about such a function on their phone, proceed as follows: we clamp both Home and Power on the buttons and hold them in this position for about ten seconds. It's about the keys on the phone, not on the computer, of course. After the mentioned ten seconds, release the Power button, but hold the second pressed for the same time. If everything is done correctly, a system sound will be heard in the phone, informing you of the activation of the recovery mode.

From now on, we need to close iTunes and enable the iH8sn0w utility. In the window that opens, you need to select the desired device option. After a few seconds, the screen of the phone turns white, and the application closes with an error. Do not panic immediately and think that you have done something wrong. All is well, everything goes according to plan. This effect should be. Then you should start iTunes again. A window will appear with the only available "Restore" function (in English). By holding down the Shift key (or alt for Mac users) on the computer keyboard, click on this function.

On the screen should appear another window, in which the user will be offered to choose the firmware version. You will need to find the downloaded file and open it. This ends the owner's actions, the program works by itself. It takes about ten minutes to complete the firmware, but for now you can drink a seagull. When the process is over, you will need to reconnect your phone to iTunes and restore the previously saved data. Now you know how to flash the iphone. In principle, during the flashing process, you can do without the iH8sn0w program, but in this case, various errors may occur.