Towbar on "Niva Chevrolet": review, installation, models and owner's feedback

"Chevrolet Niva" is an SUV that is gaining increasing popularity among car owners. It is no wonder, after all the car is practical, reliable and will not get stuck in the first pit. Trips for the city on sedans and even become a total torment. Often lovers of long trips and outdoor recreation think about the use of additional equipment.

What is a towbar?

представляет собой специальное сцепное устройство, предназначенное для соединения автомобиля и прицепа. The towbar on the "Niva" is a special coupling device, designed to connect the car and the trailer. This device allows you to carry additional cargo, which does not have room in the cabin and luggage compartment of the car.

If the vehicle itself is a source of threat on the road, then a car with a towbar is a double threat. For this reason, the selection and installation of equipment must be taken with all seriousness.

The manufacturers of towbars for Niva have the appropriate specialized equipment, all parts are quality tested and have the necessary certificates of conformity.

Craft production of models of towbars

The first models of the "Niva" did not have the necessary places to fasten the towbar, for this reason, car owners had to develop and install the equipment themselves or go to handicraft workshops, which created significant risks.

Independent production of towbars assumed several types of installation:

Установка и крепление на направляющих бампера. 1. Installation and attachment to the bumper guides.

Установка и закрепление на лонжеронах и кузове. 2. Installation and fixing on the side members and the body.

Similar designs did not pass any checks, so they often caused traffic accidents. In addition, the appearance of the installation itself sometimes caused confusion among passers-by. Often the client expressed a desire to use gas equipment, the cylinders of which were installed just on the back of the car. For this reason, the design was attached to the side members, and its appearance turned out to be rather strange.

The hook on the "Chevrolet Niva"

"Chevrolet Niva", unlike its predecessor, has the necessary elements for the installation of equipment:

Имеются точки крепления, которые укреплены резьбовыми соединениями. 1. There are fixing points, which are reinforced with threaded connections.

Места крепления фаркопа имеются на любой "Шеви", но при продаже модели без фаркопа они просто заклеиваются скотчем. 2. The places of fastening of the towbar are available on any "Chevy", but when the model is sold without the towbar they are simply sealed with adhesive tape.

It is for this reason that the owner of an off-road car can independently cope with the installation of the towbar, following all the necessary requirements. фаркоп на "Шевроле Нива" прекрасно дополняет автомобиль, гарантируя безопасную эксплуатацию на дороге. Now the towbar on Chevrolet Niva perfectly complements the car, ensuring safe operation on the road.

The improved model of the machine made it possible to make the hitch not only a means for attaching the trailer, but also an element of the bottom protection. The convenience of using the structure is felt at the first application. Any distances to the updated off-road car will be on the shoulder.

Terms and conditions of operation

To safely install and use the towbar, you need to know some rules:

• Despite the fact that the maximum weight of the cargo to be towed is 1300 kg, reaching the maximum point is not recommended to avoid damage and an accident.
• It is not allowed to increase the speed of transport more than 90 km / h.
• The static load on the clutch should not exceed 50 kg.
• Installation and maintenance of all equipment must take place according to the rules provided.
• The installation of additional equipment for safety is best done at a specialized service center.
• It is forbidden to change the design of the traction component. Otherwise, the responsibility is removed from the manufacturer.

Standard kit for installation

If you still decided to install the towbar on the car yourself, then you can buy special equipment both in the car shop and in the showroom. Before you make a purchase, consult the seller and make sure that this kit is for Chevrolet Niva.

The standard set includes the following elements:

• Towbar.
• Power socket.
• Postings.
• Rosette.
• A ball cap.
• Necessary fasteners (bolts, nuts, washers, caps).

In addition to the kit should be attached: the installation instructions and the certificate of the quality of the goods.

Installation of the towbar: "Niva Chevrolet"

The installation process is simple and does not take much time. Some craftsmen cope on their own with the procedure for 10-15 minutes. The main rules of reliable installation and operation in the future are compliance with the installation rules and the use of only certified components.

The installation can be divided into two stages:

Установка силовых элементов. 1. Installation of power elements.

Подсоединение розетки к электрической системе проводки автомобиля. 2. Connect the outlet to the electrical wiring system of the car.

Installation of power structures

устанавливается следующим образом: The hook on the "Niva" with their own hands is established as follows:

• The car is mounted on bridges over the pit.
• The installation locations are being washed.
• The adhesive tape glued on the factory is removed.
• фаркоп на "Ниву". Attached directly towbar on the "Niva".
• The bolts applied in the set with the towbar are treated with grease.
• Install the equipment carefully, tightening the bolts securely and reliably.
• To reduce corrosion, the attachment point should be treated with a special compound.

Electrical connection

предполагает подключение электроники. Installation of the towbar on the "Niva" involves the connection of electronics. This process is quite complex and requires care, because this will determine the quality of the car. If the equipment is connected incorrectly, the combustion of the electronics or the insulation of the wiring is possible.

. To carry out the correct installation you will need a wiring diagram for the car, which, as a rule, goes in the kit . Additionally, look for the pinout diagram.

электрической розетки будет состоять из таких этапов: The process of connecting an electrical outlet will consist of the following stages:

• Turn off the battery.
• Remove the headlamp (installed on the rear of the car).
• Using the circuit, set the wire you need.
• Use insulation protection.
• Screw and seal the wire connection.
• Connect the remaining end to the required socket contact.
• The same procedure is provided for all contacts. In the standard set of them 6. If you want to install a foreign-made trailer or camping, then keep in mind that they have 9 contacts. Additional elements are used to connect household appliances.
• Separate the junction using a special tape.
• Attach the headlight to its original position.
• Connect all electronics and check the operation of the entire installation and standard functions of the car (work of parking lights, turn signals and stop lamps).

Price of equipment

A wide selection of models is available in stores. Шевроле" можно подобрать по цене от 2500 до 5000 рублей. The hook on the "Niva Chevrolet" can be picked up at a price of 2500 to 5000 rubles.

Instead of an afterword

фаркоп на "Ниву", цена на который достаточно приемлема для большинства автовладельцев, – очень удобное и практичное приспособление. Thus, the towbar on the "Niva", the price of which is quite acceptable for the majority of car owners, is a very convenient and practical adaptation. Its quality and ease of use are especially appreciated by lovers of fishing, hunting and recreation outside the city. Installing the same equipment is not an easy task, you just need to be careful and follow the instructions.