Stroborez "Fiolent": reviews, photo, technical characteristics, instruction

According to modern construction standards, engineering communications in residential buildings should not be located outside the structures, as was done before, but in internal canals, which are called strobes. Today, low-current and power electrical cables, pipes for gas supply and water supply, sewerage and heating, as well as the routes of air conditioning systems, have found their place. As an exception, there is an external laying of electrical wiring in buildings of wood type, and gas workers may prohibit laying pipes in furrows. However, the idea of concealed installation is due not only to the issues of aesthetics, but also to the security of network operation.

Need to use

Shrok formation has become an indispensable process of almost any repair or construction. This work is laborious and unpleasant, but it is firmly registered in the price list of installers. Each specialist solves the described problem in his own way. There are those who, if possible, reduce the length of furrows by the method of building boxes, as well as suspension systems and falsehood. Some masters also completely install communications after the completion of rough finishing works such as plastering, pouring screeds and partitioning devices. But in any case, the Stroblas have to do. In this case, it becomes necessary to use the appropriate tool. Specialists and ordinary consumers are increasingly purchasing a shroud-cutter "Fiolent". It is presented for sale in several modifications, which will be discussed below.

Characteristics of the model "Fiolent B230"

The average cost of this tool is 6,000 rubles. Before buying it is important to pay attention not only to the cost, but also to the quality characteristics, among which is the power, as well as the revolutions and the diameter of the circle used. The first parameter is equivalent to 1600 W, while the second is equal to 8500 rpm. As for the diameter of the circle, it is 125 millimeters. The set includes two working discs, which are capable of providing a 30 mm depth of cut.

The weight of the instrument is quite impressive and is equal to 3.9 kilograms. This Russian equipment is provided with a two-year warranty, which indicates the high quality of the device. Safety is provided by protection against unintentional starting, among other things, the unit is equipped with the function of limiting the starting current. For a typical consumer, this characteristic sounds more clearly as a smooth start.

Customer Reviews

Shtoborez "Fiolent B2-30" works due to a sufficiently powerful engine. Consumers like that the aluminum case of the reducer serves as a feature of this equipment. The main handle, if necessary, rotates, among other things, there is an additional adjustable handle. If the equipment is in the on state, then you can not be afraid that it will be accidentally involved. The mechanism will last a long time, since it has built-in protection against overloads.

Among consumers, the "Fiolent B230-30" shroud is quite common, as it comes complete with everything necessary to immediately start work. This includes disks with a nut, an additional handle, a protective cover, and a key. According to users, the equipment is suitable for professionals who work in construction or repair, are engaged in laying cables or pipes. The tool is equipped with a stepless adjustment of the cutting depth, and a smooth start of operation will be provided by a soft start system. During the work, you will not get tired, the operator's hand will not be overloaded, since the trigger can be blocked. This indicates that the "Start" button does not need to be held down during operation.

Shiroboret "Fiolent B230" is convenient in operation, since the width and height of the cut can be adjusted, the maximum values are kept within 30x30 millimeters. An additional handle for easy operation can be installed in one of two positions. When the carbon brushes of the equipment become unusable, they wear out automatically, they are automatically switched off. Thus, the owner of the tool does not have to watch this.

Additional features of the model

The described equipment is extremely functional, to it you can connect a vacuum cleaner by means of a branch pipe, which allows you to work indoors, preventing the formation of dust. The manufacturer guarantees not only safety, but also reliability. These characteristics are provided by an insulated rubber power cord, which will show high strength even in severe conditions of construction sites.

This shtoborez "Fiolent" was developed taking into account ergonomics, therefore its shape provides simple and maximum comfortable control. With the help of an additional handle, the master can confidently hold the tool, thus reducing tension and fatigue during prolonged use. The nodes will not accumulate foreign objects and dust, since ventilation works effectively. This applies to the cooling system, which eliminates the overload of the device.

Characteristics of the model "Fiolent B1-30"

If you are interested in a shroud-saw borer "Fiolent B1-30", then you can buy it for 5300 rubles. Its characteristics are slightly different from those that the above-described instrument possesses. With its help, you can easily and quickly cut brick blocks, metal or concrete products. He does an excellent job of making a strob for an electrical cable. The device can be used as an angle grinder for stripping and grinding stone or concrete.

The equipment is characterized by a long service life and high reliability, which is provided by an improved electric drive and high-quality components. This "Fiolent" shovel-cutter has a power equal to 1100 W, while the groove width and the depth of cut remain the same as the above-described tool. The equipment weighs 3.5 kilograms, and also has a soft start function. The spindle rotation frequency is 6200 rpm. The complete set is added by a nut, a key, a box, an additional handle, and also a flange. There is also a protective cover.

Customer Reviews

This model is most often chosen by consumers for the reason that it combines the functions of a shroud and an angle grinder. As a feature, it is possible to adjust the width and depth of the cut. Brushes are quickly accessible if necessary. Consumers note that depending on the type of work the device can be equipped with a 125 mm circle for stitching, or 150 mm for cutting, it is used in tandem with an additional casing. Soft start provides a gradual set of maximum speed that the tool will support for a long time. Experienced masters note that the aluminum casing of the reducer is capable of providing strength and will be responsible for efficient heat removal. The engine does not overheat, even if the loads are extremely high.

Characteristics of model B3-40 F0054

On sale there is also a shroud-cutter "Fiolent B3-40", which you can read about in the article. Its cost is higher in comparison with the two above-described models and is 7400 rubles. This equipment is designed for laying a mortar with dry cut technology in the walls of limestone blocks, shell rock, brick, and also from reinforced concrete. The tool can be used for metal cutting, stripping, grinding and processing of concrete, as well as stone. The power of the device is greater and is equivalent to 1600 watts. In connection with this, the maximum width of the groove is also increased, which is 41 millimeters. This also applies to the depth of the cut, its maximum value is equivalent to 41 millimeters. The spindle rotation frequency is 9000 rpm. The diameter of the disc is 150 millimeters. Along with the more impressive characteristics of the model, we should also note the increased weight, which is 4.3 kg.

Reviews

Choosing shtroborez "Fiolent B3-40", consumers note that they are especially attracted by the combination of two tools in one product. Among other things, the operator can smoothly adjust the depth of the groove. As the buyers emphasize, it is possible to process all kinds of materials using a tool, using it as an angle grinder. Adjust the width of the groove can be stepped using washers. The overload protection is provided by an electronic built-in system. You do not have to worry about safety, since the drive has double insulation. If you decide to buy such a shroud-cutter "Fiolent", then at the time of removal of the protective cover you can expand the range of works performed.

Consumers especially note that the kit has everything you need, including a branch pipe to keep the workplace in a perfectly clean condition. The windings of the electric drive are armored, therefore they are reliably protected from contact with dust. At the moment of switching on the gearbox is reliably protected from overload due to smooth start-up. The tool is equipped with removable covers, which allow you to replace the worn brushes in a short time. With the help of convenient access it will be possible to monitor their condition. Experienced users note that the cutting tool can be changed with the help of a convenient fixation of the spindle.

Instruction manual for models B1-30 and B3-40

Shtoborez "Fiolent B1-30" must be periodically subjected to maintenance. It can be periodic or planned. In the first case, the work is done by the consumer himself, he cleans the tool of pollution after completion of work. In the process of operation, it is possible to tighten the fasteners, if such a need arises. Scheduled maintenance should be done every 50 hours of operating time. In doing so, the master must check the condition of the armature manifold.

Lubrication of the gear unit must be inspected and replaced if necessary. This also applies to brushes. If, when inspecting the Fiolent B3 shroud, you notice that the length of the brushes is less than 8 millimeters, then they should be replaced. Their terminal ends should not be stretched, it is important to ensure free movement of the elements in the holder. After you have made a replacement, the furrow should be turned on and left idling for brushing. It takes about 3 minutes.

Shtoborez "Fiolent B1-30", the reviews of which were presented above, should be lubricated gearbox, which should be carried out using a mixture that consists of 70 percent lubricant LS-1P from 30 percent oil I-20A. However, you must first get rid of the old grease. The service life of the sow is 6 years, however this period is valid if the purchaser observes the operating manual. Use this equipment in a moderate climate or a temperature range of -15 to +40 degrees. The humidity should be equal to 70% or less.

It is important to ensure that the body does not get atmospheric precipitation, and the equipment itself is not in conditions of excessive dust. The "Fiolent" shredder, the feedback about which, perhaps, will allow you to understand whether or not to purchase this device has double insulation, this indicates that the unit is not necessary to ground. Before starting work, check the completeness and securely secure the parts. The master must perform an external inspection, checking that the power cord is OK. The enclosures of the electric drive must be intact, as well as the handle-lining.

Conclusion

Before you begin to work, you can check how good the tool is, to do this, it is launched and allowed to work in idle mode. When installing circles, it is important to observe the maximum care, this also applies to the moment when the equipment is moved with the established circles. Wrong movement can not only cause serious injury, but also damage an expensive tool. Also, therefore, the desktop needs to be cleaned of foreign objects, which can interfere with convenient placement of the unit on the table during operation and during breaks.

Shiroboresis "Fiolent" should be used exclusively for its intended purpose. If necessary, install circles, spindle, and also the nut of the bushing must be cleaned of contaminants. The nut is tightened with the key that is included in the delivery. Between the two circles, at least one sleeve must be installed. When setting the circles, the arrows indicating the direction of travel must coincide with the arrows on the gearbox.