Pasting vinyl with your own hands

Many car owners use a vinyl film to protect the paintwork of the machine. If necessary, this material can be glued on the body of the vehicle. The main thing is observance of all rules.

How much film do you need

Pasting with vinyl cars is a simple process. However, it is important to correctly calculate the amount of material. It should take into account some of the nuances, for example, the kind of film and body type. Also of special importance is the experience of the master. If you are a beginner, then the material is better to take more, since defects and errors are not ruled out.

Do not forget that the vinyl film can have individual features, among which you need to highlight an elastic and strong stretching. It is for this reason that experts make the following calculations of the material:

1. For pasting an SUV, 23-30 meters of film is required.
2. For the crossover - 18-23 meters.
3. For a sedan - 17-19 meters.

Of course, this data is relative. However, thanks to them, the car owner has an approximate idea of how much material to buy. If pasting a car with vinyl you can not do it, then you should ask for help in specialized salons. Here you will be helped to choose the material and apply it to the body of the vehicle.

Is it possible to auto-glue the car

Pasting self-vinyl with your own hands requires accuracy. Nowadays it is the most popular way of transforming a vehicle. In fact, working with vinyl film is very simple and easy. Due to this, the material can be applied to the body of the car by yourself. In just a day you can completely change the look of the car. In this way, you can give the body any color, apply the original pattern or ornament. Also vinyl film allows you to place on the vehicle mobile advertising of your company.

Technology

Pasting vinyl with a car has many advantages, but most importantly - the convenience and ease of applying the material. At the moment, several main technologies are singled out - wet and dry.

The latter method is the most difficult. Dry self-adhesive vinyl with their own hands should be carried out using special tools. Such work requires preliminary training and experience. It should be borne in mind that to the dry surface the film sticks much faster, and therefore smooth folds after application is almost impossible. It is for this reason that it is better to pasted the dry process in a specialized salon. The main advantage of this method is that vinyl is applied only once and serves for a long time.

Wet sticking with vinyl cars is much easier. The film is much easier to apply to pre-wetted parts of the vehicle than to dry ones. At any time, the material can be removed and moved to another location. The main drawback of this method is the probability of accumulation of water under the film after completion of work. Of course, after complete drying, the moisture will evaporate, but in its place unpleasant vesicles may form. However, wet vinyl pasting with your own hands avoids more gross errors.

What you need to work

Before you start, you need to prepare tools for pasting with vinyl. You may need:

1. Painting Scotch.
2. White spirit or alcohol.
3. Sprayer and soap solution.
4. Professional hair dryer.
5. Knife clerical or scissors.
6. Felt or plastic squeegee.

Preparation and commencement of work

If you are not confident in your own abilities, then you can learn how to paste the car with vinyl. Before you get started, you need to prepare a vehicle. The surface of the car should be thoroughly polished. In this case, you must immediately remove all irregularities. In addition, it is necessary to degrease the more complex sections of the interior and body. In the end, carefully clean each corner of the vehicle with a dry cloth. After preparation, you can start applying the film.

Pasting vinyl car occurs in several stages. In the process of work it is necessary to take into account some nuances. Start the pasting from the smallest radius on the entire surface. This step allows you to pull the film around the body, without squeezing it while doing so. It should also take into account the ability of the material. Vinyl stretches by about 30-50%, but shrinks by only 10%.

After the film is stretched over the entire surface, you can begin to heat it. The temperature should not be more than 70 ° C. Otherwise, the material can not just lose color, but even collapse.

How to glue

So, how does the car sticking on vinyl? The testimonies indicate that the material should be applied in one piece for each part of the vehicle. In this case, lay the film on a pre-prepared and uniform surface. If it is necessary to make several pieces of vinyl, experts recommend making a small overlap of one layer on the second. This will protect the canvas from getting under it air and moisture.

If it is necessary to cover more rough surfaces and complex shapes, then it is impossible to adhere the corners of the hanging material. It is very difficult to break, without causing any damage and without breaking it. It is for this reason that professionals recommend that the surface be treated with an adhesive with special solutions.

After the vinyl is pasted, experts do not advise to use the vehicle. The film must dry well. This takes about 10 days.

Troubleshooting

What to do if the pasting of a vinyl car was not entirely successful? When applying the material on the surface of the body, do not allow air to enter the canvas, as well as its strong extension. If you can not avoid such errors, you should carefully press the vinyl with a damp cloth, and then walk through the dangerous area with a stream of hot air. As a result, the film will shrink slightly. This will eliminate the defect.

The Right Tips

The easiest way to update the surface of the body - it's pasting cars with vinyl. The photos of the vehicle presented in the review confirm this. However, many mistakes are made during the application of the film.

Fundamental rules:

1. The vehicle must be washed and degreased before gluing. Many car owners believe that this is absolutely not necessary.
2. The body must be cleaned.
3. If the canvas is large, you should ask for help. Glue film alone is not so simple.
4. The film can not be glued without a preliminary fit. Before you tear off the assembly and remove the substrate, the material should be tried on the part.
5. The substrate should be removed immediately before the workpiece is pasted. Do not wet it with water.
6. Rolling the squeegee material follows from the middle of the canvas to its edges.
7. When working with vinyl it is necessary to heat it with a special hair dryer. The temperature of the air flow should not exceed 70 ° C.
8. After finishing the pasting, it is necessary to dry all treated surfaces with warm air. Completely vinyl is stuck only after 10 days after application. During this period, you should not drive a car.

If you are not confident in your own abilities, then the work should be entrusted to experienced masters from the salon. Otherwise, a spooky economy can result in additional costs. After all, pasting a vehicle with vinyl is an art.