Modeling the pattern of children's clothing

Parents of young children at least once in their lives have always come up with the idea of trying to sew clothes with their own hands. This is due to the non-standard nature of the child's figure and the inability to find a suitable and well-seated thing, with a high price of goods, and maybe the reason for this desire is the creation of exclusive and original clothes for children. In any case, it's worth trying to master this lesson.

To sew a wardrobe the child will need: fabric, accessories, scissors, needles, crayons and tailor's pins, and most importantly, patterns of children's clothing. Properly composed pattern - pledge of sewing the right thing. Let's try to draw a drawing of trousers for the boy. It is necessary to make a drawing once, and then use it to sew trousers of different length and shorts. To build a pattern of children's clothing, prepare paper, ruler and pencil.

First you need to remove the following measurements from the boy: the length of the trousers DB - measured along the leg from the waist to the bottom, the length of the trousers to the knee of the DBK - from the waist to the knee. These two measures are taken simultaneously. Half-fetter waist Fri - half of the measured waist measurement at its narrowest part is taken. Semi-hip hip Pb - horizontal measurement, passing through the middle of the buttocks, it needs to be removed taking into account the abdomen, preferably on inspiration. All measurements are recorded as a table.

So, we proceed to build a pattern of children's clothing, namely - trousers for the boy. In the left corner of the top of the prepared sheet, the first point A is marked, and the length of the trousers Db-point B is laid down from it according to the measurement taken, the length of the pants Db is point B, and the Dbk-point B is marked on this same length. At these points, and at the point A, horizontal lines are drawn.

Then half of the PB measurement is laid horizontally from point A with the addition of 1 cm. A new label is called A1. Downward from the point A, Pb plus 2 cm is deposited. This will be the point of T. A horizontal line is drawn from the point T, equal to the distance AA1, and the point T1 is set . The distance AG is divided into three equal segments. The lower point will be D, between D and A - the point E, which will participate in the formation of the lateral seam.

From the point T1, a tenth of the distance Pb is deposited to the right. This will be T2. From the point Г1 upwards 4 cm is measured, the point is called - 4. This point and Г2 are connected by a smooth concave curve, which, as it were, is pressed against Г1. The segment ГГ2 is divided into two equal parts, in the middle of the segment a vertical line is drawn through the whole pattern. At the intersection with the waistline is designated A1, with the knee line - B1, with the bottom line - B1.

The next step in the construction of a pattern of children's clothing - the determination of the width of the trousers in the knee, from point B is measured to the right 2.5 cm, this will be point B2. From B1, a distance equal to B1B2 is laid to the right, and point B3 is put. Similarly points B2 and B3 are marked on the line of the bottom of the trousers.

To draw the line of the side cut, from point A to the right is laid 1 cm - point 1. Now a smooth line connecting points 1; E; D; B2, from B2 to B2, the line is a straight line.

The step line is drawn between the points A1; 4; G "; B3 is a smooth line and from B3 to B3 is a straight line.

Similarly, the back half of the trousers is constructed with slight differences. In the drawing, it is necessary to provide darts. It remains to cut, and the pattern of children's clothes is ready!

Before cutting the tissue, you need to recheck the pattern - attach to the child and see if it matches the height, the desired length of the trousers. Of course, the process is quite laborious. You can try to look for ready-made patterns of children's clothes on the Internet or magazines on sewing.