Means for washing the car's engine: advice on choice and feedback

Today, many drivers ask themselves, what is the best way to clean the engine and how often can it be used? On the shelves of specialized stores you can find everything you need. However, not all compounds are effective. But it is necessary to wash the engine, as it is the heart of the car. It needs proper care.

Opinion of specialists

At the moment, the opinions of specialists on how often and how to clean the engine of the vehicle, greatly differ. Part is sure that the procedure should be conducted only once a year, and others - every few years. However, all experts say that it is necessary to wash the engine. It is desirable to use special means. After all, road reagents that settle in the engine compartment, have a negative impact on the work of the vehicle.

In addition, the contaminated unit is subject to overheating much more often than clean. After all, a layer of accumulated dirt simply reduces heat output. Of course, because of the accelerated wear of all the parts significantly reduces the working life of the motor. Oily stains, according to experts, increase the risk of fire, as well as poorly affect the wiring. It is worth considering that the contaminated engine in maintenance is more complex. And when selling a vehicle such a state of the motor just frightens off the buyers.

Can I use self-made tools

Usual household chemicals can greatly damage the motor. That is why only special substances should be used for washing the unit. If there is no desire to spend money on the means for the car, then you can make the necessary composition yourself. This will take a little time.

So, how to make a vehicle washing machine. It is enough to dilute in a water usual washing powder or a gel for utensils. It should be noted that such compositions do not allow achieving the desired result. And the time for washing will go much more.

During the preparation of a means for washing the engine, it is worth noting components that are easily ignited, for example, gasoline or kerosene. It is not safe. If such substances are not removed completely, there is a risk of causing ignition of the power unit during the operation of the vehicle. Therefore, experts do not recommend saving on the car and buying special compounds to wash the engine.

Types of chemistry for transport

Means for washing the engine are of several types:

1. Universal. This compound is suitable for removing many types of pollution.
2. Specialized. This remedy is fighting with impurities of a certain type.

Similar compounds are sold in different containers, for example:

1. In containers of glass.
2. Aerosol cans.
3. Bottles are made of plastic.

The last two species are considered the safest and most convenient. The concentrated gel allows to prepare a solution of the necessary concentration, which is proportional to the degree of engine contamination. To choose a good tool for washing the engine, you should carefully study the composition, as well as pay attention to the name of the company that manufactured the product. Do not buy chemistry of unknown brands.

Some nuances

The means for washing the engine differ in composition. However, there is no radical mixture that can remove any type of pollution and any complexity. Pouring even a whole jar of a similar composition, you can be very disappointed. In any case, the motor will not look like a new one. But the instructions about it are so beautifully written. As show reviews, all the means for washing the car engine are similar in principle to the action. It is enough to sprinkle the contents of the still warm engine and after about ten minutes wash it off with water.

However, in most cases, the manufacturer does not indicate under what pressure to wash off the dirt. Also not written and the water temperature. If on the surface of the motor a thin layer of dirt and quite a bit of oil, then with the task set, almost any composition will cope. The contaminants quickly dissolve, and water will remove the entire suspension. As a result, all surfaces of the unit will be clean.

Strong and medium pollution is much more difficult to remove. In most cases, one capacity is not enough.

The "Engine Degreaser"

This means for washing the engine from outside is made by the American company Prestone. Composition is produced in the form of an aerosol. The cost of one can is about 120 rubles. This composition was tested. Used it before a professional car wash on the engine of the car, which did not know the car wash from the first run. Externally, the engine was not particularly contaminated. There was no thick layer of mud. The agent was gently applied to the surface of the power unit and waited 10 minutes. After that, the composition was washed away with water. The oil and dirt deposits were easily washed off by water, but not in hard-to-reach places. Long had to tinker with some secluded corners of the engine compartment.

This means for washing the engine of the car by the hands almost did not clear the painted surfaces from the collected dirt and it had to be wiped by hand. Well, the composition copes well with a touch of brake fluid and deposits on an oil basis. But road dust practically does not take. To clean the engine with an average degree of contamination one can not be enough.

Cleaner "Consol"

This tool is made in Russia. Also available as an aerosol. A balloon with a volume of 52 milliliters costs about 70 rubles. The manufacturer indicated that this compound is safe for many paint and varnish, plastic and rubber coatings. Also in the manual there are some nuances that you should pay attention to. So, the means for washing the engine with your own hands should be applied to all surfaces that should be cleaned, and after five minutes, rinse with water under a large head. But for the removal of carbon and grease, it is better to use the minimum amount of liquid. This part of the instruction is not clear. It is quite difficult to imagine a combination of a minimum amount of water and a strong head. Most likely, this requires a Kercher device. If this is not the case, then ordinary water from a water pipe with a small head will do. As a result, the remedy removes only minor impurities. Strongly oily places remain. And road dirt has to be removed with a brush.

Cleaner "Sintec"

This cleaner is sold in a plastic container. For a bottle with a volume of 500 milliliters, you will have to shell out about 70 rubles. These facilities are being used to wash the car engine in Russia.

This cleaner is designed for periodic cleaning of the motor during the use of transport, as well as before repairing the unit. As the reviews show, it is inconvenient to apply such a compound on the surface of the engine, since a wide torch comes from the atomizer. However, its head for a long distance is not enough. And it's not always possible to get close to the hidden parts of the motor.

The tool itself is not very active. It weakly dissolves the brake fluid and oily stains, and almost no road dust. But the smell of "Sintec" smells of kerosene. Which, in turn, greatly worries. Judging by the reviews, the deposits that would have to get wet under the influence of the means, do not want to lag behind the surfaces. And the water that has got on already cooled down details of the car, simply rolls down from them, as from oil. As a result, dirt stays on the motor. This cleaner is recognized by consumers as the most inefficient. Use such a composition can be used solely to remove traces of insects, poplar buds and bitumen stains on the body.

Means for washing the car engine «Turtle Wax»

This cleaner is available in England and is sold in a plastic container equipped with a manual spray gun. 300 milliliters of this composition costs about 250 rubles.

As the reviews show, this substance is designed to remove only certain contaminants. For total processing the product simply does not fit. The composition perfectly removes traces of brake fluid and oil. Its residues are easily washed off with water. That's just dirt road cleaner can not clean.

The capacity in which Turtle Wax is sold is small in size and easy to use. From the sprayer, the jet can be sent to any place at a sufficiently large distance. This is one of the main advantages of aerosol cleaners.

Cleaner for chains of bicycles and motorcycles «CATENE LIQUI MOLY»

This is a German engine cleaner. Reviews show that this cleaner falls out of our rules. However, the effect from use is noticeable immediately. The composition perfectly copes not only with the stains of the brake fluid and oil, but also removes road dirt from the varnishes.

Special manipulation of the cylinder does not require. The jet is strong enough and can be reached to the farthest places if necessary. The only thing that is required is to hold the container vertically. Otherwise, only air will leave it. The resulting suspension is washed off very easily. After applying the composition, the surfaces are clean. It costs 500 milliliters of "CATENE LIQUI MOLY" cleaner about 186 rubles.

The composition of the brand "Abro"

Under this brand, several products are produced: a cleaner and a foam cleaner. In the first case, the capacity is about 130 rubles and has a weight of 510 grams, in the second - 120 rubles and weight 453 grams.

These are almost identical tools with different packaging designs. In both compositions, the font of designations is the same. However, there is a significant difference in the instruction. Foam cleaner must be shaken before use. The second means should be sprayed at a distance of 30 centimeters so that it does not fall on the paintwork. It is worth noting that both purifiers foam.

The compositions work equally. After application from a small distance, a rather abundant foam forms, which slowly settles. The jet is also clearly visible. This will allow you to send it to the right place.

As for the effect, many consumers in their reviews praise these cleaners. Both compounds can cope well with stains of oil and brake fluid. Road dirt is also partially soluble. It is worth noting that both compositions are easily washed away with water with a gentle jet. To remove the remnants of road dirt you can use a brush. When exposed to the skin, cleaners do not cause unpleasant sensations and are easily washed off. At use, there is a slight smell of kerosene.

What to choose

After much searching and experimentation, every car enthusiast finds the perfect cleaner. Means for washing the engine are completely different. Some are able to remove only oily stains, others cope with all kinds of pollution. Of the above mentioned compounds, the most convenient and effective are the "Abro" cleaners. The "CATENE LIQUI MOLY" tool, which is designed to remove various contaminants from chains of bicycles and motorcycles, showed itself well. Although this composition is intended for other purposes, it perfectly copes with various deposits on the motors. The rest of the compounds are better to use when the engine is slightly dirty.

In conclusion

When using any product, it is worthwhile to carefully study how to correctly apply and wash it off. The final result depends on this.

A means for washing the engine from oil, brake fluid and road dirt should be selected carefully. The main rule is that there are no flammable components. The wash takes about 30 minutes. To conduct the procedure is several times a year. This will maintain the cleanliness under the hood of the car.